10 research outputs found
銅スクラップリサイクルの最適プロセスフローシート
銅スクラップ処理用の新しい乾式処理プロセスの実用化をめざして,銅スクラップの酸化精錬処理により生成する酸化銅基スラグの処理方法の開発研究を行い, 以下の知見を得た。 1.ブラックカッパー化による銅の回収ならびにその精製炭素還元では,ブラックカッパーの純度が若干悪くても,後の酸化銅基スラグによる精錬に影響を及ぼさないことから,むしろ回収率が良くなる条件で還元するのが好ましいことが分かった。また,鉄およびFe-C合金を還元剤とした場合についても検討した。本研究における最適還元処理条件としては,銅純度および銅回収率の観点から1623K,炭素粉末添加の条件となった。 次にCu_2O-15mass%SiO_2スラグによるブラックカッパーの酸化精錬では、不純物濃度はすべて数10mass ppm以下にまで低下し,銅純度も99.9%以上まで高純化された。したがって,還元処理により回収した銅は,リサイクルプロセスに直接戻すことが可能である。 2.硫化物化による銅の回収硫化物中の銅品位および硫化率が最も高くなる条件では,Sn,Pb,Zn,Coが硫化しやすく,Si,Cr,Alが硫化しにくいことが分かった。また,硫化物中に含まれる各不純物元素の合計量は,銅製錬所に戻す際に問題に成り得ない程度の量であった。したがって,使用済み酸化銅基スラグを銅品位の高い硫化物として回収でき,これを銅製錬所に戻すことは十分可能である。 3.湿式処理による銅の回収スラグをできるだけ細かく粉砕し,343K,硫酸4規定において浸出を行うのが,本実験条件内において,最も高い抽出率で銅と不純物を回収することができる条件であった。科学研究費補助金 研究種目:基盤研究(B)(2) 課題番号:10555255 研究代表者:藤澤 敏治 研究期間:1998-2000年度research repor
Mean stage of Dupuytren's disease in men and women classified in decades
<p><b>Copyright information:</b></p><p>Taken from "50 years experience with Dupuytren's contracture in the Erlangen University Hospital – A retrospective analysis of 2919 operated hands from 1956 to 2006"</p><p>http://www.biomedcentral.com/1471-2474/8/60</p><p>BMC Musculoskeletal Disorders 2007;8():60-60.</p><p>Published online 4 Jul 2007</p><p>PMCID:PMC1950875.</p><p></p
Mean stage of Dupuytren's disease per Finger in all Patients from the year 1988 to the year 2006
<p><b>Copyright information:</b></p><p>Taken from "50 years experience with Dupuytren's contracture in the Erlangen University Hospital – A retrospective analysis of 2919 operated hands from 1956 to 2006"</p><p>http://www.biomedcentral.com/1471-2474/8/60</p><p>BMC Musculoskeletal Disorders 2007;8():60-60.</p><p>Published online 4 Jul 2007</p><p>PMCID:PMC1950875.</p><p></p
Optimal arrangement of TEV sensors for diagnosing oil-filled transformer
One of insulation deterioration diagnostic techniques of oil-filled transformers is to detect partial discharge (PD) which is a precursory phenomenon of dielectric breakdown.We now focus on a transient earth voltage (TEV) sonsor for measuing the PDs in oil-filled transformers. The radiating electromagnetic waves from a PD source induces the surface current and forms a pulse-like voltage variation on the tank surface of an oil-filled transformer. The TEV sensor mounted on the tank measures the voltage variation. The tank functions as a receiver of electromagnetic waves, and therefore the relative positional relationships between a PD source and a TEV sensor may strongly influence on the measurement accuracy.
We carryied out numerical analyses of the current density, induced by electromagnetic wave on the tank surface of oil-filled transormer, by using he general-purpose physics simulation software COMSOL ultiphysics. Based on the results, we evaluated the optimal arrangement of TEV sensors.departmental bulletin pape
2段連続式バイオリアクターを用いたタマネギ食酢の製造法と食品機能性開発
application/pdfA two-stage continuous-tank reactor was developed to optimize the production of onion vinegar, and the onion vinegar produced was studied to determine its benefits for human health. The ”Silan ring” porous ceramics support was available to immobilize microorganisms, maintain higher mechanical strength and provide a stable rate of alcohol production even at higher dilution rates than 1.2 hr^, without wash-out. The forced cyclic operation of reaction temperature yielded an increase of 25% for amino acids and 35% for organic acids. Five men who ingested onion vinegar for 10 days were found to have testosterone increases in the blood 22% higher than the control cases.departmental bulletin pape
