Optically thin composite resonant absorber at the near-infrared band: a polarization independent and spectrally broadband configuration

Cataloged from PDF version of article.We designed, fabricated, and experimentally characterized thin absorbers utilizing both electrical and magnetic impedance matching at the near-infrared regime. The absorbers consist of four main layers: a metal back plate, dielectric spacer, and two artificial layers. One of the artificial layers provides electrical resonance and the other one provides magnetic resonance yielding a polarization independent broadband perfect absorption. The structure response remains similar for the wide angle of incidence due to the sub-wavelength unit cell size of the constituting artificial layers. The design is useful for applications such as thermal photovoltaics, sensors, and camouflage. (C)2011 Optical Society of Americ

Merits of organizational metrics in defect prediction: An industrial replication

Defect prediction models presented in the literature lack generalization unless the original study can be replicated using new datasets and in different organizational settings. Practitioners can also benefit from replicating studies in their own environment by gaining insights and comparing their findings with those reported. In this work, we replicated an earlier study in order to investigate the merits of organizational metrics in building defect prediction models for large-scale enterprise software. We mined the organizational, code complexity, code churn and pre-release bug metrics of that large scale software and built defect prediction models for each metric set. In the original study, organizational metrics were found to achieve the highest performance. In our case, models based on organizational metrics performed better than models based on churn metrics but were outperformed by pre-release metric models. Further, we verified four individual organizational metrics as indicators for defects. We conclude that the performance of different metric sets in building defect prediction models depends on the project’s characteristics and the targeted prediction level. Our replication of earlier research enabled assessing the validity and limitations of organizational metrics in a different context.This research is supported partially by TEKES N4S programme in Finland and in Canada

A perspective on radical transformations to sustainability: resistances, movements and alternatives

A transformation to sustainability calls for radical and systemic societal shifts. Yet what this entails in practice and who the agents of this radical transformation are require further elaboration. This article recenters the role of environmental justice movements in transformations, arguing that the systemic, multi-dimensional and intersectional approach inherent in EJ activism is uniquely placed to contribute to the realization of equitable sustainable futures. Based on a perspective of conflict as productive, and a “conflict transformation” approach that can address the root issues of ecological conflicts and promote the emergence of alternatives, we lay out a conceptual framework for understanding transformations through a power analysis that aims to confront and subvert hegemonic power relations; that is, multi-dimensional and intersectional; balancing ecological concerns with social, economic, cultural and democratic spheres; and is multi-scalar, and mindful of impacts across place and space. Such a framework can help analyze and recognize the contribution of grassroots EJ movements to societal transformations to sustainability and support and aid radical transformation processes. While transitions literature tends to focus on artifacts and technologies, we suggest that a resistance-centred perspective focuses on the creation of new subjectivities, power relations, values and institutions. This recenters the agency of those who are engaged in the creation and recuperation of ecological and new ways of being in the world in the needed transformation

Towards an operationalization of test-driven development skills: An industrial empirical study

Abstract Context: The majority of the empirical studies on Test-driven development (TDD) are concerned with verifying or refuting the effectiveness of the technique over a traditional approach, and they tend to neglect whether the subjects possess the necessary skills to apply TDD, though they argue such skills are necessary. Objective: We evaluate a set of minimal, a priori and in process skills necessary to apply TDD. We determine whether variations in external quality (i.e., number of defects) and productivity (i.e., number of features implemented) can be associated with different clusters of the TDD skills? set. Method: We executed a quasi-experiment involving 30 practitioners from industry. We first grouped the participants according to their TDD skills? set (consisting of a priori experience on programming and testing as well as in-process TDD conformance) into three levels (Low-Medium-High) using k-means clustering. We then applied ANOVA to compare the clusters in terms of external quality and productivity, and conducted post-hoc pairwise analysis. Results: We did not observe a statistically significant difference between the clusters either for external software quality ( F ( 2 , 27 = 1.44 , p = . 260 ), or productivity ( F ( 2 , 27 ) = 3.02 , p = . 065 ). However, the analysis of the effect sizes and their confidence intervals shows that the TDD skills? set is a factor that could account for up to 28% of the external quality, and 38% for productivity. Conclusion: We have reason to conclude that focusing on the improvement of TDD skills? set investigated in this study could benefit software developers in improving their baseline productivity and the external quality of the code they produce. However, replications are needed to overcome the issues related with the statistical power of this study. We suggest practical insights for future work to investigate the phenomenon further.hisresearchispartiallysupportedbytheAcademyofFinlandwithdecisionno.:278354,andbyFinnishDistinguishedProfessor(Fi.Di.Pro.) programme, ESEIL

Analysis of natural radioactivity in Yatağan coal – fired power plant in Turkey

Use of the coal in order to generate electricity increases the exposure of people to radiation. In this paper, the activity concentrations of nuclides 226Ra, 232Th and 40K in samples of coal and bottom ash from the Yatagan Coal–Fired thermal power plant determined using gamma ray spectrometer with a NaI(Tl) scintillation detector. The mean activity concentrations of 226Ra, 232Th, and 40K in the coal were found to be 37.2±2.8 Bqkg-1, 51.8±3.4 Bqkg-1 and 166.7±11.1 Bqkg-1, respectively. Whereas in the bottom ashes, the concentrations of the corresponding radionuclides were found to be 62.2±5.6 Bqkg-1, 87.4±5.9 Bqkg-1 and 221.0 ±12.5 Bqkg-1, respectively. The findings show that bottom ashes show higher activity concentrations of related radionuclide to coal samples. The absorbed gamma dose rate in outdoor air DROUT and annual effective dose rate (AED) from coal were calculated to define radıologıcal rısk. The average findings of annual effective doses were detected as 68.6±5.1 μSvy-1 and 110.3±11.2 μSvy-1, respectively

An industry experiment on the effects of test-driven development on external quality and productivity

Existing empirical studies on test-driven development (TDD) report different conclusions about its effects on quality and productivity. Very few of those studies are experiments conducted with software professionals in industry. We aim to analyse the effects of TDD on the external quality of the work done and the productivity of developers in an industrial setting. We conducted an experiment with 24 professionals from three different sites of a software organization. We chose a repeated-measures design, and asked subjects to implement TDD and incremental test last development (ITLD) in two simple tasks and a realistic application close to real-life complexity. To analyse our findings, we applied a repeated-measures general linear model procedure and a linear mixed effects procedure. We did not observe a statistical difference between the quality of the work done by subjects in both treatments. We observed that the subjects are more productive when they implement TDD on a simple task compared to ITLD, but the productivity drops significantly when applying TDD to a complex brownfield task. So, the task complexity significantly obscured the effect of TDD. Further evidence is necessary to conclude whether TDD is better or worse than ITLD in terms of external quality and productivity in an industrial setting. We found that experimental factors such as selection of tasks could dominate the findings in TDD studies.This research has been partly funded by Spanish Ministry of Science and Innovation projects TIN2011-23216, the Distinguished Professor Program of Tekes, and the Academy of Finland (Grant Decision No. 260871)

Impact of antimicrobial drug restrictions on doctors' behaviors

Background/aim: Broad-spectrum antibiotics have become available for use only with the approval of infectious disease specialists (IDSs) since 2003 in Turkey. This study aimed to analyze the tendencies of doctors who are not disease specialists (non-IDSs) towards the restriction of antibiotics.Materials and methods: A questionnaire form was prepared, which included a total of 22 questions about the impact of antibiotic restriction (AR) policy, the role of IDSs in the restriction, and the perception of this change in antibiotic consumption. The questionnaire was completed by each participating physician.Results: A total of 1906 specialists from 20 cities in Turkey participated in the study. Of those who participated, 1271 (67.5%) had 5 years of occupational experience in their branch expressed that they followed the antibiotic guidelines more strictly than the JSs (P < 0.05) and 755 of physicians (88%) and 720 of surgeons (84.6%) thought that the AR policy was necessary and useful (P < 0.05).Conclusion: This study indicated that the AR policy was supported by most of the specialists. Physicians supported this restriction policy more so than surgeons did

Giant Intra-Articular Extrasynovial Osteochondroma of the Knee: A Report of Two Cases

We report two cases of a giant extrasynovial osteochondroma of the knee located in the infrapatellar fat pad region, in two females who were 58 and 71 years old respectively. Both patients had noticed the mass many years before our first clinical observation. In both patients, at physical examination a solid, firm and hard mass was palpable in the anterior part of the knee in Hoffa’s fat pad region, and the range of motion of the knee was severely restricted and painful. CT scan examination with 3D-reconstruction showed two large, calcified neoformations behind the patellar tendon, between the apex of the patella and the proximal third of the tibia. In both cases, the mass was completely resected surgically through an anterior longitudinal approach. At histological examination, the excised masses consisted of an outer layer of hyaline cartilage without significant chondrocyte atypia and an inner region of bone trabeculae formed by endochondral ossification. At follow-up, 8 and 4 years after the operation, both patients were pain-free, with complete recovery of the range of motion of the knee and without any clinical or radiographic evidence of recurrence. The authors believe that intra-articular extrasynovial osteochondroma of the knee is a primary metaplasia of Hoffa’s fat pad. Usually, the tumor develops slowly and asymptomatically over many years. The treatment of choice is a marginal resection of the mass, although a biopsy should be considered in some cases. Recurrences are extremely rare