The Actuator Design and the Experimental Tests of a New Technology Large Deformable Mirror for Visible Wavelengths Adaptive Optics

Recently, Adaptive Secondary Mirrors showed excellent on-sky results in the Near Infrared wavelengths. They currently provide 30mm inter-actuator spacing and about 1 kHz bandwidth. Pushing these devices to be operated at visible wavelengths is a challenging task. Compared to the current systems, working in the infrared, the more demanding requirements are the higher spatial resolution and the greater correction bandwidth. In fact, the turbulence scale is shorter and the parameter variation is faster. Typically, the former is not larger than 25 mm (projected on the secondary mirror) and the latter is 2 kHz, therefore the actuator has to be more slender and faster than the current ones. With a soft magnetic composite core, a dual-stator and a single-mover, VRALA, the actuator discussed in this paper, attains unprecedented performances with a negligible thermal impact. Pre-shaping the current required to deliver a given stroke greatly simplifies the control system, whose output supplies the current generator. As the inductance depends on the mover position, the electronics of this generator, provided with an inductance measure circuit, works also as a displacement sensor, supplying the control system with an accurate feed-back signal. A preliminary prototype, built according to the several FEA thermo-magnetic analyses, has undergone some preliminary laboratory tests. The results of these checks, matching the design results in terms of power and force, show that the the magnetic design addresses the severe specifications

The numerical simulation tool for the MAORY multiconjugate adaptive optics system

The Multiconjugate Adaptive Optics RelaY (MAORY) is and Adaptive Optics module to be mounted on the ESO European-Extremely Large Telescope (E-ELT). It is a hybrid Natural and Laser Guide System that will perform the correction of the atmospheric turbulence volume above the telescope feeding the Multi-AO Imaging Camera for Deep Observations Near Infrared spectro-imager (MICADO). We developed an end-to-end Monte- Carlo adaptive optics simulation tool to investigate the performance of a the MAORY and the calibration, acquisition, operation strategies. MAORY will implement Multiconjugate Adaptive Optics combining Laser Guide Stars (LGS) and Natural Guide Stars (NGS) measurements. The simulation tool implements the various aspect of the MAORY in an end to end fashion. The code has been developed using IDL and uses libraries in C++ and CUDA for efficiency improvements. Here we recall the code architecture, we describe the modeled instrument components and the control strategies implemented in the code.Comment: 6 pages, 1 figure, Proceeding 9909 310 of the conference SPIE Astronomical Telescopes + Instrumentation 2016, 26 June 1 July 2016 Edinburgh, Scotland, U

The Gray Needle: Large Grains in the HD 15115 Debris Disk from LBT/PISCES/Ks and LBTI/LMIRcam/L' Adaptive Optics Imaging

We present diffraction-limited \ks band and \lprime adaptive optics images of the edge-on debris disk around the nearby F2 star HD 15115, obtained with a single 8.4 m primary mirror at the Large Binocular Telescope. At \ks band the disk is detected at signal-to-noise per resolution element (SNRE) \about 3-8 from \about 1-2\fasec 5 (45-113 AU) on the western side, and from \about 1.2-2\fasec 1 (63-90 AU) on the east. At \lprime the disk is detected at SNRE \about 2.5 from \about 1-1\fasec 45 (45-90 AU) on both sides, implying more symmetric disk structure at 3.8 \microns . At both wavelengths the disk has a bow-like shape and is offset from the star to the north by a few AU. A surface brightness asymmetry exists between the two sides of the disk at \ks band, but not at \lprime . The surface brightness at \ks band declines inside 1\asec (\about 45 AU), which may be indicative of a gap in the disk near 1\asec. The \ks - \lprime disk color, after removal of the stellar color, is mostly grey for both sides of the disk. This suggests that scattered light is coming from large dust grains, with 3-10 \microns -sized grains on the east side and 1-10 \microns dust grains on the west. This may suggest that the west side is composed of smaller dust grains than the east side, which would support the interpretation that the disk is being dynamically affected by interactions with the local interstellar medium.Comment: Apj-accepted March 27 2012; minor correction

First Light LBT AO Images of HR 8799 bcde at 1.65 and 3.3 Microns: New Discrepancies between Young Planets and Old Brown Dwarfs

As the only directly imaged multiple planet system, HR 8799 provides a unique opportunity to study the physical properties of several planets in parallel. In this paper, we image all four of the HR 8799 planets at H-band and 3.3 microns with the new LBT adaptive optics system, PISCES, and LBTI/LMIRCam. Our images offer an unprecedented view of the system, allowing us to obtain H and 3.3$ micron photometry of the innermost planet (for the first time) and put strong upper-limits on the presence of a hypothetical fifth companion. We find that all four planets are unexpectedly bright at 3.3 microns compared to the equilibrium chemistry models used for field brown dwarfs, which predict that planets should be faint at 3.3 microns due to CH4 opacity. We attempt to model the planets with thick-cloudy, non-equilibrium chemistry atmospheres, but find that removing CH4 to fit the 3.3 micron photometry increases the predicted L' (3.8 microns) flux enough that it is inconsistent with observations. In an effort to fit the SED of the HR 8799 planets, we construct mixtures of cloudy atmospheres, which are intended to represent planets covered by clouds of varying opacity. In this scenario, regions with low opacity look hot and bright, while regions with high opacity look faint, similar to the patchy cloud structures on Jupiter and L/T transition brown-dwarfs. Our mixed cloud models reproduce all of the available data, but self-consistent models are still necessary to demonstrate their viability.Comment: Accepted to Ap

Non-modulated pyramid wavefront sensor: Why, how and when to use it to sense and correct atmospheric turbulence

Context. The diffusion of adaptive optics systems in astronomical instrumentation for large ground based telescopes is rapidly increasing and the pyramid wavefront sensor is replacing the Shack-Hartmann as standard solution for single conjugate adaptive optics systems. The pyramid wavefront sensor is typically used with a tip/tilt modulation to increase the linearity range of the sensor, but the non-modulated case is interesting because it maximizes the sensor sensitivity. The latter case is generally avoided for the reduced linearity range that prevents robust operation in the presence of atmospheric turbulence. Aims. We aim to solve part of the issues of the non-modulated pyramid wavefront sensor by reducing the model error in the interaction matrix. We linearize the sensor response in the working conditions without extending the sensor linearity range. Methods. We introduce a new calibration approach to model the response of pyramid wave front sensor in partial correction, where the working conditions in the presence of residual turbulence is considered. Results. We show how in simulations, through the new calibration approach, the pyramid wave front sensor without modulation can be used to sense and correct atmospheric turbulence and when this case is preferable to the modulated case.Comment: 12 pages with 18 figures; accepted for publication in A&

Shack-Hartmann wavefront sensor sensitivity loss factor estimation in partial correction regime

In typical adaptive optics applications, the atmospheric residual turbulence affects the wavefront sensor response decreasing its sensitivity. On the other hand, wavefront sensors are generally calibrated in diffraction limited condition, and, so, the interaction matrix sensitivity may differ from the closed loop one. The ratio between the two sensitivities, that we will call the sensitivity loss factor, has to be estimated to retrieve a well-calibrated measurement. The spots size measurement could give a good estimation, but it is limited to systems with spots well sampled and uniform across the pupil. We present an algorithm to estimate the sensitivity loss factor from closed loop data, based on the known parameters of the closed loop transfer functions. Here we preferred for simplicity the Shack-Hartmann WFS, but the algorithm we propose can be extended to other WFSs

ERIS: revitalising an adaptive optics instrument for the VLT

ERIS is an instrument that will both extend and enhance the fundamental diffraction limited imaging and spectroscopy capability for the VLT. It will replace two instruments that are now being maintained beyond their operational lifetimes, combine their functionality on a single focus, provide a new wavefront sensing module that makes use of the facility Adaptive Optics System, and considerably improve their performance. The instrument will be competitive with respect to JWST in several regimes, and has outstanding potential for studies of the Galactic Center, exoplanets, and high redshift galaxies. ERIS had its final design review in 2017, and is expected to be on sky in 2020. This contribution describes the instrument concept, outlines its expected performance, and highlights where it will most excel.Comment: 12 pages, Proc SPIE 10702 "Ground-Based and Airborne Instrumentation for Astronomy VII

SPRINT for WFAO systems

The calibration of future wide field adaptive optics (WFAO) systems requires knowledge of the geometry of the system, in particular the alignment parameters between the sub-apertures of the wavefront sensors (WFS), pupil and deformable mirror (DM) actuator grid. Without this knowledge, closed-loop operation is not possible and the registration must be identified with an error significantly smaller than the sub-aperture size to achieve the nominal performance of the adaptive optics system. Furthermore, poor accuracy in this estimation will not only affect performance, but could also prevent the closed loop from being stable. Identification is not trivial because in a WFAO system several elements can move with respect to each other, more than in a SCAO system. For example, the pairing of the sub-aperture and the actuator grating on a DM conjugated to an altitude different from 0 can depend on the size of the pupil on the WFS, the exact conjugation of the DM, the position of the guide star and the field rotation. This is the same for each WFS/DM pair. SPRINT, System Parameters Recurrent INvasive Tracking, is a strategy for monitoring and compensating for DM/WFS mis-registrations and has been developed in the context of single conjugate adaptive optics (SCAO) systems for the ESO Extremely Large Telescope (ELT). In this work, we apply SPRINT in the context of WFAO systems with multiple WFSs and DMs, investigating the best approach for such systems, considering a simultaneous identification of all parameters or subsequent steps working on one DM at a time.10 pages, 4 figures. Proceeding of the SPIE conference Adaptive Optics Systems IX, SPIE Astronomical Telescopes + Instrumentation 2024 (Paper No. 13097-171