Improved BPSO for optimal PMU placement

Optimal phasor measurement unit (PMU) placement involves the process of minimizing the number of PMU needed while ensuring entire power system network completely observable. This paper presents the improved binary particle swarm (IBPSO) method that converges faster and also manage to maximize the measurement redundancy compared to the existing BPSO method. This method is applied to IEEE-30 bus system for the case of considering zero-injection bus and its effectiveness is verified by the simulation results done by using MATLAB software

Temperature effects on the electrical performance of large area multicrystalline silicon solar cells using the current shunt measuring technique

The temperature effects on the electrical performance of a large area multicrystalline silicon solar cell with back-contact technology have been studied in a desert area under ambient conditions using the current shunt measuring technique. Therefore, most of the problems encountered with traditional measuring techniques are avoided. The temperature dependency of the current shunt from 5ºC up to 50ºC has been investigated. Its temperature coefficient proves to be negligible which means that the temperature dependency of the solar cell is completely independent of the current shunt. The solar module installed in a tilted position at the optimum angle of the location, has been tested in two different seasons (winter and summer). The obtained solar cell short circuit current, open circuit voltage and output power are correlated with the measured incident radiation in both seasons and all results are discussed

An improved design of a fully automated multiple output micropotentiometer

This paper describes in details a new design of a fully automated multiple output micropotentiometer (?pot). A prototype has been built at the National Institute for Standards (NIS), Egypt to establish this highly improved AC voltage source in the millivolt range. The new device offers three different outputs covering a wide frequency range from only one outlet. This valuably supports the precise sourcing ranges of low AC voltage at NIS. The design and the operation theory of this prototype have been discussed in details. An automatic calibration technique has been introduced through specially designed software using the LabVIEW program to enhance the calibration technique and to reduce the uncertainty contributions. Relative small AC-DC differences of our prototype in the three output ranges are fairly verified. The expanded uncertainties of the calibration results for the three output ranges have been faithfully estimated. However, further work is needed to achieve the optimum performance of this new device

Electrical performance study of a large area multicrystalline silicon solar cell using a current shunt and a micropotentiometer

In this paper, a new technique using a Current Shunt and a Micropotentiometer has been used to study the electrical performance of a large area multicrystalline silicon solar cell at outdoor conditions. The electrical performance is mainly described by measuring both cell short circuit current and open circuit voltage. The measurements of this cell by using multimeters suffer from some problems because the cell has high current intensity with low output voltage. So, the solar cell short circuit current values are obtained by measuring the voltage developed across a known resistance Current Shunt. Samples of the obtained current values are accurately calibrated by using a Micropotentiometer (μpot) thermal element (TE) to validate this new measuring technique. Moreover, the solar cell open circuit voltage has been measured. Besides, the cell output power has been calculated and can be correlated with the measured incident radiation

Resolving the far-IR line deficit : photoelectric heating and far-IR line cooling in NGC 1097 and NGC 4559

The physical state of interstellar gas and dust is dependent on the processes which heat and cool this medium. To probe heating and cooling of the interstellar medium over a large range of infrared surface brightness, on sub-kiloparsec scales, we employ line maps of [C II] 158 mu m, [O I] 63 mu m, and [N II] 122 mu m in NGC 1097 and NGC 4559, obtained with the Photodetector Array Camera & Spectrometer on board Herschel. We matched new observations to existing Spitzer Infrared Spectrograph data that trace the total emission of polycyclic aromatic hydrocarbons (PAHs). We confirm at small scales in these galaxies that the canonical measure of photoelectric heating efficiency, ([C II] + [O I])/TIR, decreases as the far-infrared (far-IR) color, nu f(nu)(70 mu m) nu f(nu)(100 mu m), increases. In contrast, the ratio of far-IR cooling to total PAH emission, ([C II] + [O I])/PAH, is a near constant similar to 6% over a wide range of far-IR color, 0.5 , derived from models of the IR spectral energy distribution. Emission from regions that exhibit a line deficit is characterized by an intense radiation field, indicating that small grains are susceptible to ionization effects. We note that there is a shift in the 7.7/11.3 mu m PAH ratio in regions that exhibit a deficit in ([C II] + [O I])/PAH, suggesting that small grains are ionized in these environments

INOVASI KOMITE SEKOLAH DALAM MENGATASI TANTANGAN PENDIDIKAN DI ERA DIGITAL: STUDI KASUS DI BANGKALAN MADURA

This article discusses the innovations carried out by the School Committee at Madrasah Aliyah Nurul Iman in facing the challenges of education in the digital era. Education in the digital era faces significant challenges that require innovation and adaptation fromvarious stakeholders, including school committees. This research aims to identify and analyze innovations carried out by the School Committee at Madrasah Aliyah Nurul Iman, located in Labang District, Bangkalan Regency, East Java Province, in facing the challenges of education in the digital era. The method used in this research is a case study with a qualitative approach. Data was collected through in-depth interviews, observations and document analysis with participants consisting of school committee members, teachers, students and parents. The results of the research show that the School Committee at Madrasah Aliyah Nurul Iman has carried out various innovations to improve the quality of education. These innovations include the use of information technology in the learning process, increasing teacher capacity through training and workshops, as well as collaboration with various external parties such as universities and technology companies. The implementation of information technology includes the use of e-learning platforms, learning applications, and hardware such as computers and projectors, which make learning more interactive and accessible to students

On the residual opening of hydraulic fractures

Hydraulic stimulation technologies are widely applied across resource and power generation industries to increase the productivity of oil/gas or hot water reservoirs. These technologies utilise pressurised water, which is applied inside the well to initiate and drive fractures as well as to open a network of existing natural fractures. To prevent the opened fractures from complete closure during production stage, small particles (proppants) are normally injected with the pressurised fluid. These particles are subjected to confining stresses when the fluid pressure is removed, which leads to a partial closure of the stimulated fractures. The residual fracture openings are the main outcome of such hydraulic stimulations as these openings significantly affect the permeability of the reservoirs and, subsequently, the well productivity. Past research was largely focused on the assessment of conditions and characteristics of fluid driven fractures as well as proppant placement techniques. Surprisingly, not much work was devoted to the assessment of the residual fracture profiles. In this work we develop a simplified non-linear mathematical model of residual closure of a plane crack filled with deformable particles and subjected to a remote compressive stress. It is demonstrated that the closure profile is significantly influenced by the distribution and compressibility of the particles, which are often ignored in the current evaluations of well productivity. © 2013 Springer Science+Business Media Dordrecht.Luiz Bortolan Neto, Andrei Kotouso

The Financial Burden of Non-Communicable Chronic Diseases in Rural Nigeria: Wealth and Gender Heterogeneity in Health Care Utilization and Health Expenditures

Objectives Better insights into health care utilization and out-of-pocket expenditures for non-communicable chronic diseases (NCCD) are needed to develop accessible health care and limit the increasing financial burden of NCCDs in Sub-Saharan Africa. Methods A household survey was conducted in rural Kwara State, Nigeria, among 5,761 individuals. Data were obtained using biomedical and socio-economic questionnaires. Health care utilization, NCCD-related health expenditures and distances to health care providers were compared by sex and by wealth quintile, and a Heckman regression model was used to estimate health expenditures taking selection bias in health care utilization into account. Results The prevalence of NCCDs in our sample was 6.2%. NCCD-affected individuals from the wealthiest quintile utilized formal health care nearly twice as often as those from the lowest quintile (87.8% vs 46.2%, p = 0.002). Women reported foregone formal care more often than men (43.5% vs. 27.0%, p = 0.058). Health expenditures relative to annual consumption of the poorest quintile exceeded those of the highest quintile 2.2-fold, and the poorest quintile exhibited a higher rate of catastrophic health spending (10.8% among NCCD-affected households) than the three upper quintiles (4.2% to 6.7%). Long travel distances to the nearest provider, highest for the poorest quintile, were a significant deterrent to seeking care. Using distance to the nearest facility as instrument to account for selection into health care utilization, we estimated out-of-pocket health care expenditures for NCCDs to be significantly higher in the lowest wealth quintile compared to the three upper quintiles. Conclusions Facing potentially high health care costs and poor accessibility of health care facilities, many individuals suffering from NCCDs—particularly women and the poor—forego formal care, thereby increasing the risk of more severe illness in the future. When seeking care, the poor spend less on treatment than the rich, suggestive of lower quality care, while their expenditures represent a higher share of their annual household consumption. This calls for targeted interventions that enhance health care accessibility and provide financial protection from the consequences of NCCDs, especially for vulnerable populations

Locking bandwidth of two laterally coupled semiconductor lasers subject to optical injection

We report here for the first time (to our knowledge), a new and universal mechanism by which a two-element laser array is locked to external optical injection and admits stably injection-locked states within a nontrivial trapezoidal region. The rate equations for the system are studied both analytically and numerically. We derive a simple mathematical expression for the locking conditions, which reveals that two parallel saddle-node bifurcation branches, not reported for conventional single lasers subject to optical injection, delimit the injection locking range and its width. Important parameters are the linewidth enhancement factor, the laser separation, and the frequency offset between the two laterally-coupled lasers; the influence of these parameters on locking conditions is explored comprehensively. Our analytic approximations are validated numerically by using a path continuation technique as well as direct numerical integration of the rate equations. More importantly, our results are not restricted by waveguiding structures and uncover a generic locking behavior in the lateral arrays in the presence of injection