Long-Term High-Temperature Stability of Functionalized Graphene Oxide Nanoplatelets in Arab-D and API Brine

Partially reduced graphene oxide (prGO) was covalently functionalized with a zwitterionic polymer polyzwitterionic polymer to afford a composite material with excellent dispersibility and long-term stability in high salinity brines including standard API and Arab-D found in deep oil reservoirs. When heated at 90 °C, the dispersions remained stable in excess of 140 days. These results suggest the utility of imidazolium-based polymers for brine stabilization as well as the use of diazonium containing polymers for a “grafting-to” approach to nanocarbon functionalization.Saudi Aramco (MIT Energy Initiative)Massachusetts Institute of Technology. Institute for Soldier NanotechnologiesCamille & Henry Dreyfus Foundation. Postdoctoral Program in Environmental Chemistry (Fellowship

Observation of strongly forbidden solid effect dynamic nuclear polarization transitions via electron-electron double resonance detected NMR

We present electron paramagnetic resonance experiments for which solid effect dynamic nuclear polarization transitions were observed indirectly via polarization loss on the electron. This use of indirect observation allows characterization of the dynamic nuclear polarization (DNP) process close to the electron. Frequency profiles of the electron-detected solid effect obtained using trityl radical showed intense saturation of the electron at the usual solid effect condition, which involves a single electron and nucleus. However, higher order solid effect transitions involving two, three, or four nuclei were also observed with surprising intensity, although these transitions did not lead to bulk nuclear polarization—suggesting that higher order transitions are important primarily in the transfer of polarization to nuclei nearby the electron. Similar results were obtained for the SA-BDPA radical where strong electron-nuclear couplings produced splittings in the spectrum of the indirectly observed solid effect conditions. Observation of high order solid effect transitions supports recent studies of the solid effect, and suggests that a multi-spin solid effect mechanism may play a major role in polarization transfer via DNP.National Institutes of Health (U.S.) (Grant EB002804)National Institutes of Health (U.S.) (Grant EB002026)National Institutes of Health (U.S.) (Grant GM095843)Deutsche Forschungsgemeinschaft (Research Fellowship CO 802/1-1

The effect of mixing methods on the dispersion of carbon nanotubes during the solvent-free processing of multiwalled carbon nanotube/epoxy composites

The article of record as published may be found at: http://dx.doi.org/10.1002/polb.23225Several solvent-free processing methods to disperse multiwalled carbon nanotubes (MWCNTs) in bisphenol F-based epoxy resin were investigated, including the use of a microfluidizer (MF), planetary shear mixer (PSM), ultrasonication (US) and combinations. The processed mixture was cured with diethyl toluene diamine. Three complimentary techniques were used to characterize the dispersion of the MWCNTs in cured composite samples: optical microscopy, micro Raman spectroscopy, and scanning electron microscopy (SEM). For sample MF þ PSM, optical micrographs and Raman images showed reduced agglomeration and a homogeneous distribution of MWCNTs in the epoxy matrix. SEM analysis of fractured specimen after tensile testing revealed breakage of nanotubes along the fracture surface of the composite. A comparison of the MWCNT dispersion in the epoxy samples processed using different methods showed that a combination of MF and PSM processing yields a more homogeneous sample than the PSM or US þ PSM processed samples. Mechanical testing of the composites showed about 15% improvement in the tensile strength of samples processed by the MF þ PSM method over other methods. Thermogravimetric analysis (TGA) results showed a small decrease in the onset degradation temperature for poorly dispersed samples produced by PSM compared with the well-mixed samples (MF þ PSM). These results strongly suggest that the MF þ PSM processing method yield better-dispersed and stronger MWCNT/epoxy composites

Red Phosphorescence from Benzo[2,1,3]thiadiazoles at Room Temperature

We describe the red phosphorescence exhibited by a class of structurally simple benzo[2,1,3]thiadiazoles at room temperature. The photophysical properties of these molecules in deoxygenated cyclohexane, including their absorption spectra, steady-state photoluminescence and excitation spectra, and phosphorescence lifetimes, are presented. Time-dependent density functional theory calculations were carried out to better understand the electronic excited states of these benzo[2,1,3]thiadiazoles and why they are capable of phosphorescence.National Science Foundation (U.S.) (1122374)United States. Dept. of Energy. Office of Basic Energy Sciences (DE-FG02-07ER46474

Shorter Exciton Lifetimes via an External Heavy-Atom Effect: Alleviating the Effects of Bimolecular Processes in Organic Light-Emitting Diodes

Multiexcited‐state phenomena are believed to be the root cause of two exigent challenges in organic light‐emitting diodes; namely, efficiency roll‐off and degradation. The development of novel strategies to reduce exciton densities under heavy load is therefore highly desirable. Here, it is shown that triplet exciton lifetimes of thermally activated delayed‐fluorescence‐emitter molecules can be manipulated in the solid state by exploiting intermolecular interactions. The external heavy‐atom effect of brominated host molecules leads to increased spin–orbit coupling, which in turn enhances intersystem crossing rates in the guest molecule. Wave function overlap between the host and the guest is confirmed by combined molecular dynamics and density functional theory calculations. Shorter triplet exciton lifetimes are observed, while high photoluminescence quantum yields and essentially unaltered emission spectra are maintained. A change in the intersystem crossing rate ratio due to increased dielectric constants leads to almost 50% lower triplet exciton densities in the emissive layer in the steady state and results in an improved onset of the photoluminescence quantum yield roll‐off at high excitation densities. Efficient organic light‐emitting diodes with better roll‐off behavior based on these novel hosts are fabricated, demonstrating the suitability of this concept for real‐world applications.United States. Department of Energy (Grant DE‐FG02‐07ER46474

Thermally Activated Delayed Fluorescence Materials Based on Homoconjugation Effect of Donor–Acceptor Triptycenes

Donor–acceptor triptycences, TPA-QNX(CN)2 and TPA-PRZ(CN)2, were synthesized and their emissive properties were studied. They exhibited a blue-green fluorescence with emission lifetimes on the order of a microsecond in cyclohexane at room temperature. The long lifetime emission is quenched by O[subscript 2] and is attributed to thermally activated delayed florescence (TADF). Unimolecular TADF is made possible by the separation and weak coupling due to homoconjugation of the HOMO and LUMO on different arms of the three-dimensional donor–acceptor triptycene. Organic light emitting devices (OLEDs) were fabricated using TPA-QNX(CN)2 and TPA-PRZ(CN)2 as emitters which displayed electroluminescence with efficiencies as high as 9.4% EQE.Samsung (Firm)Japan Society for the Promotion of Scienc

Development and Screening of Contrast Agents for In Vivo Imaging of Parkinson’s Disease

Purpose: The goal was to identify molecular imaging probes that would enter the brain, selectively bind to Parkinson’s disease (PD) pathology, and be detectable with one or more imaging modalities. Procedure: A library of organic compounds was screened for the ability to bind hallmark pathology in human Parkinson’s and Alzheimer’s disease tissue, alpha-synuclein oligomers and inclusions in two cell culture models, and alpha-synuclein aggregates in cortical neurons of a transgenic mouse model. Finally, compounds were tested for blood–brain barrier permeability using intravital microscopy. Results: Several lead compounds were identified that bound the human PD pathology, and some showed selectivity over Alzheimer’s pathology. The cell culture models and transgenic mouse models that exhibit alpha-synuclein aggregation did not prove predictive for ligand binding. The compounds had favorable physicochemical properties, and several were brain permeable. Conclusions: Future experiments will focus on more extensive evaluation of the lead compounds as PET ligands for clinical imaging of PD pathology

Functionalized Poly(3-hexylthiophene)s via Lithium–Bromine Exchange

Poly(3-hexylthiophene) (P3HT) is one of the most extensively investigated conjugated polymers and has been employed as the active material in many devices including field-effect transistors, organic photovoltaics and sensors. As a result, methods to further tune the properties of P3HT are desirable for specific applications. Herein, we report a facile postpolymerization modification strategy to functionalize the 4-position of commercially available P3HT in two simple steps–bromination of the 4-position of P3HT (Br–P3HT) followed by lithium−bromine exchange and quenching with an electrophile. We achieved near quantitative lithium–bromine exchange with Br–P3HT, which requires over 100 thienyl lithiates to be present on a single polymer chain. The lithiated-P3HT is readily combined with functional electrophiles, resulting in P3HT derivatives with ketones, secondary alcohols, trimethylsilyl (TMS) group, fluorine, or an azide at the 4-position. We demonstrated that the azide-modified P3HT could undergo Cu-catalyzed or Cu-free click chemistry, significantly expanding the complexity of the structures that can be appended to P3HT using this method.National Science Foundation (U.S.) (ECCS-0939514

Fluorofluorophores: Fluorescent Fluorous Chemical Tools Spanning the Visible Spectrum

“Fluoro” refers to both fluorescent and fluorinated compounds. Despite the shared prefix, there are very few fluorescent molecules that are soluble in perfluorinated solvents. This paucity is surprising, given that optical microscopy is a ubiquitous technique throughout the physical sciences and the orthogonality of fluorous materials is a commonly exploited strategy in synthetic chemistry, materials science, and chemical biology. We have addressed this shortage by synthesizing a panel of “fluorofluorophores,” fluorescent molecules containing high weight percent fluorine with optical properties spanning the visible spectrum. We demonstrate the utility of these fluorofluorophores by preparing fluorescent perfluorocarbon nanoemulsions.National Science Foundation (U.S.) (ECCS-0939514

Understanding Uncertainty

A way to assess the information decrease uncertainty and project risk was described. Incorporating the method into real-time evaluation programs allowed continual updating of prognoses, such as the distance to a drilling target. Three case studies showed uncertainty analysis for geosteering into a thin pay section, a shaly-sand petrophysical analysis and a walkaway vertical seismic profile (VSP)