Imbibition in mesoporous silica: rheological concepts and experiments on water and a liquid crystal

We present, along with some fundamental concepts regarding imbibition of liquids in porous hosts, an experimental, gravimetric study on the capillarity-driven invasion dynamics of water and of the rod-like liquid crystal octyloxycyanobiphenyl (8OCB) in networks of pores a few nanometers across in monolithic silica glass (Vycor). We observe, in agreement with theoretical predictions, square root of time invasion dynamics and a sticky velocity boundary condition for both liquids investigated. Temperature-dependent spontaneous imbibition experiments on 8OCB reveal the existence of a paranematic phase due to the molecular alignment induced by the pore walls even at temperatures well beyond the clearing point. The ever present velocity gradient in the pores is likely to further enhance this ordering phenomenon and prevent any layering in molecular stacks, eventually resulting in a suppression of the smectic phase in favor of the nematic phase.Comment: 18 pages, 8 figure

Electromagnetic Mass and Efficiency of Magnetic Gears for Electrified Aircraft

Magnetic gears are currently being developed for use in a variety of industries such as wind and automotive, because of their higher reliability and lower maintenance cost than their mechanical counterparts. The bulk of magnetic gear development to date has focused on maximizing the technology's volumetric torque density. In contrast, the primary performance metrics for an aircraft's gear box are its mass and efficiency. To that end this paper presents a study of the achievable electromagnetic specific torque and efficiency of concentric magnetic gears. NASA's second magnetic gear prototype is used as the baseline for this study. Achievable electromagnetic specific torque and efficiency trends are presented with respect to higher level design variables such as gear ratio and radius

Adaptives Grundwassermanagement in urbanen Gebieten: Einfluss der Oberflächengewässer-Grundwasser-Interaktion am Beispiel künstlicher Grundwasseranreicherung sowie variabler In-/Exfiltration der Birs (Schweiz)

Zusammenfassung: Der Nutzungsdruck auf Grundwasserressourcen in intensiv genutzten Flussebenen wird zunehmend größer. Ziel dieses Beitrages ist, anhand eines repräsentativen, instationären Datensatzes eines urbanen Grundwassersystems (Unteres Birstal CH) aufzuzeigen, wie mit Ansätzen des adaptiven Grundwassermanagements die Voraussetzungen für die nachhaltige Nutzung von Grundwasserressourcen geschaffen werden können. Mithilfe eines instationären Grundwassermodells können spezifische Fragen der Fluss-Grundwasser-Interaktion und dem Betrieb künstlicher Grundwasseranreicherung beantwortet werden. Die Instationarität der Fluss-Grundwasser-Interaktion und eine damit zusammenhängende Änderung von In - und Exfiltrationsverhältnissen konnte für verschiedene Flussabschnitte ermittelt werden. Die Datenauswertung eines Jahrhunderthochwassers trug wesentlich zum Verständnis dieser Prozesse bei. Durch ein Experiment mit der längerfristigen Außerbetriebnahme einer künstlichen Grundwasseranreicherung im Untersuchungsgebiet konnten die Auswirkungen von geplanten Nutzungsänderungen abgeschätzt werden. Die Untersuchungen tragen zum Prozessverständnis des Grundwassersystems bei und liefern die Grundlage für eine Diskussion über lang-, mittel- und kurzfristige Ziele hinsichtlich der regionalen Bewirtschaftung urbaner Wasserressource

Dynamic Testing of a High-Specific-Torque Concentric Magnetic Gear

This paper presents initial measurements of the efficiency of NASA's 2nd magnetic gear prototype. A detailed discussion of the test rig's design and capabilities was presented, along with a thorough uncertainty analysis. The reported uncertainties are 95% confidence intervals that include the effects of temperature and parasitic loads. The prototype's response was measured at output speeds between 124 rpm and 744 rpm for a controlled output torque of 10 Nm (8% of the prototype's maximum torque). After correcting for tare losses, the prototype's efficiency was found to decrease from 90.0% to 83.0% as speed increased. If the efficiency is extrapolated to a typical operating condition (85% of maximum torque) using the good assumption that energy loss is approximately independent of the transmitted torque, the expected efficiency would be 99.0% to 98.4%, which exceeds the state of the art for these speeds

Optical absorption of non-interacting tight-binding electrons in a Peierls-distorted chain at half band-filling

In this first of three articles on the optical absorption of electrons in half-filled Peierls-distorted chains we present analytical results for non-interacting tight-binding electrons. We carefully derive explicit expressions for the current operator, the dipole transition matrix elements, and the optical absorption for electrons with a cosine dispersion relation of band width $W$ and dimerization parameter $\delta$. New correction (``$\eta$''-)terms to the current operator are identified. A broad band-to-band transition is found in the frequency range $W\delta < \omega < W$ whose shape is determined by the joint density of states for the upper and lower Peierls subbands and the strong momentum dependence of the transition matrix elements.Comment: 17 pages REVTEX 3.0, 2 postscript figures; hardcopy versions before May 96 are obsolete; accepted for publication in The Philosophical Magazine

Lessons Learned in Fabrication of a High-Specific-Torque Concentric Magnetic Gear

Magnetic gearing is being investigated at NASA as a replacement to conventional mechanical gearing in aerospace applications. Some key benefits of magnetic gears over mechanical gearing are torque transmission without mechanical contact, decreased transmission noise, less frequent maintenance, and lack of lubrication. In order to take advantage of these benefits in aerospace applications, magnetic gearing must be shown to provide high enough specific torque (torque per unit mass). Prototype 2 (PT-2), developed to maximize specific torque, and fabricated at NASA Glenn Research Center, has shown promising specific torque comparable to low torque mechanical gears. This work will briefly review the electromagnetic and structural design of PT-2, provide detailed information on fabrication and assembly, examine build errors, walk through rebuild efforts to improve operation, and conclude with remarks on build difficulties and opportunities for improvement in future prototypes

Exact results for the optical absorption of strongly correlated electrons in a half-filled Peierls-distorted chain

In this second of three articles on the optical absorption of electrons in a half-filled Peierls-distorted chain we present exact results for strongly correlated tight-binding electrons. In the limit of a strong on-site interaction $U$ we map the Hubbard model onto the Harris-Lange model which can be solved exactly in one dimension in terms of spinless fermions for the charge excitations. The exact solution allows for an interpretation of the charge dynamics in terms of parallel Hubbard bands with a free-electron dispersion of band-width $W$, separated by the Hubbard interaction $U$. The spin degrees of freedom enter the expressions for the optical absorption only via a momentum dependent but static ground state expectation value. The remaining spin problem can be traced out exactly since the eigenstates of the Harris-Lange model are spin-degenerate. This corresponds to the Hubbard model at temperatures large compared to the spin exchange energy. Explicit results are given for the optical absorption in the presence of a lattice distortion $\delta$ and a nearest-neighbor interaction $V$. We find that the optical absorption for $V=0$ is dominated by a peak at $\omega=U$ and broad but weak absorption bands for $| \omega -U | \leq W$. For an appreciable nearest-neighbor interaction, $V>W/2$, almost all spectral weight is transferred to Simpson's exciton band which is eventually Peierls-split.Comment: 50 pages REVTEX 3.0, 6 postscript figures; hardcopy versions before May 96 are obsolete; accepted for publication in The Philosophical Magazine

Non-monotonic temperature evolution of dynamic correlations in glass-forming liquids

The viscosity of glass-forming liquids increases by many orders of magnitude if their temperature is lowered by a mere factor of 2-3 [1,2]. Recent studies suggest that this widespread phenomenon is accompanied by spatially heterogeneous dynamics [3,4], and a growing dynamic correlation length quantifying the extent of correlated particle motion [5-7]. Here we use a novel numerical method to detect and quantify spatial correlations which reveal a surprising non-monotonic temperature evolution of spatial dynamical correlations, accompanied by a second length scale that grows monotonically and has a very different nature. Our results directly unveil a dramatic qualitative change in atomic motions near the mode-coupling crossover temperature [8] which involves no fitting or indirect theoretical interpretation. Our results impose severe new constraints on the theoretical description of the glass transition, and open several research perspectives, in particular for experiments, to confirm and quantify our observations in real materials.Comment: 7 page

Theory of Electric Field-Induced Photoluminescence Quenching in Disordered Molecular Solids

The dynamics of excitons in disordered molecular solids is studied theoretically, taking into account migration between different sites, recombination, and dissociation into free charge carriers in the presence of an electric field. The theory is applied to interpret the results of electric field-induced photoluminescence (PL) quenching experiments on molecularly doped polymers by Deussen et al. [Chem. Phys. 207, 147 (1996)]. Using an intermolecular dissociation mechanism, the dependence of the PL quenching on the electric field strength and the dopant concentration, and the time evolution of the transient PL quenching can be well described. The results constitute additional proof of the distinct exciton dissociation mechanisms in conjugated polymer blends and molecularly doped polymers.Comment: 4 pages RevTeX, 3 Postscript figure

Morphology of supported polymer electrolyte ultra-thin films: a numerical study

Morphology of polymer electrolytes membranes (PEM), e.g., Nafion, inside PEM fuel cell catalyst layers has significant impact on the electrochemical activity and transport phenomena that determine cell performance. In those regions, Nafion can be found as an ultra-thin film, coating the catalyst and the catalyst support surfaces. The impact of the hydrophilic/hydrophobic character of these surfaces on the structural formation of the films has not been sufficiently explored yet. Here, we report about Molecular Dynamics simulation investigation of the substrate effects on the ionomer ultra-thin film morphology at different hydration levels. We use a mean-field-like model we introduced in previous publications for the interaction of the hydrated Nafion ionomer with a substrate, characterized by a tunable degree of hydrophilicity. We show that the affinity of the substrate with water plays a crucial role in the molecular rearrangement of the ionomer film, resulting in completely different morphologies. Detailed structural description in different regions of the film shows evidences of strongly heterogeneous behavior. A qualitative discussion of the implications of our observations on the PEMFC catalyst layer performance is finally proposed