Molecular epidemiology of Plasmodium species prevalent in Yemen based on 18 s rRNA

<p>Abstract</p> <p>Background</p> <p>Malaria is an endemic disease in Yemen and is responsible for 4.9 deaths per 100,000 population per year and 43,000 disability adjusted life years lost. Although malaria in Yemen is caused mainly by <it>Plasmodium falciparum </it>and <it>Plasmodium vivax</it>, there are no sequence data available on the two species. This study was conducted to investigate the distribution of the <it>Plasmodium </it>species based on the molecular detection and to study the molecular phylogeny of these parasites.</p> <p>Methods</p> <p>Blood samples from 511 febrile patients were collected and a partial region of the 18 s ribosomal RNA (18 s rRNA) gene was amplified using nested PCR. From the 86 positive blood samples, 13 <it>Plasmodium falciparum </it>and 4 <it>Plasmodium vivax </it>were selected and underwent cloning and, subsequently, sequencing and the sequences were subjected to phylogenetic analysis using the neighbor-joining and maximum parsimony methods.</p> <p>Results</p> <p>Malaria was detected by PCR in 86 samples (16.8%). The majority of the single infections were caused by <it>P. falciparum </it>(80.3%), followed by <it>P. vivax </it>(5.8%). Mixed infection rates of <it>P. falciparum </it>+ <it>P. vivax </it>and <it>P. falciparum </it>+ <it>P. malariae </it>were 11.6% and 2.3%, respectively. All <it>P. falciparum </it>isolates were grouped with the strain 3D7, while <it>P. vivax </it>isolates were grouped with the strain Salvador1. Phylogenetic trees based on 18 s rRNA placed the <it>P. falciparum </it>isolates into three sub-clusters and <it>P. vivax </it>into one cluster. Sequence alignment analysis showed 5-14.8% SNP in the partial sequences of the 18 s rRNA of <it>P. falciparum</it>.</p> <p>Conclusions</p> <p>Although <it>P. falciparum </it>is predominant, <it>P. vivax</it>, <it>P. malariae </it>and mixed infections are more prevalent than has been revealed by microscopy. This overlooked distribution should be considered by malaria control strategy makers. The genetic polymorphisms warrant further investigation.</p

Application of Plackett-Burman Design for Spectrochemical Determination of the Last-Resort Antibiotic, Tigecycline, in Pure Form and in Pharmaceuticals: Investigation of Thermodynamics and Kinetics.

Tigecycline (TIGC) reacts with 7,7,8,8-tetracyanoquinodimethane (TCNQ) to form a bright green charge transfer complex (CTC). The spectrum of the CTC showed multiple charge transfer bands with a major peak at 843 nm. The Plackett-Burman design (PBD) was used to investigate the process variables with the objective being set to obtaining the maximum absorbance and thus sensitivity. Four variables, three of which were numerical (temperature-Temp; reagent volume-RV; reaction time-RT) and one non-numerical (diluting solvent-DS), were studied. The maximum absorbance was achieved using a factorial blend of Temp: 25 °C, RV: 0.50 mL, RT: 60 min, and acetonitrile (ACN) as a DS. The molecular composition that was investigated using Job's method showed a 1:1 CTC. The method's validation was performed following the International Conference of Harmonization (ICH) guidelines. The linearity was achieved over a range of 0.5-10 µg mL with the limits of detection (LOD) and quantification (LOQ) of 166 and 504 ng mL, respectively. The method was applicable to TIGC per se and in formulations without interferences from common additives. The application of the Benesi-Hildebrand equation revealed the formation of a stable complex with a standard Gibbs free energy change (∆) value of -26.42 to -27.95 kJ/mol. A study of the reaction kinetics revealed that the CTC formation could be best described using a pseudo-first-order reaction

Application of Infrared Spectroscopy in the Characterization of Lignocellulosic Biomasses Utilized in Wastewater Treatment

Global economies are confronting major energy challenges. Mitigating the energy depletion crisis and finding alternative and unconventional energy sources have been subjects for many investigations. Plant-sourced biomasses have started to attract global attention as a renewable energy source. Maximizing the performance of the biomass feedstock in different applications requires the availability of reliable and cost-effective techniques for characterization of the biomass. Comprehending the structure of lignocellulosic biomass is a very important way to assess the feasibility of bond formation and functionalization, structural architecture, and hence sculpting of the corresponding structure−property liaison. Over the past decades, non-invasive techniques have brought many pros that make them a valuable tool in depicting the structure of lignocellulosic materials. The current chapter will be focused on the applications of Fourier transform infrared (FTIR) spectroscopy especially in the mid-infrared region in the compositional and structural analysis of lignocellulosic biomasses. The chapter will provide a display of examples from the literature for the application of FTIR spectroscopy in finding the composition of various biomasses obtained from different parts of plants and applied for wastewater treatment. A comparison between biomasses and physically/chemically treated products will be discussed

Carbon-Based Materials (CBMs) for Determination and Remediation of Antimicrobials in Different Substrates: Wastewater and Infant Foods as Examples

The widespread use of antimicrobials within either a therapeutic or a veterinary rehearsal has resulted in a crisis on the long run. New strains of antimicrobial-resistant microorganisms have appeared. Contamination of water with pharmaceutically active materials is becoming a fact! and efficacy of wastewater treatment plants is a question. Adsorption is a promising technique for wastewater treatment. Carbon-based materials are among the most commonly used adsorbents for remediation purposes. Food production and commercialization are posing rigorous regulations. In this concern, almost all authoritarian societies are setting up standards for the maximum residue levels permissible in raw and processed food. Among these products is infant foods. The current trend is to use carbon-based and recycled from agricultural wastes, which can selectively remove target antimicrobials. Nanoparticles are among the most commonly used materials. With the enormous amount of data generated from an analytical process, there is a need for a powerful data processing technique. Factorial designs play an important role in not only minimalizing the number of experimental runs, and hence saving chemicals, resources, and reducing waste but also, they serve to improve the sensitivity and selectivity, the most important analytical outcomes

Entomological aspects and the role of human behaviour in malaria transmission in a highland region of the Republic of Yemen

© 2016 Al-Eryani et al. This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/ publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated. The attached file is the published version of the article

Synthesis and Application of Cobalt Oxide (Co3O4)-Impregnated Olive Stones Biochar for the Removal of Rifampicin and Tigecycline: Multivariate Controlled Performance

Cobalt oxide (Co3O4) nanoparticles supported on olive stone biochar (OSBC) was used as an efficient sorbent for rifampicin (RIFM) and tigecycline (TIGC) from wastewater. Thermal stabilities, morphologies, textures, and surface functionalities of two adsorbents; OSBC and Co-OSBC were compared. BET analysis indicated that Co-OSBC possesses a larger surface area (39.85 m2/g) and higher pore-volume compared to the pristine OSBC. FT-IR analysis showed the presence of critical functional groups on the surface of both adsorbents. SEM and EDX analyses showed the presence of both meso- and macropores and confirmed the presence of Co3O4 nanoparticles on the adsorbent surface. Batch adsorption studies were controlled using a two-level full-factorial design (2k-FFD). Adsorption efficiency of Co-OSBC was evaluated in terms of the % removal (%R) and the sorption capacity (qe, mg/g) as a function of four variables: pH, adsorbent dose (AD), drug concentration, and contact time (CT). A %R of 95.18% and 75.48% could be achieved for RIFM and TIGC, respectively. Equilibrium studies revealed that Langmuir model perfectly fit the adsorption of RIFM compared to Freundlich model for TIGC. Maximum adsorption capacity (qmax) for RIFM and TIGC was 61.10 and 25.94 mg/g, respectively. Adsorption kinetics of both drugs could be best represented using the pseudo-second order (PSO) model.This research was funded by Qatar University under the National Science Promotion Program, QUNSPP-(CAS)-2021-(108). The NSPP is managed by Qatar University Young Scientists Center (QUYSC), Doha, Qatar. The findings achieved herein are solely the responsibility of the author

Long term outcome of Video-Assisted Thoracoscopic Sympathectomy at thoracic level (R2-3) versus (R2-4) on Plantar Hyperhidrosis associated with Primary Palmar Hyperhidrosis

Background: Hyperhidrosis is unnecessary sweating afar the body needs for cooling down the body temperature. It affects nearly 2-3% of the population with equal gender predominance. Both medical and surgical interventions have been utilized to treat primary hyperhidrosis. Over 80% of patients with palmar hyperhidrosis (PH) also experience plantar hyperhidrosis (PLH). An interesting observation in surgically treated patients with PH is that PLH symptoms tend to decrease after undergoing Video-assisted thoracoscopic surgery (VATS). Objectives: The aim of the present study was to evaluate the efficacy, safety and drawbacks of VATS sympathectomy at thoracic levels (R2-3) versus (R2-4) on PLH associated with primary PH. Patients and methods: this single center, parallel randomized controlled study involved 72 eligible patients presented with primary palmoplantar hyperhidrosis, where 36 patients underwent VATS sympathectomy at thoracic levels R2-3 (Group A) versus other 36 patients at thoracic level R2-4 (Group B). Both groups underwent bilateral two-port tubeless VATS sympathectomy with the use of electrocautery under general anesthesia in semi-fowler position. Results: Following surgery, both groups showed improvement in PLH, but group B had a significantly higher incidence of improvement compared to group A. In group A, 77.7% of patients were satisfied, while in group B, 88.8% of patients reported satisfaction. Conclusion: VATS sympathectomy is the preferred treatment for effectively curing PH. There is a significant correlation between VATS sympathectomy performed at the R2 to R4 levels and the alleviation of PLH