Magnetic topology of active regions and coronal holes: implications for coronal outflows and the solar wind

During 2-18 January 2008 a pair of low-latitude opposite-polarity coronal holes (CHs) were observed on the Sun with two active regions (ARs) and the heliospheric plasma sheet located between them. We use the Hinode/EUV Imaging Spectrometer (EIS) to locate AR-related outflows and measure their velocities. Solar-Terrestrial Relations Observatory (STEREO) imaging is also employed, as are the Advanced Composition Explorer (ACE) in-situ observations, to assess the resulting impacts on the solar wind (SW) properties. Magnetic-field extrapolations of the two ARs confirm that AR plasma outflows observed with EIS are co-spatial with quasi-separatrix layer locations, including the separatrix of a null point. Global potential-field source-surface modeling indicates that field lines in the vicinity of the null point extend up to the source surface, enabling a part of the EIS plasma upflows access to the SW. We find that similar upflow properties are also observed within closed-field regions that do not reach the source surface. We conclude that some of plasma upflows observed with EIS remain confined along closed coronal loops, but that a fraction of the plasma may be released into the slow SW. This suggests that ARs bordering coronal holes can contribute to the slow SW. Analyzing the in-situ data, we propose that the type of slow SW present depends on whether the AR is fully or partially enclosed by an overlying streamer. © 2012 Springer Science+Business Media B.V

Modelling of proton acceleration in application to a ground level enhancement

Context. The source of high-energy protons (above similar to 500 MeV) responsible for ground level enhancements (GLEs) remains an open question in solar physics. One of the candidates is a shock wave driven by a coronal mass ejection, which is thought to accelerate particles via diffusive-shock acceleration.Aims. We perform physics-based simulations of proton acceleration using information on the shock and ambient plasma parameters derived from the observation of a real GLE event. We analyse the simulation results to find out which of the parameters are significant in controlling the acceleration efficiency and to get a better understanding of the conditions under which the shock can produce relativistic protons.Methods. We use the results of the recently developed technique to determine the shock and ambient plasma parameters, applied to the 17 May 2012 GLE event, and carry out proton acceleration simulations with the Coronal Shock Acceleration (CSA) model.Results. We performed proton acceleration simulations for nine individual magnetic field lines characterised by various plasma conditions. Analysis of the simulation results shows that the acceleration efficiency of the shock, i. e. its ability to accelerate particles to high energies, tends to be higher for those shock portions that are characterised by higher values of the scattering-centre compression ratio r(c) and/or the fast-mode Mach number MFM. At the same time, the acceleration efficiency can be strengthened by enhanced plasma density in the corresponding flux tube. The simulations show that protons can be accelerated to GLE energies in the shock portions characterised by the highest values of rc. Analysis of the delays between the flare onset and the production times of protons of 1 GV rigidity for different field lines in our simulations, and a subsequent comparison of those with the observed values indicate a possibility that quasi-perpendicular portions of the shock play the main role in producing relativistic protons

Connecting the Properties of Coronal Shock Waves with Those of Solar Energetic Particles

We develop and exploit a new catalog of coronal pressure waves modeled in 3D to study the potential role of these waves in accelerating solar energetic particles (SEPs) measured in situ. Our sample comprises modeled shocks and SEP events detected during solar cycle 24 observed over a broad range of longitudes. From the 3D reconstruction of shock waves using coronagraphic observations we derived the 3D velocity along the entire front as a function of time. Combining new reconstruction techniques with global models of the solar corona, we derive the 3D distribution of basic shock parameters such as Mach numbers, compression ratios, and shock geometry. We then model in a time-dependent manner how the shock wave connects magnetically with spacecraft making in situ measurements of SEPs. This allows us to compare modeled shock parameters deduced at the magnetically well-connected regions, with different key parameters of SEPs such as their maximum intensity. This approach accounts for projection effects associated with remote-sensing observations and constitutes the most extensive study to date of shock waves in the corona and their relation to SEPs. We find a high correlation between the maximum flux of SEPs and the strength of coronal shock waves quantified, for instance, by the Mach number. We discuss the implications of that work for understanding particle acceleration in the corona

The first ground-level enhancement of solar cycle 25 on 28 October 2021

Aims. The first relativistic solar proton event of solar cycle 25 was detected on 28 October 2021 by neutron monitors (NMs) on the ground and particle detectors on board spacecraft in near-Earth space. This is the first ground-level enhancement (GLE) of the current cycle. A detailed reconstruction of the NM response together with the identification of the solar eruption that generated these particles is investigated based on in situ and remote-sensing measurements. Methods. In situ proton observations from a few MeV to similar to 500 MeV were combined with the detection of a solar flare in soft X-rays, a coronal mass ejection, radio bursts, and extreme ultraviolet (EUV) observations to identify the solar origin of the GLE. Timing analysis was performed, and a relation to the solar sources was outlined. Results. GLE73 reached a maximum particle rigidity of similar to 2.4 GV and is associated with type III, type II, and type IV radio bursts and an EUV wave. A diversity of time profiles recorded by NMs was observed. This points to the event having an anisotropic nature. The peak flux at E & x2004;>& x2004;10 MeV was only similar to 30 pfu and remained at this level for several days. The release time of >= 1 GV particles was found to be similar to 15:40 UT. GLE73 had a moderately hard rigidity spectrum at very high energies (gamma & x2004;similar to & x2004;5.5). Comparison of GLE73 to previous GLEs with similar solar drivers is performed.</p

Flux rope and dynamics of the heliospheric current sheet Study of the Parker Solar Probe and Solar Orbiter conjunction of June 2020

Context: Solar Orbiter and Parker Solar Probe jointly observed the solar wind for the first time in June 2020, capturing data from very different solar wind streams: calm, Alfvénic wind and also highly dynamic large-scale structures. Context. Our aim is to understand the origin and characteristics of the highly dynamic solar wind observed by the two probes, particularly in the vicinity of the heliospheric current sheet (HCS). Methods: We analyzed the plasma data obtained by Parker Solar Probe and Solar Orbiter in situ during the month of June 2020. We used the Alfvén-wave turbulence magnetohydrodynamic solar wind model WindPredict-AW and we performed two 3D simulations based on ADAPT solar magnetograms for this period. Results: We show that the dynamic regions measured by both spacecraft are pervaded by flux ropes close to the HCS. These flux ropes are also present in the simulations, forming at the tip of helmet streamers, that is, at the base of the heliospheric current sheet. The formation mechanism involves a pressure-driven instability followed by a fast tearing reconnection process. We further characterize the 3D spatial structure of helmet streamer born flux ropes, which appears in the simulations to be related to the network of quasi-separatrices

Skewness and kurtosis of solar wind proton distribution functions: The normal inverse-Gaussian model and its implications

CONTEXT: In the solar wind (SW), the particle distribution functions are generally not Gaussian. They present nonthermal features that are related to underlying acceleration and heating processes. These processes are critical in the overall dynamics of this expanding astrophysical fluid. AIMS: The Proton Alpha Sensor (PAS) on board Solar Orbiter commonly observes skewed proton distributions, with a more populated high-energy side in the magnetic field direction than the Gaussian distribution. Our objectives are: (1) to identify a theoretical statistical function that adequately models the observed distributions and (2) to use its statistical interpretation to constrain the acceleration and heating processes. METHODS: We analyzed the 3D velocity distribution functions (VDFs) measured by PAS and compared them to model statistical functions. RESULTS: We show that the normal inverse Gaussian (NIG), a type of hyperbolic statistical distribution, provides excellent fits of skewed and leptokurtic proton distributions. NIG can model both the core distribution and the beam, if present. We propose an interpretation that is inspired by the mathematical formulation of the NIG. It assumes that the acceleration or heating mechanism can be modeled as a drifting diffusion process in velocity space, controlled (or subordinated) by the time of interaction of the particles with “accelerating structures”. The probability function of the interaction time is an inverse Gaussian (IG), obtained by considering a random drift across structures of a given size. The control of the diffusion by interaction times that follow an IG probability function formally defines the NIG distribution. Following this model, we show that skewness and kurtosis can be used to estimate the kinetic and thermal energy gains provided by the interaction with structures. For example, in the case studies presented here, the analyzed populations would have gained kinetic energy representing approximately two to four times their thermal energy, with an increase in velocity – due to acceleration – of from one-tenth to one-third of the observed flow velocity. We also show that the model constrains the initial temperature of the populations. CONCLUSIONS: Overall, the NIG model offers excellent fits of the observed proton distributions. Combining the skewness and the kurtosis, it also leads to constraints in the part of acceleration and heating due to the interactions with structures in the formation of the proton populations. We suggest that these effects add to the classical thermal evolution of the bulk velocity and temperature resulting from SW expansion

The first widespread solar energetic particle event of solar cycle 25 on 2020 November 29 Shock wave properties and the wide distribution of solar energetic particles

Context. On 2020 November 29, an eruptive event occurred in an active region located behind the eastern solar limb as seen from Earth. The event consisted of an M4.4 class flare, a coronal mass ejection, an extreme ultraviolet (EUV) wave, and a white-light (WL) shock wave. The eruption gave rise to the first widespread solar energetic particle (SEP) event of solar cycle 25, which was observed at four widely separated heliospheric locations (similar to 230 degrees).Aims. Our aim is to better understand the source of this widespread SEP event, examine the role of the coronal shock wave in the wide distribution of SEPs, and investigate the shock wave properties at the field lines magnetically connected to the spacecraft.Methods. Using EUV and WL data, we reconstructed the global three-dimensional structure of the shock in the corona and computed its kinematics. We determined the magnetic field configurations in the corona and interplanetary space, inferred the magnetic connectivity of the spacecraft with the shock surface, and derived the evolution of the shock parameters at the connecting field lines.Results. Remote sensing observations show formation of the coronal shock wave occurring early during the eruption, and its rapid propagation to distant locations. The results of the shock wave modelling show multiple regions where a strong shock has formed and efficient particle acceleration is expected to take place. The pressure/shock wave is magnetically connected to all spacecraft locations before or during the estimated SEP release times. The release of the observed near-relativistic electrons occurs predominantly close to the time when the pressure/shock wave connects to the magnetic field lines or when the shock wave becomes supercritical, whereas the proton release is significantly delayed with respect to the time when the shock wave becomes supercritical, with the only exception being the proton release at the Parker Solar Probe.Conclusions. Our results suggest that the shock wave plays an important role in the spread of SEPs. Supercritical shock regions are connected to most of the spacecraft. The particle increase at Earth, which is barely connected to the wave, also suggests that the cross-field transport cannot be ignored. The release of energetic electrons seems to occur close to the time when the shock wave connects to, or becomes supercritical at, the field lines connecting to the spacecraft. Energetic protons are released with a time-delay relative to the time when the pressure/shock wave connects to the spacecraft locations. We attribute this delay to the time that it takes for the shock wave to accelerate protons efficiently.</p

Magnetic reconnection as a mechanism to produce multiple protonpopulations and beams locally in the solar wind

Context. Spacecraft observations early revealed frequent multiple proton populations in the solar wind. Decades of research on their origin have focused on processes such as magnetic reconnection in the low corona and wave-particle interactions in the corona and locally in the solar wind.Aims.This study aims to highlight that multiple proton populations and beams are also produced by magnetic reconnection occurring locally in the solar wind. Methods. We use high resolution Solar Orbiter proton velocity distribution function measurements, complemented by electron and magnetic field data, to analyze the association of multiple proton populations and beams with magnetic reconnection during a period of slow Alfv\'enic solar wind on 16 July 2020. Results. At least 6 reconnecting current sheets with associated multiple proton populations and beams, including a case of magnetic reconnection at a switchback boundary, are found during this day. This represents 2% of the measured distribution functions. We discuss how this proportion may be underestimated, and how it may depend on solar wind type and distance from the Sun. Conclusions. Although suggesting a likely small contribution, but which remains to be quantitatively assessed, Solar Orbiter observations show that magnetic reconnection must be considered as one of the mechanisms that produce multiple proton populations and beams locally in the solar wind

From DPSIR the DAPSI(W)R(M) Emerges… a Butterfly – ‘protecting the natural stuff and delivering the human stuff’

The complexity of interactions and feedbacks between human activities and ecosystems can make the analysis of such social-ecological systems intractable. In order to provide a common means to understand and analyse the links between social and ecological process within these systems, a range of analytical frameworks have been developed and adopted. Following decades of practical experience in implementation, the Driver Pressure State Impact Response (DPSIR) conceptual framework has been adapted and re-developed to become the D(A)PSI(W)R(M). This paper describes in detail the D(A)PSI(W)R(M) and its development from the original DPSIR conceptual frame. Despite its diverse application and demonstrated utility, a number of inherent shortcomings are identified. In particular the DPSIR model family tend to be best suited to individual environmental pressures and human activities and their resulting environmental problems, having a limited focus on the supply and demand of benefits from nature. We present a derived framework, the “Butterfly”, a more holistic approach designed to expand the concept. The “Butterfly” model, moves away from the centralised accounting framework approach while more-fully incorporating the complexity of social and ecological systems, and the supply and demand of ecosystem services, which are central to human-environment interactions

Coordination of the in situ payload of Solar Orbiter

Solar Orbiter’s in situ coordination working group met frequently during the development of the mission with the goal of ensuring that its in situ payload has the necessary level of coordination to maximise science return. Here we present the results of that work, namely how the design of each of the in situ instruments (EPD, MAG, RPW, SWA) was guided by the need for coordination, the importance of time synchronisation, and how science operations will be conducted in a coordinated way. We discuss the mechanisms by which instrument sampling schemes are aligned such that complementary measurements will be made simultaneously by different instruments, and how burst modes are scheduled to allow a maximum overlap of burst intervals between the four instruments (telemetry constraints mean different instruments can spend different amounts of time in burst mode). We also explain how onboard autonomy, inter-instrument communication, and selective data downlink will be used to maximise the number of transient events that will be studied using high-resolution modes of all the instruments. Finally, we briefly address coordination between Solar Orbiter’s in situ payload and other missions