En los márgenes del canon y al borde de la sinrazón. Georg Büchner y el mundo al revés de Leonce und Lena

La obra de Büchner tuvo que esperar casi un siglo a ser apreciada o siquiera conocida. Aunque actualmente se le incluye dentro de las Historias de la literatura, alemana y universal, como uno de los grandes autores del XIX, no termina de encajar en ninguna de las categorí- as en las que se estudian las distintas épocas y tendencias (como tampoco Kleist, Hölderlin, Jean Paul o Heine) y siempre queda clasificado como "inclasificable". Ya es un autor canó- nico, pero dentro del canon se considera un caso aparte. Por otro lado, también los recursos formales y temáticos que utiliza pueden considerarse marginales en el sentido de "transgresores " o "llevados hasta el último extremo". La comedia Leonce und Lena (1836) es en apariencia su obra más ligera y amable pero, en realidad, revela una forma y un dramatismo tan grotescos, radicales y modernos como el resto

Designing new network adaptation and ATM adaptation layers for interactive multimedia applications

Multimedia services, audiovisual applications composed of a combination of discrete and continuous data streams, will be a major part of the traffic flowing in the next generation of high speed networks. The cornerstones for multimedia are Asynchronous Transfer Mode (ATM) foreseen as the technology for the future Broadband Integrated Services Digital Network (B-ISDN) and audio and video compression algorithms such as MPEG-2 that reduce applications bandwidth requirements. Powerful desktop computers available today can integrate seamlessly the network access and the applications and thus bring the new multimedia services to home and business users. Among these services, those based on multipoint capabilities are expected to play a major role.    Interactive multimedia applications unlike traditional data transfer applications have stringent simultaneous requirements in terms of loss and delay jitter due to the nature of audiovisual information. In addition, such stream-based applications deliver data at a variable rate, in particular if a constant quality is required.    ATM, is able to integrate traffic of different nature within a single network creating interactions of different types that translate into delay jitter and loss. Traditional protocol layers do not have the appropriate mechanisms to provide the required network quality of service (QoS) for such interactive variable bit rate (VBR) multimedia multipoint applications. This lack of functionalities calls for the design of protocol layers with the appropriate functions to handle the stringent requirements of multimedia.    This thesis contributes to the solution of this problem by proposing new Network Adaptation and ATM Adaptation Layers for interactive VBR multimedia multipoint services.    The foundations to build these new multimedia protocol layers are twofold; the requirements of real-time multimedia applications and the nature of compressed audiovisual data.    On this basis, we present a set of design principles we consider as mandatory for a generic Multimedia AAL capable of handling interactive VBR multimedia applications in point-to-point as well as multicast environments. These design principles are then used as a foundation to derive a first set of functions for the MAAL, namely; cell loss detection via sequence numbering, packet delineation, dummy cell insertion and cell loss correction via RSE FEC techniques.    The proposed functions, partly based on some theoretical studies, are implemented and evaluated in a simulated environment. Performances are evaluated from the network point of view using classic metrics such as cell and packet loss. We also study the behavior of the cell loss process in order to evaluate the efficiency to be expected from the proposed cell loss correction method. We also discuss the difficulties to map network QoS parameters to user QoS parameters for multimedia applications and especially for video information. In order to present a complete performance evaluation that is also meaningful to the end-user, we make use of the MPQM metric to map the obtained network performance results to a user level. We evaluate the impact that cell loss has onto video and also the improvements achieved with the MAAL.    All performance results are compared to an equivalent implementation based on AAL5, as specified by the current ITU-T and ATM Forum standards.    An AAL has to be by definition generic. But to fully exploit the functionalities of the AAL layer, it is necessary to have a protocol layer that will efficiently interface the network and the applications. This role is devoted to the Network Adaptation Layer.    The network adaptation layer (NAL) we propose, aims at efficiently interface the applications to the underlying network to achieve a reliable but low overhead transmission of video streams. Since this requires an a priori knowledge of the information structure to be transmitted, we propose the NAL to be codec specific.    The NAL targets interactive multimedia applications. These applications share a set of common requirements independent of the encoding scheme used. This calls for the definition of a set of design principles that should be shared by any NAL even if the implementation of the functions themselves is codec specific. On the basis of the design principles, we derive the common functions that NALs have to perform which are mainly two; the segmentation and reassembly of data packets and the selective data protection.    On this basis, we develop an MPEG-2 specific NAL. It provides a perceptual syntactic information protection, the PSIP, which results in an intelligent and minimum overhead protection of video information. The PSIP takes advantage of the hierarchical organization of the compressed video data, common to the majority of the compression algorithms, to perform a selective data protection based on the perceptual relevance of the syntactic information.    The transmission over the combined NAL-MAAL layers shows significant improvement in terms of CLR and perceptual quality compared to equivalent transmissions over AAL5 with the same overhead.    The usage of the MPQM as a performance metric, which is one of the main contributions of this thesis, leads to a very interesting observation. The experimental results show that for unexpectedly high CLRs, the average perceptual quality remains close to the original value. The economical potential of such an observation is very important. Given that the data flows are VBR, it is possible to improve network utilization by means of statistical multiplexing. It is therefore possible to reduce the cost per communication by increasing the number of connections with a minimal loss in quality.    This conclusion could not have been derived without the combined usage of perceptual and network QoS metrics, which have been able to unveil the economic potential of perceptually protected streams.    The proposed concepts are finally tested in a real environment where a proof-of-concept implementation of the MAAL has shown a behavior close to the simulated results therefore validating the proposed multimedia protocol layers

Development of new Mn-based oxygen carriers using MgO and SiO2 as supports for Chemical Looping with Oxygen Uncoupling (CLOU)

Chemical Looping with Oxygen Uncoupling (CLOU) is a technological adaptation of CLC, most applicable for the combustion of solid fuels. In the CLOU process, an oxygen carrier in the fuel reactor, avoiding the direct contact of the fuel with the air, releases the oxygen needed for the fuel combustion. The oxygen carrier is regenerated with air in the interconnected air reactor. The present work explores the behavior of the system Mn/Mg/Si as oxygen carriers for chemical-looping with oxygen uncoupling (CLOU). Six different mixed oxides of the system Mn/Mg/Si were investigated for the CLC/CLOU process. Materials were prepared by spray drying with different metal ratios used in the investigation. The properties of interest for the viability of these materials are the lattice oxygen supply for CLC and the gaseous oxygen release for CLOU, properties that were explored in a TGA. Further, the fluidization behavior and the mechanical resistance were investigated in a batch fluidized bed reactor. In the TGA it was observed that the most reactive oxygen carriers for the CLOU process were materials without Si in the structure, more specifically M24Mg76 and M48Mg51 which had a molar ratio of Mn/Mg of 0.17 and 0.51 respectively. It was also observed that for the oxygen carriers with Si in the composition, the regeneration was very poor. Oxygen carriers M24Mg76 and M48Mg51 were selected for batch fluidized bed reactor testing showing good behavior with respect to the CLOU reactivity, and mechanical stability. One of the materials, the M24Mg76 showed activation during the experiments in the batch fluidized bed reactor experiments, increasing the oxygen transport capacity by 20 % during the experiment. However, 10 vol% of O2 was needed to regenerate both oxygen carriers at 850 \ub0C. No agglomeration tendencies were seen, and the attrition rate was low, obtaining high-extrapolated lifetime values. The fact that highly reactive oxygen carriers can be made with cheap and highly available metals oxides, i.e. Mn and Mg, makes this system very promising and a possible alternative to benchmark Cu-based CLOU materials

Nos el Dr. Don José Adanez Orduña, dignidad tesorero, canónigo magistral de la Santa Iglesia Catedral, y gobernador eclesiástico de esta ciudad y obispado de León, por el excmo. e ilmo. señor don Joaquín Abarca, obispo de la misma, consejero de estado de S. M. &c. &c. a vos, Ilmo. deam y cabildo de esta Santa Iglesia, a vos los arciprestes, vicarios de la dignidad episcopal ...

Copia digital. Madrid : Ministerio de Cultura. Subdirección General de Coordinación Bibliotecaria, 200

Characteristics of Copper-based Oxygen Carriers Supported on Calcium Aluminates for Chemical-Looping Combustion with Oxygen Uncoupling (CLOU)

Eight different oxygen carriers (OC) containing CuO (60 wt %) and different mass ratios of CaO to Al2O3 as the support were synthesized by wet-mixing followed by calcination at 1000 °C. The method of synthesis used involved the formation of calcium aluminum hydrate phases and ensured homogeneous mixing of the Ca2+ and Al3+ ions in the support at the molecular level. The performance of the OCs for up to 100 cycles of reduction and oxidation was evaluated in both a thermogravimetric analyzer (TGA) and a fluidized bed reactor, covering a temperature range of 800 to 950 °C. In these cycling experiments, complete conversion of the OC, from CuO to Cu and vice versa, was always achieved for all OCs. The reactivity of the materials was so high that no deactivation could be observed in the TGA, owing to mass transfer limitations. It was found that OCs prepared with a mass ratio of CaO to Al2O3 in the support >0.55 agglomerated in the fluidized bed, resulting in an apparent deactivation over 25 cycles for all temperatures investigated. High ratios of mass of CaO to Al2O3 in the support resulted in CuO interacting with CaO, forming mixed oxides that have low melting temperatures, and this explains the tendency of these materials to agglomerate. This behavior was not observed when the mass ratio of CaO to Al2O3 in the support was ≤0.55 and such materials showed excellent cyclic stability operating under redox conditions at temperatures as high as 950 °C.The authors thank Mohammad Ismail and Matthew Dunstan for helping with the XRD analysis and Alex Casabuena-Rodriguez and for helping with the SEM. This work was supported by the Engineering and Physical Sciences Research Council (EPSRC grant EP/I010912/1).This is the final version of the article. It first appeared from ACS via http://dx.doi.org/10.1021/acs.iecr.5b0117

Assessing Models using Monte Carlo Simulations

We establish a framework for assessing the validity of a given model using Monte Carlo simulations and inferences based on sampling distributions. Using this framework, we show that geometric brownian motion alone cannot generate a majority of the patterns in the distribution of stock returns and wealth creation. Our paper represents an often overlooked departure from the traditional way of validating asset pricing models, in which implications are derived, parameters calibrated, and magnitudes compared to empirical data. Instead, we seek to leverage the power of large numbers by conducting numerous simulations and assessing the probability that they contain our realized stock market

Numerical simulations of fluidization dynamics in a hot model of a CLC process

Chemical Looping Combustion (CLC) is one of the most promising alternatives for solid fuel combustion. CO2 concentration in the exhaust gas is high in CLC technology which enables high efficiency of CO2 capture from flue gas. The use of solid oxygen carriers is a characteristic feature of a CLC process. Oxygen carriers are mainly metal oxides which are characterized by high oxygen transfer capacity and high mechanical resistance. Since the CLC technology is not sufficiently recognized due to its complexity the development of models with real conditions of the CLC equipment is of practical significance. The paper presents numerical simulations of the dynamic fluidized bed for Chemical Looping Combustion using CeSFaMB software. The model was validated on the basis of the results obtained from experiments, which were carried out on the Fluidized-Bed Chemical-Looping-Combustion of Solid-Fuels (FB-CLC-SF) unit. The studies were conducted in air atmosphere at temperature of 850°C. The validation of the 1.5D model showed that the maximum relative error between experiment and simulations results does not exceed 12%

Reliable Transmission of MPEG-2 VBR Video Streams over New Network Adaptation and ATM Adaptation Layers

This paper adresses the transmission of VBR MPEG-2 video streams on top of both Network Adaptation (NAL) and ATM Adaptation Layers (AAL) for real-time multimedia applications. The NAL, specific to MPEG-2, provides a selective data protection mechanism based on syntactic criteria. The AAL provides a reliable transmission by applying per-cell sequence numbering combined with a selective Forward Error Correction (FEC) mechanism based on Burst Erasure codes. Studies carried out with Constant Bit Rate (CBR) video streams showed improvements in terms of network performance evaluated by the cell loss ratio (CLR) as well as in terms of user perceived quality compared to the performance obtained with AAL5 under the same network conditions. This paper proposes improvements at the NAL and presents the results obtained for the transmission of Variable Bit Rate (VBR) video streams. To evalute the impact of cell losses at the application level, we apply a perceptual quality measure to the decoded MPEG-2 sequences which allows us to evaluate performance at the user level