Job Crafting and Identity in Low-Grade Work: How Hospital Porters Redefine the Value of their Work and Expertise

Over 25 years ago, Brown and Duguid (Organisation Science, 2(1), 40–57, 1991) highlighted the differences between the way organisations formally describe and delineate jobs and the actual practices of their employees. This paper combines ideas from their seminal contribution with theories of ‘job crafting’ and identity to examine the agentic behaviour of employees in low-grade, ‘dirty work’ as they utilise their expertise and practices to (re)frame their occupational identities and challenge their prescribed job boundaries. The evidence for the paper comes from a qualitative study of hospital porters in the UK’s National Health Service. It argues that this combined theoretical approach provides a potential research and employment framework to challenge the abstracted and stereotypical conceptions of the expertise related to low-grade jobs

Radio Pulse Properties of the Millisecond Pulsar PSR J0437-4715. I. Observations at 20cm

We present a total of 48 minutes of observations of the nearby, bright millisecond pulsar PSR J0437-4715 taken at the Parkes radio observatory in Australia. The data were obtained at a central radio frequency of 1380 MHz using a high-speed tape recorder that permitted coherent Nyquist sampling of 50 MHz of bandwidth in each of two polarizations. Using the high time resolution available from this voltage recording technique, we have studied a variety of single-pulse properties, most for the first time in a millisecond pulsar. We find no evidence for "diffractive" quantization effects in the individual pulse arrival times or amplitudes as have been reported for this pulsar at lower radio frequency using coarser time resolution (Ables et al. 1997). Overall, we find that the single pulse properties of PSR J0437-4715 are similar to those of the common slow-rotating pulsars, even though this pulsar's magnetosphere and surface magnetic field are several orders of magnitude smaller than those of the general population. The pulsar radio emission mechanism must therefore be insensitive to these fundamental neutron star properties.Comment: 24 Postscript pages, 11 eps figures. Accepted for publication in the Astrophysical Journal. Abbreviated abstract follow

Diabetes and tuberculosis: the impact of the diabetes epidemic on tuberculosis incidence.

BACKGROUND: Tuberculosis (TB) remains a major cause of mortality in developing countries, and in these countries diabetes prevalence is increasing rapidly. Diabetes increases the risk of TB. Our aim was to assess the potential impact of diabetes as a risk factor for incident pulmonary tuberculosis, using India as an example. METHODS: We constructed an epidemiological model using data on tuberculosis incidence, diabetes prevalence, population structure, and relative risk of tuberculosis associated with diabetes. We evaluated the contribution made by diabetes to both tuberculosis incidence, and to the difference between tuberculosis incidence in urban and rural areas. RESULTS: In India in 2000 there were an estimated 20.7 million adults with diabetes, and 900,000 incident adult cases of pulmonary tuberculosis. Our calculations suggest that diabetes accounts for 14.8% (uncertainty range 7.1% to 23.8%) of pulmonary tuberculosis and 20.2% (8.3% to 41.9%) of smear-positive (i.e. infectious) tuberculosis. We estimate that the increased diabetes prevalence in urban areas is associated with a 15.2% greater smear-positive tuberculosis incidence in urban than rural areas - over a fifth of the estimated total difference. CONCLUSION: Diabetes makes a substantial contribution to the burden of incident tuberculosis in India, and the association is particularly strong for the infectious form of tuberculosis. The current diabetes epidemic may lead to a resurgence of tuberculosis in endemic regions, especially in urban areas. This potentially carries a risk of global spread with serious implications for tuberculosis control and the achievement of the United Nations Millennium Development Goals

The challenges facing young women in apprenticeships

Participation in government-supported apprenticeship programs in the UK is characterized by stereotypical gender imbalances . This chapter draws on secondary data analysis of official statistics on young people?s participation in vocational education and training (VET) and apprenticeship, and evidence from a study of the attitudes of 14- and 15-year-olds in England and Wales to the labor market . The discussion reveals the deep-rooted nature and continuing influence of gendered stereotypes in relation to what men and women can and cannot do in the world of work. This chapter argues that while patterns of take-up in apprenticeship mirror unequal conditions in the labor market and society more widely, initiatives in some European countries indicate that there are steps that can be taken to help young women gain access to occupations that provide better prospects in terms of pay and career progression

Nanoscale intermittent contact-scanning electrochemical microscopy

A major theme in scanning electrochemical microscopy (SECM) is a methodology for nanoscale imaging with distance control and positional feedback of the tip. We report the expansion of intermittent contact (IC)-SECM to the nanoscale, using disk-type Pt nanoelectrodes prepared using the laser-puller sealing method. The Pt was exposed using a focused ion beam milling procedure to cut the end of the electrode to a well-defined glass sheath radius, which could also be used to reshape the tips to reduce the size of the glass sheath. This produced nanoelectrodes that were slightly recessed, which was optimal for IC-SECM on the nanoscale, as it served to protect the active part of the tip. A combination of finite element method simulations, steady-state voltammetry and scanning electron microscopy for the measurement of critical dimensions, was used to estimate Pt recession depth. With this knowledge, the tip-substrate alignment could be further estimated by tip approach curve measurements. IC-SECM has been implemented by using a piezo-bender actuator for the detection of damping of the oscillation amplitude of the tip, when IC occurs, which was used as a tip-position feedback mechanism. The piezo-bender actuator improves significantly on the performance of our previous setup for IC-SECM, as the force acting on the sample due to the tip is greatly reduced, allowing studies with more delicate tips. The capability of IC-SECM is illustrated with studies of a model electrode (metal/glass) substrate

Multi-Epoch Observations of Survey Sources

Five objects mapped as part of a VLBI survey have been re-observed at 5 GHz, and four of them have also been observed at 10 GHz. Three of the objects show no substantial structural variations: an upper limit of 2c can be placed on the apparent relative velocities of the components. One object (0711+356) shows structural variations which are mostly simply described in terms of a superluminal contraction. The remaining object (3C371, 1807+698) shows substantial structural variations which suggest that it probably is a superluminal source. The source 0710+439 is especially interesting as it consists of a central flat-spectrum core component straddled by two compact steep-spectrum components

Space VLBI Observations of 3C 279 at 1.6 and 5 GHz

We present the first VLBI Space Observatory Programme (VSOP) observations of the gamma-ray blazar 3C 279 at 1.6 and 5 GHz. The combination of the VSOP and VLBA-only images at these two frequencies maps the jet structure on scales from 1 to 100 mas. On small angular scales the structure is dominated by the quasar core and the bright secondary component `C4' located 3 milliarcseconds from the core (at this epoch). On larger angular scales the structure is dominated by a jet extending to the southwest, which at the largest scale seen in these images connects with the smallest scale structure seen in VLA images. We have exploited two of the main strengths of VSOP: the ability to obtain matched-resolution images to ground-based images at higher frequencies and the ability to measure high brightness temperatures. A spectral index map was made by combining the VSOP 1.6 GHz image with a matched-resolution VLBA-only image at 5 GHz from our VSOP observation on the following day. The spectral index map shows the core to have a highly inverted spectrum, with some areas having a spectral index approaching the limiting value for synchrotron self-absorbed radiation of 2.5. Gaussian model fits to the VSOP visibilities revealed high brightness temperatures (>10^{12} K) that are difficult to measure with ground-only arrays. An extensive error analysis was performed on the brightness temperature measurements. Most components did not have measurable brightness temperature upper limits, but lower limits were measured as high as 5x10^{12} K. This lower limit is significantly above both the nominal inverse Compton and equipartition brightness temperature limits. The derived Doppler factor, Lorentz factor, and angle to the line-of-sight in the case of the equipartition limit are at the upper end of the range of expected values for EGRET blazars.Comment: 11 pages, 6 figures, emulateapj.sty, To be published in The Astrophysical Journal, v537, Jul 1, 200

Photometric observations of selected, optically bright quasars for Space Interferometry Mission and other future celestial reference frames

Photometric observations of 235 extragalactic objects that are potential targets for the Space Interferometry Mission (SIM) are presented. Mean B, V, R, I magnitudes at the 5% level are obtained at 1 - 4 epochs between 2005 and 2007 using the 1-m telescopes at Cerro Tololo Inter-American Observatory and Naval Observatory Flagstaff Station. Of the 134 sources which have V magnitudes in the Veron & Veron-Cetty catalog a difference of over 1.0 mag is found for the observed-catalog magnitudes for about 36% of the common sources, and 10 sources show over 3 mag difference. Our first set of observations presented here form the basis of a long-term photometric variability study of the selected reference frame sources to assist in mission target selection and to support in general QSO multi-color photometric variability studies.Comment: 40 pages, 13 figures, 4 table

Characterization of nanopipettes

Nanopipettes are widely used in electrochemical and analytical techniques as tools for sizing, sequencing, sensing, delivery and imaging. For all of these applications, the response of a nanopipette is strongly affected by its geometry and surface chemistry. As the size of nanopipettes becomes smaller, precise geometric characterization is increasingly important, especially if nanopipette probes are to be used for quantitative studies and analysis. This contribution highlights the combination of data from voltage-scanning ion conductivity experiments, transmission electron microscopy (TEM) and finite element method (FEM) simulations to fully characterize nanopipette geometry and surface charge characteristics, with an accuracy not achievable using existing approaches. Indeed, it is shown that presently used methods for nanopipette characterization can lead to highly erroneous information on nanopipettes. The new approach to characterization further facilitates high-level quantification of the behavior of nanopipettes in electrochemical systems, as demonstrated herein for a scanning ion conductance microscope (SICM) setup