Analisiskkinerja Perusahaan Dengan Menggunakan Metode Balanced Scorecardgguna Menilai Kesehatan USAha Bumn (Studi Pada PT. Pg. Rajawali I Unit Pg. Krebet Baru Malang Pada Periode 2012-2014)

The purpose of this study is to determine the stage of the business by implementing the Balanced Scorecard method which is based on the Ministerial Decree No. 100 of 2002 for state-owned enterprises on PT. PG. Rajawali I Unit PG. Krebet Baru Malang. The analysis on company performance can to assists of the further analyze the possibility of some of the strategies that must be corrected in maintaining or improving the health of the business so that companies business can run more effectively and efficiently. The analysis showed that the results of the total score of each year fluctuated financial perspective, which is in 2012 amounted to 52.6, 44.7 in 2013, and in 2014 by 55, while the results of the total score of each year the customer perspective, internal business processes and learning and growth has been very good every year. Implications for PT. PG. Rajawali I Unit PG. Krebet Baru Malang as the form of corrective actions that can be used to keep the development of the company, therefore the improvement focus on the company that should be increased can be identified, as well as the expectation of the companies betterment in the future

Properties of sediments deposited in a fluid with different pH

This is the author accepted manuscript. The final version is available from Taylor & Francis via the DOI in this recordThe effect of pH on the physical and mechanical properties of a sediment was investigated through a set of experimental tests. The sediment was formed from deposition of suspended particles in a fluid. Two different types of clay soil were suspended in fluids with different pH (2, 4, 7, 9 and 11) in cylindrical tubes with volume of 1 liter and also in special cylindrical reservoirs. The height of the sediment was measured in the cylindrical tube until equilibrium was achieved. The sediment deposited in the reservoirs was dried in air and then Atterberg limit, compaction and unconfined compressive strength (UCS) tests were conducted on samples prepared from each sediment. The results showed that the final height of the settled sediment is a function of pH; the height of sediment is increased with increasing the pH. Also, the Atterberg limits increased with increasing the pH. The maximum dry unit weight and optimum water content decreased and increased with increasing the pH. The final strength of the sediment decreased with increasing pH. Based on the SEM analysis, it was found that the values of pH influence the properties of the formed sediments

Analysis of Mental Workload in Sugar Factory Production Workers Using the NASA-TLX Method

Company XYZ is a sugar manufacturing company where it has several processing sequence including milling until crystallization. Methods used in this research are NASA-TLX in order to measure mental workload of employees caused by a severe work environment such as dust and gas exposure, and a not optimum temperature. The findings shed a light on the significant of Own Performance (OP) among the others parameter of NASA-TLX. Showing that the main component of workers’ stress are coming from the performance itself with 534.333 index of OP. With the laboratory works at the company makes the top compared to the other jobs. This study shows company XYZ to improve in certain aspects. This will help improvements to be on target

Missing paternal demographics: A novel indicator for identifying high risk population of adverse pregnancy outcomes

BACKGROUND: One of every 6 United Status birth certificates contains no information on fathers. There might be important differences in the pregnancy outcomes between mothers with versus those without partner information. The object of this study was to assess whether and to what extent outcomes in pregnant women who did not have partner information differ from those who had. METHODS: We carried out a population-based retrospective cohort study based on the registry data in the United States for the period of 1995–1997, which was a matched multiple birth file (only twins were included in the current analysis). We divided the study subjects into three groups according to the availability of partner information: available, partly missing, and totally missing. We compared the distribution of maternal characteristics, maternal morbidity, labor and delivery complications, obstetric interventions, preterm birth, fetal growth restriction, low birth weight, congenital anomalies, fetal death, neonatal death, post-neonatal death, and neonatal morbidity among three study groups. RESULTS: There were 304466 twins included in our study. Mothers whose partner's information was partly missing and (especially) totally missing tended to be younger, of black race, unmarried, with less education, smoking cigarette during pregnancy, and with inadequate prenatal care. The rates of preterm birth, fetal growth restriction, low birth weight, Apgar score <7, fetal mortality, neonatal mortality, and post-neonatal mortality were significantly increased in mothers whose partner's information was partly or (especially) totally missing. CONCLUSIONS: Mothers whose partner's information was partly and (especially) totally missing are at higher risk of adverse pregnant outcomes, and clinicians and public health workers should be alerted to this important social factor

Petrographical and geochemical evidences for paragenetic sequence interpretation of diagenesis in mixed siliciclastic–carbonate sediments: Mozduran Formation (Upper Jurassic), south of Agh-Darband, NE Iran

The Upper Jurassic Mozduran Formation with a thickness of 420 m at the type locality is the most important gas-bearing reservoir in NE Iran. It is mainly composed of limestone, dolostone with shale and gypsum interbeds that grade into coarser siliciclastics in the easternmost part of the basin. Eight stratigraphic sections were studied in detail in south of the Agh-Darband area. These analyses suggest that four carbonate facies associations and three siliciclastic lithofacies were deposited in shallow marine to shoreline environments, respectively. Cementation, compaction, dissolution, micritization, neomorphism, hematitization, dolomitization and fracturing are diagenetic processes that affected these sediments.Stable isotope variations of δ18O and δ13C in carbonate rocks show two different trends. High depletion of δ18O and low variation of δ13C probably reflect increasing temperatures during burial diagenesis, while the higher depletion in carbon isotope values with low variations in oxygen isotopes are related to fresh water flushing during meteoric diagenesis. Negative values of carbon isotopes may have also resulted from organic matter alteration during penetration of meteoric water. Fe and Mn enrichment with depletion of δ18O also supports the contention that alteration associated with higher depletion in carbon isotope values with low variations in oxygen isotopes took place during meteoric diagenesis. The presence of bright luminescence indicates redox conditions during precipitation of calcite cement

Prevalence of diabetic retinopathy in Tehran province: a population-based study

<p>Abstract</p> <p>Background</p> <p>To determine the prevalence and characteristics of diabetic retinopathy (DR) among Iranian patients with diabetes.</p> <p>Methods</p> <p>Design: population-based cross-sectional study.</p> <p>Participants: patients with diabetes aged 25 to 64 years in Tehran province, Iran. This survey was conducted from April to October 2007. The study sample was derived from the first national survey of risk factors for non-communicable disease. Diabetes mellitus was defined as a fasting plasma glucose of ≥ 7.0 mmol/l (126 mg/dl) or more, use of diabetic medications, or a physician's diagnosis of diabetes. All patients known to have diabetes underwent an eye examination by bio-microscope and indirect ophthalmoscope to check for any signs of DR through dilated pupils by + 78 lens. Participants were also interviewed and examined to determine their demographic characteristics, medical conditions and the regularity of their eye visits.</p> <p>Results</p> <p>Among 7989 screened patients, 759 (9.5%) had diabetes. Of them, 639 patients (84.2%) underwent eye examination. Five patients (0.7%) with media opacity were excluded. Of 634 examined patients with diabetes, 240 had some degree of diabetic retinopathy, and the overall standardized prevalence of any retinopathy was 37.0% (95% CI: 33.2-40.8), including 27.3% (95% CI: 23.7-30.8) (n = 175) with non-proliferative and 9.6% (95% CI: 7.3-11.9) (n = 65) with proliferative diabetic retinopathy. Clinically significant macular edema and vision-threatening retinopathy were detected in 5.8% (95% CI: 4.0-7.7) (n = 38) and 14.0% (95% CI: 11.3-16.7) (n = 95) of patients, respectively. Only 143 patients (22.6%) with diabetes had a history of regular eye examination.</p> <p>Conclusion</p> <p>This study demonstrated a high prevalence and poor control of DR in Tehran province. This suggests the need for adequate prevention and treatment in patients with diabetes.</p

Three-dimensional bio-printing and bone tissue engineering: technical innovations and potential applications in maxillofacial reconstructive surgery

Background Bone grafting has been considered the gold standard for hard tissue reconstructive surgery and is widely used for large mandibular defect reconstruction. However, the midface encompasses delicate structures that are surrounded by a complex bone architecture, which makes bone grafting using traditional methods very challenging. Three-dimensional (3D) bioprinting is a developing technology that is derived from the evolution of additive manufacturing. It enables precise development of a scaffold from different available biomaterials that mimic the shape, size, and dimension of a defect without relying only on the surgeon’s skills and capabilities, and subsequently, may enhance surgical outcomes and, in turn, patient satisfaction and quality of life. Review This review summarizes different biomaterial classes that can be used in 3D bioprinters as bioinks to fabricate bone scaffolds, including polymers, bioceramics, and composites. It also describes the advantages and limitations of the three currently used 3D bioprinting technologies: inkjet bioprinting, micro-extrusion, and laser-assisted bioprinting. Conclusions Although 3D bioprinting technology is still in its infancy and requires further development and optimization both in biomaterials and techniques, it offers great promise and potential for facial reconstruction with improved outcome

In vivo and in silico determination of essential genes of Campylobacter jejuni

<p>Abstract</p> <p>Background</p> <p>In the United Kingdom, the thermophilic <it>Campylobacter </it>species <it>C. jejuni </it>and <it>C. coli </it>are the most frequent causes of food-borne gastroenteritis in humans. While campylobacteriosis is usually a relatively mild infection, it has a significant public health and economic impact, and possible complications include reactive arthritis and the autoimmune diseases Guillain-Barré syndrome. The rapid developments in "omics" technologies have resulted in the availability of diverse datasets allowing predictions of metabolism and physiology of pathogenic micro-organisms. When combined, these datasets may allow for the identification of potential weaknesses that can be used for development of new antimicrobials to reduce or eliminate <it>C. jejuni </it>and <it>C. coli </it>from the food chain.</p> <p>Results</p> <p>A metabolic model of <it>C. jejuni </it>was constructed using the annotation of the NCTC 11168 genome sequence, a published model of the related bacterium <it>Helicobacter pylori</it>, and extensive literature mining. Using this model, we have used <it>in silico </it>Flux Balance Analysis (FBA) to determine key metabolic routes that are essential for generating energy and biomass, thus creating a list of genes potentially essential for growth under laboratory conditions. To complement this <it>in silico </it>approach, candidate essential genes have been determined using a whole genome transposon mutagenesis method. FBA and transposon mutagenesis (both this study and a published study) predict a similar number of essential genes (around 200). The analysis of the intersection between the three approaches highlights the shikimate pathway where genes are predicted to be essential by one or more method, and tend to be network hubs, based on a previously published <it>Campylobacter </it>protein-protein interaction network, and could therefore be targets for novel antimicrobial therapy.</p> <p>Conclusions</p> <p>We have constructed the first curated metabolic model for the food-borne pathogen <it>Campylobacter jejuni </it>and have presented the resulting metabolic insights. We have shown that the combination of <it>in silico </it>and <it>in vivo </it>approaches could point to non-redundant, indispensable genes associated with the well characterised shikimate pathway, and also genes of unknown function specific to <it>C. jejuni</it>, which are all potential novel <it>Campylobacter </it>intervention targets.</p

Global, regional, and national burden of chronic kidney disease, 1990–2017: a systematic analysis for the Global Burden of Disease Study 2017

© 2020 The Author(s). Published by Elsevier Ltd. This is an Open Access Article under the CC BY 4.0 license. Background: Health system planning requires careful assessment of chronic kidney disease (CKD) epidemiology, but data for morbidity and mortality of this disease are scarce or non-existent in many countries. We estimated the global, regional, and national burden of CKD, as well as the burden of cardiovascular disease and gout attributable to impaired kidney function, for the Global Burden of Diseases, Injuries, and Risk Factors Study 2017. We use the term CKD to refer to the morbidity and mortality that can be directly attributed to all stages of CKD, and we use the term impaired kidney function to refer to the additional risk of CKD from cardiovascular disease and gout. Methods: The main data sources we used were published literature, vital registration systems, end-stage kidney disease registries, and household surveys. Estimates of CKD burden were produced using a Cause of Death Ensemble model and a Bayesian meta-regression analytical tool, and included incidence, prevalence, years lived with disability, mortality, years of life lost, and disability-adjusted life-years (DALYs). A comparative risk assessment approach was used to estimate the proportion of cardiovascular diseases and gout burden attributable to impaired kidney function. Findings: Globally, in 2017, 1·2 million (95% uncertainty interval [UI] 1·2 to 1·3) people died from CKD. The global all-age mortality rate from CKD increased 41·5% (95% UI 35·2 to 46·5) between 1990 and 2017, although there was no significant change in the age-standardised mortality rate (2·8%, −1·5 to 6·3). In 2017, 697·5 million (95% UI 649·2 to 752·0) cases of all-stage CKD were recorded, for a global prevalence of 9·1% (8·5 to 9·8). The global all-age prevalence of CKD increased 29·3% (95% UI 26·4 to 32·6) since 1990, whereas the age-standardised prevalence remained stable (1·2%, −1·1 to 3·5). CKD resulted in 35·8 million (95% UI 33·7 to 38·0) DALYs in 2017, with diabetic nephropathy accounting for almost a third of DALYs. Most of the burden of CKD was concentrated in the three lowest quintiles of Socio-demographic Index (SDI). In several regions, particularly Oceania, sub-Saharan Africa, and Latin America, the burden of CKD was much higher than expected for the level of development, whereas the disease burden in western, eastern, and central sub-Saharan Africa, east Asia, south Asia, central and eastern Europe, Australasia, and western Europe was lower than expected. 1·4 million (95% UI 1·2 to 1·6) cardiovascular disease-related deaths and 25·3 million (22·2 to 28·9) cardiovascular disease DALYs were attributable to impaired kidney function. Interpretation: Kidney disease has a major effect on global health, both as a direct cause of global morbidity and mortality and as an important risk factor for cardiovascular disease. CKD is largely preventable and treatable and deserves greater attention in global health policy decision making, particularly in locations with low and middle SDI. Funding: Bill & Melinda Gates Foundation