Влияние интенсивности механической активации на структуру гексагонального нитрида бора

Изучено влияние интенсивности механической активации на микроструктуру и свойства гексагонального нитрида бора (hBN).Вивчено вплив інтенсивності механічної активації на мікроструктуру і властивості гексагонального нітриду бору (hBN).The mechanical activation intensity effect on the microstructure and properties of hexagonal boron nitride (hBN) has been studied

Effect of temporary cements on the shear bond strength of luting cements

OBJECTIVE: The purpose of this study was to evaluate, by shear bond strength (SBS) testing, the influence of different types of temporary cements on the final cementation using conventional and self-etching resin-based luting cements. Material and Methods: Forty human teeth divided in two halves were assigned to 8 groups (n=10): I and V (no temporary cementation); II and VI: Ca(OH)2-based cement; III and VII: zinc oxide (ZO)-based cement; IV and VIII: ZO-eugenol (ZOE)-based cement. Final cementation was done with RelyX ARC cement (groups I to IV) and RelyX Unicem cement (groups V to VIII). Data were analyzed statistically by ANOVA and Tukey's test at 5% significance level. RESULTS: Means were (MPa): I - 3.80 (&plusmn;1.481); II - 5.24 (&plusmn;2.297); III - 6.98 (&plusmn;1.885); IV - 6.54 (&plusmn;1.459); V - 5.22 (&plusmn;2.465); VI - 4.48 (&plusmn;1.705); VII - 6.29 (&plusmn;2.280); VIII - 2.47 (&plusmn;2.076). Comparison of the groups that had the same temporary cementation (Groups II and VI; III and VII; IV and VIII) showed statistically significant difference (p<0.001) only between Groups IV and VIII, in which ZOE-based cements were used. The use of either Ca(OH)2-based (Groups II and VI) or ZO-based (Groups III and VII) cements showed no statistically significant difference (p>0.05) for the different luting cements (RelyX TM ARC and RelyX TM Unicem). The groups that had no temporary cementation (Groups I and V) did not differ significantly from each other either (p>0.05). CONCLUSION: When temporary cementation was done with ZO- or ZOE-based cements and final cementation was done with RelyX ARC, there was an increase in the SBS compared to the control. In the groups cemented with RelyX Unicem, however, the use of a ZOE-based temporary cement affected negatively the SBS of the luting agent used for final cementation

External validation, update and development of prediction models for pre-eclampsia using an Individual Participant Data (IPD) meta-analysis: the International Prediction of Pregnancy Complication Network (IPPIC pre-eclampsia) protocol.

Background: Pre-eclampsia, a condition with raised blood pressure and proteinuria is associated with an increased risk of maternal and offspring mortality and morbidity. Early identification of mothers at risk is needed to target management. Methods/design: We aim to systematically review the existing literature to identify prediction models for pre-eclampsia. We have established the International Prediction of Pregnancy Complication Network (IPPIC), made up of 72 researchers from 21 countries who have carried out relevant primary studies or have access to existing registry databases, and collectively possess data from more than two million patients. We will use the individual participant data (IPD) from these studies to externally validate these existing prediction models and summarise model performance across studies using random-effects meta-analysis for any, late (after 34 weeks) and early (before 34 weeks) onset pre-eclampsia. If none of the models perform well, we will recalibrate (update), or develop and validate new prediction models using the IPD. We will assess the differential accuracy of the models in various settings and subgroups according to the risk status. We will also validate or develop prediction models based on clinical characteristics only; clinical and biochemical markers; clinical and ultrasound parameters; and clinical, biochemical and ultrasound tests. Discussion: Numerous systematic reviews with aggregate data meta-analysis have evaluated various risk factors separately or in combination for predicting pre-eclampsia, but these are affected by many limitations. Our large-scale collaborative IPD approach encourages consensus towards well developed, and validated prognostic models, rather than a number of competing non-validated ones. The large sample size from our IPD will also allow development and validation of multivariable prediction model for the relatively rare outcome of early onset pre-eclampsia. Trial registration: The project was registered on Prospero on the 27 November 2015 with ID: CRD42015029349

Scaling up community-based obesity prevention in Australia: Background and evaluation design of the Health Promoting Communities: Being Active Eating Well initiative

Background : There is only limited evidence available on how best to prevent childhood obesity and community-based interventions hold promise, as several successful interventions have now been published. The Victorian Government has recently funded six disadvantaged communities across Victoria, Australia for three years to promote healthy eating and physical activity for children, families, and adults in a community-based participatory manner. Five of these intervention communities are situated in Primary Care Partnerships and are the subject of this paper. The interventions will comprise a mixture of capacity-building, environmental, and whole-of-community approaches with targeted and population-level interventions. The specific intervention activities will be determined locally within each community through stakeholder and community consultation. Implementation of the interventions will occur through funded positions in primary care and local government. This paper describes the design of the evaluation of the five primary care partnership-based initiatives in the \u27Go for your life\u27 Health Promoting Communities: Being Active Eating Well (HPC:BAEW) initiative.Methods/Design : A mixed method and multi-level evaluation of the HPC:BAEW initiative will capture process, impact and outcome data and involve both local and state-wide evaluators. There will be a combined analysis across the five community intervention projects with outcomes compared to a comparison group using a cross-sectional, quasi-experimental design. The evaluation will capture process, weight status, socio-demographic, obesity-related behavioral and environmental data in intervention and comparison areas. This will be achieved using document analysis, paper-based questionnaires, interviews and direct measures of weight, height and waist circumference from participants (children, adolescents and adults).Discussion : This study will add significant evidence on how to prevent obesity at a population level in disadvantaged and ethnically diverse communities. The outcomes will have direct influence on policy and practice and guide the development and implementation of future obesity prevention efforts in Australia and internationally.<br /

Development and validation of the Australian Aboriginal racial identity and self-esteem survey for 8-12 year old children (IRISE-C)

Introduction: In Australia, there is little empirical research of the racial identity of Indigenous children and youth as the majority of the current literature focuses on adults. Furthermore, there are no instruments developed with cultural appropriateness when exploring the identity and self-esteem of the Australian Aboriginal population, especially children. The IRISE-C (Racial Identity and Self-Esteem of children) inventory was developed to explore the elements of racial identity and self-esteem of urban, rural and regional Aboriginal children. This paper describes the development and validation of the IRISE-C instrument with over 250 Aboriginal children aged 8 to 12 years. Methods: A pilot of the IRISE C instrument was combined with individual interviews and was undertaken with 35 urban Aboriginal children aged 8-12 years. An exploratory factor analysis was performed to refine the survey and reduce redundant items in readiness for the main study. In the main study, the IRISE C was employed to 229 Aboriginal children aged 6-13 years across three sites (rural, regional and urban) in Western Australia. An exploratory factor analysis using Principal axis factoring was used to assess the fit of items and survey structure. A confirmatory factor analysis was then employed using LISREL (diagonally weighted least squares) to assess factor structures across domains. Internal consistency and reliability of subscales were assessed using Cronbach's co-efficient alpha. Results: The pilot testing identified two key concepts - children's knowledge of issues related to their racial identity, and the importance, or salience, that they attach to these issues. In the main study, factor analyses showed two clear factors relating to: Aboriginal culture and traditions; and a sense of belonging to an Aboriginal community. Principal Axis Factoring of the Knowledge items supported a 2-factor solution, which explained 38.7 % of variance. Factor One (Aboriginal culture) had a Cronbach's alpha of 0.835; Factor 2 (racial identity) had a Cronbach's alpha of 0.800, thus demonstrating high internal reliability of the scales. Conclusion: The IRISE-C has been shown to be a valid instrument useful of exploring the development of racial identity of Australian Aboriginal children across the 8-12 year old age range and across urban, rural and regional geographical locations

Utilising neural networks and closed form solutions to determine static creep behaviour and optimal polypropylene amount in bituminous mixtures

WOS: 000311554400007The testing procedure in order to determine the precise mechanical testing results in Marshall design is very time consuming. Also, the physical properties of the asphalt samples are obtained by further calculations. Therefore if the researchers can obtain the stability and flow values of a standard mixture with the help of mechanical testing, the rest of the calculations will just be mathematical manipulations. Determination of mechanical testing parameters such as strain accumulation, creep stiffness, stability, flow and Marshall Quotient of dense bituminous mixtures by utilising artificial neural networks is important in the sense that, cumbersome testing procedures can be avoided with the help of the closed form solutions provided in this study. Marshall specimens, prepared by utilising polypropylene fibers, were tested by universal testing machine carrying out static creep tests to investigate the rutting potential of these mixtures. On the very well trained data basis, artificial neural network analyses were carried out to propose five separate models for mechanical testing properties. The explicit formulation of these five main mechanical testing properties by closed form solutions are presented for further use for researches

Characterization of human and rodent native and recombinant adenosine A2B receptors by radioligand binding studies

Adenosine A2B receptors of native human and rodent cell lines were investigated using [3H]PSB-298 [(8-{4-[2-(2-hydroxyethylamino)-2-oxoethoxy]phenyl}-1-propylxanthine] in radioligand binding studies. [3H]PSB-298 showed saturable and reversible binding. It exhibited a KD value of 60 ± 1 nM and limited capacity (Bmax = 3.511 fmol per milligram protein) at recombinant human adenosine A2B receptors expressed in human embryonic kidney cells (HEK-293). The addition of sodium chloride (100 mM) led to a threefold increase in the number of binding sites recognized by the radioligand. The curve of the agonist 5′-N-ethylcarboxamidoadenosine (NECA) was shifted to the right in the presence of NaCl, while the curve of the antagonist PSB-298 was shifted to the left, indicating that PSB-298 may be an inverse agonist at A2B receptors. Adenosine A2B receptors were shown to be the major adenosine A2 receptor subtype on the mouse neuroblastoma x rat glioma hybrid cell line NG108-15 cells. Binding studies at rat INS-1 cells (insulin secreting cell line) demonstrated that [3H]PSB-298 is a selective radioligand for adenosine A2B binding sites in this cell line