49 research outputs found
Microwave assisted heterogeneous catalysis: effects of varying oxygen concentrations on the oxidative coupling of methane
The oxidative coupling of methane was investigated over alumina supported La2O3/CeO2 catalysts under microwave dielectric heating conditions at different oxygen concentrations. It was observed that, at a given temperature using microwave heating, selectivities for both ethane and ethylene were notably higher when oxygen was absent than that in oxygen/methane mixtures. The differences were attributed to the localised heating of microwave radiation resulting in temperature inhomogeneity in the catalyst bed. A simplified model was used to estimate the temperature inhomogeneity; the temperature at the centre of the catalyst bed was 85 °C greater than that at the periphery when the catalyst was heated by microwaves in a gas mixture with an oxygen concentration of 12.5% (v/v), and the temperature difference was estimated to be 168 °C in the absence of oxygen
Application of microemulsion method for development of methanol steam reforming Pd/ZnO catalysts
Estimation of Average Crystallites Size of Active Phase in Ceria-Supported Cobalt-Based Catalysts by Hydrogen Chemisorption vs TEM and XRD Methods
Oxidative coupling of methane to ethylene in a reaction system with products separation and gas recirculation
Catalysts for the utilization of methane from the coal mine ventilation air
The paper indicates coal mines as the source of permanent emission of low-concentrated gases, which have increased the greenhouse effect. This paper proposes the catalytic oxidation of methane as the solution to the problem of methane utilization when its concentration in the air is insufficient for flame combustion. The studies which have been conducted for many years enabled finding the active oxide and metallic catalytic systems for the reaction of methane oxidation. For the utilization of gases with low-concentrated methane, using the low-temperature catalysts, especially palladium catalysts, seems to he economically well-justified. Depending on technological solutions it can be considered as the method for methane utilization or as an environmentally friendly way for the generation of electric and thermal energy
