275 research outputs found

    COMPARISON OF DRAINMOD BASED WATERSHED SCALE MODELS

    Get PDF
    Watershed scale hydrology and water quality models (DRAINMOD-DUFLOW, DRAINMOD-W, DRAINMOD-GIS and WATGIS) that describe the nitrogen loadings at the outlet of poorly drained watersheds were examined with respect to their accuracy and uncertainty in model predictions. Latin Hypercube Sampling (LHS) was applied to determine the impact of uncertainty in estimating field exports and decay coefficients on the uncertainty of the simulated nitrogen loads at the outlet of a 2950 ha coastal plain watershed in eastern North Carolina. Mean daily flow predictions were all within 1 % of the observed flows. Except for the WATGIS model, mean daily nitrate-nitrogen load predictions were within 2 % of the observed load. Statistical test indicated no difference between the predictions of the different models. Uncertainty analysis indicated that uncertainty in quantifying the field exports has greater impact on the uncertainty of outlet loads than does the uncertainty associated with decay coefficient. The uncertainty of predicted outputs from the DRAINMOD-GIS and WATGIS models are similar

    Leaf area index (LAI) of loblolly pine and emergent vegetation following a harvest. Trans

    Get PDF
    ABSTRACT. Forests provide goods and services to society and, often, refugia for plants and animals; forest managers utilize silviculture to provide ecosystem services and to create habitat. On the Coastal Plain of North Carolina, forest management objectives typically include wood fiber production but may also include the maintenance of environmental quality and, sometimes, species diversity. Silvicultural prescriptions alter stand structure and development trajectories by influencing the competitive interactions among plant species for site resources. Early site intervention may include nutrient additions and/or vegetation control; in coastal loblolly pine (Pinus taeda L.) stands, herbaceous and arborescent species can dominate the site leaf area index (LAI) for many years after a harvest (followed by planting). LAI is an important structural and functional component of a forest stand. Many eco‐hydrologic and water quality models do not accurately account for LAI as the process driver to evapotranspiration (ET), and thus they ignore the ecophysiological effects of LAI on site water balance and nutrient loading. We measured LAI of emergent vegetation following a harvest, mechanical site preparation, and then pine planting for a drained loblolly pine plantation in coastal North Carolina. For six years monthly, growing season estimates of LAI were obtained using a LI‐COR LAI 2000 Plant Canopy Analyzer (PCA) for control (D1), thinned (D3), and harvested (D2) watersheds. In this article, we present results from the D2 treatment. In D2, we “harvested ” all emergent vegetation in 18 randomly placed 1 m 2 clip plots for three growing seasons where we estimated LAI using species‐pooled estimates of specific leaf area and total leaf dry mass (i.e., LAICLIP); PCA measurements were recorded prior to clipping (LAIPCA). We als

    Long-term Shallow Groundwater Studies in the Coastal Plain: Opportunities and Challenges

    Get PDF
    2010 S.C. Water Resources Conference - Science and Policy Challenges for a Sustainable Futur

    Application of SWAT Hydrologic Model for TMDL Development on Chapel Branch Creek Watershed, SC

    Get PDF
    2008 S.C. Water Resources Conference - Addressing Water Challenges Facing the State and Regio

    Temporal Stability and the Effects of Training on Saccade Latency in “Express Saccade Makers”

    Get PDF
    The temporal stability of saccade latency, and the effects of training, particularly in “express saccade makers” (ESMs), has received little attention. ESMs are healthy, naïve, adults, who persist in executing very many low latency “express saccades” (ES; saccades with latency of 80 ms to 130 ms), in conditions designed to suppress such responses. We investigated the stability of ES production (%ES) in 59 ESM and 54 non-ESM participants in overlap tasks. Within a single session, the intraclass correlation coefficient (ICC) for %ES in two runs of 200 trials was 0.97 (p30% of saccades over the two runs were ES, were classified as ESMs. For 60 participants tested over two sessions 12 weeks apart, and 30 participants tested in three sessions over approximately six months, the ICC for %ES was uniformly high (0.95, p<0.001 and 0.97, p<0.001 respectively) and participants behaved consistently with their initial classification. Fourteen participants (7 ESMs) were then exposed to training consisting of either gap or overlap tasks. Training increased %ES in both groups. However, when tested in overlap tasks, it was not sufficient to transform Normal participants into ESMs. We conclude that the pattern of saccade behaviour exhibited by ESMs constitutes a stable and distinct oculomotor phenotype

    Application of SWAT Hydrologic Model for TMDL Development on Chapel Branch Creek Watershed, SC

    Get PDF
    2008 S.C. Water Resources Conference - Addressing Water Challenges Facing the State and Regio

    Hydrologic and Water Quality Monitoring on Turkey Creek Watershed, Francis Marion National Forest, SC

    Get PDF
    2008 S.C. Water Resources Conference - Addressing Water Challenges Facing the State and Regio

    Hydrologic and Water Quality Monitoring on Turkey Creek Watershed, Francis Marion National Forest, SC

    Get PDF
    2008 S.C. Water Resources Conference - Addressing Water Challenges Facing the State and Regio

    Micromechanical Properties of Injection-Molded Starch–Wood Particle Composites

    Get PDF
    The micromechanical properties of injection molded starch–wood particle composites were investigated as a function of particle content and humidity conditions. The composite materials were characterized by scanning electron microscopy and X-ray diffraction methods. The microhardness of the composites was shown to increase notably with the concentration of the wood particles. In addition,creep behavior under the indenter and temperature dependence were evaluated in terms of the independent contribution of the starch matrix and the wood microparticles to the hardness value. The influence of drying time on the density and weight uptake of the injection-molded composites was highlighted. The results revealed the role of the mechanism of water evaporation, showing that the dependence of water uptake and temperature was greater for the starch–wood composites than for the pure starch sample. Experiments performed during the drying process at 70°C indicated that the wood in the starch composites did not prevent water loss from the samples.Peer reviewe

    Cultural Diversity and Saccade Similarities: Culture Does Not Explain Saccade Latency Differences between Chinese and Caucasian Participants

    Get PDF
    A central claim of cultural neuroscience is that the culture to which an individual belongs plays a key role in shaping basic cognitive processes and behaviours, including eye movement behaviour. We previously reported a robust difference in saccade behaviour between Chinese and Caucasian participants; Chinese participants are much more likely to execute low latency express saccades, in circumstances in which these are normally discouraged. To assess the extent to which this is the product of culture we compared a group of 70 Chinese overseas students (whose primary cultural exposure was that of mainland China), a group of 45 participants whose parents were Chinese but who themselves were brought up in the UK (whose primary cultural exposure was western European) and a group of 70 Caucasian participants. Results from the Schwartz Value Survey confirmed that the UK-Chinese group were culturally similar to the Caucasian group. However, their patterns of saccade latency were identical to the mainland Chinese group, and different to the Caucasian group. We conclude that at least for the relatively simple reflexive saccade behaviour we have investigated, culture cannot explain the observed differences in behaviour
    corecore