Semisolid processing characteristics of AM series Mg alloys by rheo-diecasting

The official published version of this Article can be found at the link below - Copyright @ 2006 ASM InternationalAn investigation has been made into the solidification behavior and microstructural evolution of AM50, AM70, and AM90 alloys during rheo-diecasting, their processibility, and the resulting mechanical properties. It was found that solidification of AM series alloys under intensive melt shearing in the unique twin-screw slurry maker during rheo-diecasting gave rise to numerous spheroidal primary magnesium (Mg) particles that were uniformly present in the microstructure. As a result, the network of the beta-Mg17Al12 phase was consistently interrupted by these spheroidal and ductile particles. Such a microstructure reduced the obstacle of deformation and the harmfulness of the beta-Mg17Al12 network on ductility, and therefore improved the ductility of rheo-diecast AM alloys. It was shown that, even with 9 wt pct Al, the elongation of rheo-diecast AM90 still achieved (9 +/- 1.2) pct. Rheodiecasting thus provides an attractive processing route for upgrading the alloy specification of AM series alloys by increasing the aluminum (Al) content while ensuring ductility. Assessment of the processibility of AM series alloys for semisolid processing showed that high Al content AM series alloys are more suitable for rheo-diecasting than low Al content alloys, because of the lower sensitivity of solid fraction to temperature, the lower liquidus temperature, and the smaller interval between the semisolid processing temperature and the complete solidification temperature.This work is supported by the EPSR

MesonNet Workshop on Meson Transition Form Factors

The mini-proceedings of the Workshop on Meson Transition Form Factors held in Cracow from May 29th to 30th, 2012 introduce the meson transition form factor project with special emphasis on the interrelations between the various form factors (on-shell, single off-shell, double off-shell). Short summaries of the talks presented at the workshop follow.Comment: 69 pages, 14 figures; all talks can be found at https://sites.google.com/site/mesonnetwork/home/activities/form-factor-workshop-2012; v2: workshop link updated (as the page had to be moved to a commercial server), table 6 correcte

Myxococcus xanthus gliding motors are elastically coupled to the substrate as predicted by the focal adhesion model of gliding motility

Myxococcus xanthus is a model organism for studying bacterial social behaviors due to its ability to form complex multi-cellular structures. Knowledge of M. xanthus surface gliding motility and the mechanisms that coordinate it are critically important to our understanding of collective cell behaviors. Although the mechanism of gliding motility is still under investigation, recent experiments suggest that there are two possible mechanisms underlying force production for cell motility: the focal adhesion mechanism and the helical rotor mechanism which differ in the biophysics of the cell-substrate interactions. Whereas the focal adhesion model predicts an elastic coupling, the helical rotor model predicts a viscous coupling. Using a combination of computational modeling, imaging, and force microscopy, we find evidence for elastic coupling in support of the focal adhesion model. Using a biophysical model of the M. xanthus cell, we investigated how the mechanical interactions between cells are affected by interactions with the substrate. Comparison of modeling results with experimental data for cell-cell collision events pointed to a strong, elastic attachment between the cell and substrate. These results are robust to variations in the mechanical and geometrical parameters of the model. We then directly measured the motor-substrate coupling by monitoring the motion of optically trapped beads and find that motor velocity decreases exponentially with opposing load. At high loads, motor velocity approaches zero velocity asymptotically and motors remain bound to beads indicating a strong, elastic attachment

Continuous twin screw rheo-extrusion of an AZ91D magnesium alloy

© The Minerals, Metals & Materials Society and ASM International 2012The twin screw rheo-extrusion (TSRE) is designed to take advantage of the nondendritc microstructure and thixotropic characterization of semisolid-metal slurries and produce simple metal profiles directly from melts. The extrusion equipment consists of a rotor-stator high shear slurry maker, a twin screw extruder, and a die assembly. The process is continuous and has a potential for significantly saving energy, manufacturing cost, and enhancing efficiency. The present investigation was carried out to study the process performance for processing rods of an AZ91D magnesium alloy and the microstructure evolution during processing. The semisolid slurry prepared by the process was characterized by uniformly distributed nondendritic granular primary phase particles. AZ91D rods with uniform and fine microstructures and moderate mechanical properties were produced. For the given slurry making parameters, decreasing extrusion temperature was found to improve microstructures and properties. The mechanisms of particle granulation and refinement and the effect of processing parameters on process performance and thermal management are discussed. © 2012 The Minerals, Metals & Materials Society and ASM International.EPSRC (UK) and Rautomead Lt

Migraine-Asthma Comorbidity and Risk of Hypertensive Disorders of Pregnancy

Background: To evaluate the association of migraine and asthma and to estimate the risk of hypertensive disorders of pregnancy in relation to maternal comorbid migraine and asthma. Methods: Reproductive age women (N = 3.731) were interviewed during early pregnancy. At the time of interview, we ascertained participants' migraine and asthma status. From medical records, we collected information to allow the diagnosis of pregnancy-induced hypertension (PIH) and preeclampsia. Odds ratios (ORs) and 95% confidence intervals (CIs) were estimated using logistic regression procedures. Results: After adjusting for confounders, migraineurs had 1.38-fold increased odds of asthma as compared with nonmigraineurs (95% CI 1.09–1.38). The odds of hypertensive disorders of pregnancy were highest among women with comorbid migraine-asthma. The ORs for PIH preeclampsia and the two disorders combined were 2.53 (95% CI 1.39–4.61), 3.53 (95% CI 1.51–8.24), and 2.64 (95% CI 1.56–4.47), respectively, for women with comorbid migraine-asthma as compared with those who had neither disorder. Conclusion: These findings confirm prior reports and extend the literature by documenting particularly high odds of pregnancy-induced hypertension and preeclampsia among women with comorbid migraine-asthma. Increased knowledge about the prevalence and sequelae of comorbidities during pregnancy may lead to improved symptom management and perinatal outcomes

Kaon physics with the KLOE detector

In this paper we discuss the recent finalized analyses by the KLOE experiment at DA$\Phi$NE: the CPT and Lorentz invariance test with entangled $K^0 \bar{K}^0$ pairs, and the precision measurement of the branching fraction of the decay ${ K^+} \rightarrow \pi^+\pi^-\pi^+(\gamma)$. We also present the status of an ongoing analysis aiming to precisely measure the $K^{\pm}$ mass

Search for the 3He-eta bound state at COSY-11

We have measured excitation function for dp -> ppp_pi- reaction near the eta production threshold. We observe an enhancement of the counting rate above the threshold which can originate from the production of the eta meson in the reaction dp -> 3He eta and its subsequent absorption on neutron in the 3He nucleus leading to creation of the p_pi- pair.Comment: Presented at 10th International Workshop on Meson Production, Properties and Interaction (MESON 2008), Cracow, Poland, 6 - 10 June 2008, 4 pages, 4 figures,references adde

Novel method for hit-position reconstruction using voltage signals in plastic scintillators and its application to Positron Emission Tomography

Currently inorganic scintillator detectors are used in all commercial Time of Flight Positron Emission Tomograph (TOF-PET) devices. The J-PET collaboration investigates a possibility of construction of a PET scanner from plastic scintillators which would allow for single bed imaging of the whole human body. This paper describes a novel method of hit-position reconstruction based on sampled signals and an example of an application of the method for a single module with a 30 cm long plastic strip, read out on both ends by Hamamatsu R4998 photomultipliers. The sampling scheme to generate a vector with samples of a PET event waveform with respect to four user-defined amplitudes is introduced. The experimental setup provides irradiation of a chosen position in the plastic scintillator strip with an annihilation gamma quanta of energy 511~keV. The statistical test for a multivariate normal (MVN) distribution of measured vectors at a given position is developed, and it is shown that signals sampled at four thresholds in a voltage domain are approximately normally distributed variables. With the presented method of a vector analysis made out of waveform samples acquired with four thresholds, we obtain a spatial resolution of about 1 cm and a timing resolution of about 80 p