A Case Report of Nonkeratinizing Carcinoma of the Maxillary Sinus Masquerading as a Cystic Lesion

Malignant tumor of the paranasal sinus is a rare, occurring most frequently in the maxillary sinus. Carcinomas of the maxillary sinus are usually diagnosed at the advanced stage because most tumors have no symptom or nonspecific symptoms such as pain, nasal obstruction, rhinorrhea, and epistaxis. In addition to these features, it is difficult to distinguish carcinoma from inflammatory or cystic lesion on imaging study until the carcinoma destroys the surrounding structures. Therefore, the diagnosis is prone to be delayed. Here, we report a case of an 83‐year‐old male with nonkeratinizing carcinoma on the maxillary sinus, which was initially misdiagnosed as a cystic lesion. The aim of this study is to emphasize the effort for early diagnosis in order to improve prognosis and avoid inadequate treatment.ope

Characteristics of a new cone beam computed tomography

PURPOSE: To determine the physical properties of a newly developed cone beam computed tomography (CBCT). MATERIALS AND METHODS: We measured and compared the imaging properties for the indirect-type flat panel detector (FPD) of a new CBCT and the single detector array (SDA) of conventional helical CT (CHCT). RESULTS: First, the modulation transfer function (MTF) of the CBCT were superior to those of the CHCT. Second, the noise power spectrum (NPS) of the CBCT were worse than those of the CHCT. Third, detective quantum efficiency (DQE) of the indirect-type CBCT were worse than those of the CHCT at lower spatial frequencies, but were better at higher spatial frequencies. Although the comparison of contrast-to-noise ratio (CNR) was estimated in the limited range of tube current, CNR of CBCT were worse than those of CHCT. CONCLUSION: This study shows that the indirect-type FPD system may be useful as a CBCT detector because of high resolution.ope

A Case Report of Precursor T-cell Leukemia/lymphoma Accompanying Mental Nerve Invasion without Recurrence for Central Nervous System

Facial numbness restricted to the distribution of the mental nerve(mental neuropathy) is called "numb chin syndrome". The clinical importance of this syndrome is associated with first recognition of involvement of malignant diseases. The malignant neoplasm with numb chin syndrome show rapid progression and high mortality. We present a 43-year-old female who had been treated by radiotherapy for precursor T-cell leukemia/lymphoma involving the central nervous system(CNS) previously and later developed mental nerve invasion without central nervous system recurrence. MRI images revealed the CNS tumor mass remitted, and there was no identified peripheral nervous system(PNS) involvement including the mental nerve invasion, nevertheless the patient complained of consistent numbness and pain on right mandibular area. This is the first case of precursor T-cell leukemia/lymphoma accompanying mental nerve invasion without recurrence for central nervous system. Proper interpretation for mental neuropathy may lead to the prompt diagnosis and therapeutic interventionope

A Case Report of Small Cell Osteosarcoma of the Anterior Mandible

Small cell osteosarcoma of bone, which was first described in 1979, is an unusual variant of osteosarcoma. Osteoid production by tumor cells is frequently focal or minimal, making the differential diagnosis with other small round cell tumors of bone difficult. Here, we present a rare case of small cell osteosarcoma of the mandible appearing as bony bulging mass in 31-year-old male who has neither tenderness nor paresthesia. Histologically, the tumor contains hypercellular cartilage and abnormal osteoid associated with small round to ovoid malignant cells. Awareness of small cell osteosarcoma should be emphasized because it has worse prognosis than both other small round cell tumor and conventional osteosarcoma.ope

A radiologic study of ameloblastoma using computed tomography

Purpose : To reveal what is the distinct differential diagnostic differences between unicystic ameloblastoma and solid or multicystic ameloblastoma. Materials and Methods : 56 cases of ameloblastoma were retrospectively reviewed and evaluated among the patients who had taken CT scans at the department of Oral & Maxillofacial Radiology in Yonsei University Dental Hospital from January 1996 to December 2003. Results : In 56 cases, 21 cases (37.5%) were unicystic ameloblastoma, 35 cases (62.5%) were solid or multicystic ameloblastoma. Only 1 case (4.8%) of unicystic ameloblastoma and 4 cases (11.4%) of solid or multicystic ameloblastoma were occurred in maxilla. 13 cases (61.9%) of unicystic ameloblastoma were observed as unilocular, and 8 cases (38.1%) as lobulated. 5 cases (14.3%) of solid or multicystic ameloblastoma were observed as unilocular, 13 cases (37.1%) as lobulated, and 17 cases (48.6%) as multilocular. In the results from the measurements after correction of the buccolingual widths and heights to the mesiodistal lengths, there is a statistically significant difference between unicystic ameloblastoma and solid or multicystic ameloblastoma in ANCOVA test (p⁄0.05). Hounsfield units in the lesion were 24.9?.8 HU in unicystic ameloblastoma, 31.2?1.5 HU in solid or multicystic ameloblastoma. There is no statistically significant difference (p?.05). Conclusion : Characteristic differences between unicystic ameloblastoma and solid or multicystic ameloblastoma is that there is higher prevalence of solid or multicystic ameloblastoma that have lobulated or multilocular patterns. To measure the Hounsfield units in the lesion is helpful, but it is not a differential diagnostic point between unicystic ameloblastoma and solid or multicystic ameloblastoma.ope

Factors Influencing Superimposition Error of 3D Cephalometric Landmarks by Plane Orientation Method Using 4 Reference Points: 4 Point Superimposition Error Regression Model

Superimposition has been used as a method to evaluate the changes of orthodontic or orthopedic treatment in the dental field. With the introduction of cone beam CT (CBCT), evaluating 3 dimensional changes after treatment became possible by superimposition. 4 point plane orientation is one of the simplest ways to achieve superimposition of 3 dimensional images. To find factors influencing superimposition error of cephalometric landmarks by 4 point plane orientation method and to evaluate the reproducibility of cephalometric landmarks for analyzing superimposition error, 20 patients were analyzed who had normal skeletal and occlusal relationship and took CBCT for diagnosis of temporomandibular disorder. The nasion, sella turcica, basion and midpoint between the left and the right most posterior point of the lesser wing of sphenoidal bone were used to define a three-dimensional (3D) anatomical reference co-ordinate system. Another 15 reference cephalometric points were also determined three times in the same image. Reorientation error of each landmark could be explained substantially (23%) by linear regression model, which consists of 3 factors describing position of each landmark towards reference axes and locating error. 4 point plane orientation system may produce an amount of reorientation error that may vary according to the perpendicular distance between the landmark and the x-axis; the reorientation error also increases as the locating error and shift of reference axes viewed from each landmark increases. Therefore, in order to reduce the reorientation error, accuracy of all landmarks including the reference points is important. Construction of the regression model using reference points of greater precision is required for the clinical application of this model.ope

Impacted supernumerary tooth in coronoid process: a case report.

Impaction of tooth is a situation in which an unerupted tooth is wedged against another tooth or teeth or otherwise located so that it cannot erupt normally. The supernumerary tooth is also called as hyperdontia and defined as the condition of having additional tooth to the regular number of teeth. The most common supernumerary tooth is a mesiodens, which is a mal-formed, peg-like tooth that occurs between the maxillary incisors. The supernumerary tooth is commonly impacted but they are frequently impacted on maxilla. Ectopic impaction of supernumerary tooth on mandibular condyle, coronoid process, ascending ramus, and pterygomandibular space is very rare condition. In this case, we report a case of impacted supernumerary tooth on mandibular sigmoid notch without definite pathologic changeope

A Case Report of Osteogenic Sarcoma Arising from Florid Osseous Dysplasia

Osteogenic sarcoma is primary malignant bone tumor. It can arise de novo or from the benign precursors lesions, like Paget’s disease, giant cell tumor, chronic osteomyelitis, osteoblastoma, and fibrous dysplasia. Here, we present a case of osteogenic sarcoma arising from florid osseous dysplasia appearing as a rapidly growing bony bulging mass in 44-year-old Korean female who had at first been non-symptomatic, but later suffered from the numbness of chin and lower lip. The radiologic images revealed the mixed radiopaque- radiolucent intraosseous lesions throughout the mandible, which were diagnosed as florid osseous dysplasia pathologically. But only after 6 months, the lesions were substituted by the radiological ill-defined diffuse bony sclerotic lesion with bone destruction, accompanying the interrupted periosteal bone formation, which were pathologically diagnosed as osteogenic sarcomas. These serial clinicopathologic changes imply the malignant progression of florid osseous dysplasia rather than the collision of benign condition, florid osseous dysplasia and malignant tumor, osteogenic sarcoma. The possibility for fibro-osseous lesion of the jaw as premalignant lesion should not be overlooked; therefore, periodic check-ups for the lesions are necessary. Proper evaluation and interpretation for clinical neural symptom and radiologic change of bone density may lead to the correct differential diagnosis and therapeutic intervention.ope

Three-dimensional image analysis of the skull using variable CT scanning protocols-effect of slice thickness on measurement in the three-dimensional CT images

Purpose : To evaluate the quantitative accuracy of three-dimensional (3D) images by means of comparing distance measurements on the 3D images with direct measurements of dry human skull according to slice thickness and scanning modes. Materials and Mathods : An observer directly measured the distance of 21 line items between 12 orthodontic landmarks on the skull surface using a digital vernier caliper and each was repeated five times. The dry human skull was scanned with a Helical CT with various slice thickness (3, 5, 7 mm) and acquisition modes (Conventional and Helical). The same observer measured corresponding distance of the same items on reconstructed 3D images with the internal program of V-works 4.0/supTM(Cybermed Inc., Seoul, Korea). The quantitative accuracy of distance measurements were statistically evaluated with Wilcoxons' two-sample test. Results: 11 line items in Conventional 3 mm, 8 in Helical 3mm, 11 in Conventional 5mm, 10 in Helical 5mm, 5 in Conventional 7mm and 9 in Helical 7mm showed no statistically significant difference. Average difference between direct measurements and measurements on 3D CT images was within 2mm in 19 line items of Conventional 3mm, 20 of Helical 3mm, 15 of Conventional 5mm, 18 of Helical 5mm, II of Conventional 7mm and 16 of Helical 7mm. Conclusion: Considering image quality and patient's exposure time, scanning protocol of Helical 5mm is recommended for 3D image analysis of the skull in CT.ope

전도성 고분자의 광전기전도도와 분자전자학적 특성 연구

Thesis (doctoral)--서울대학교 대학원 :물리학과,1995.Docto