Determination of ball bearing dynamic stiffness

The dynamic radial stiffness characteristics of rolling element bearings are currently determined by analytical methods that have not been experimentally verified. These bearing data are vital to rotating machinery design integrity because accurate critical speeds and rotor stability predictions are highly dependent on the bearing stiffness. A tester was designed capable of controlling the bearing axial preload, speed, and rotor unbalance. The rotor and support structures were constructed to permit critical speeds that are predominantly determined by a 57 mm test bearing. A curve of calculated critical speed versus stiffness was used to determine the actual bearing stiffness from the empirical data. The results of extensive testing are used to verify analytical predictions, increase confidence in existing bearing computer programs, and to serve as a data base for efforts to correct these programs

Optical and holographic storage properties of F3, Cu, and Mg-doped lithium niobate

Several samples of iron, copper, and magnesium doped lithium niobate were tested to determine their storage properties which would be applicable to an optical data storage system and an integrated optics data preprocessor which makes use of holographic storage techniques. The parameters of interest were the diffraction efficiency, write power, write time, erase time, erase energy, and write sensitivity. Results of these parameters are presented. It was found that iron doped lithium niobate samples yielded the best results in all parameters except for a few percent higher diffraction efficiency in copper doped samples. The magnesium doped samples were extremely insensitive and are not recommended for use in holographic optical data storage and processing systems

Consumer Surplus Estimates and the Source of Regression Error

Contrary to widely held belief, we show that the source of regression error does not matter when calculating Marshallian surplus. A misspecified demand curve, not the assumed source of regression error, leads to differences in estimates of consumer surplus.Regression Error, Marshallian Surplus, Welfare Analysis, Consumer/Household Economics, D60, C24, Q51,

Housing flexibility effects on rotor stability

Preliminary rotordynamic evaluations are performed with a housing stiffness assumption that is typically determined only after the hardware is built. In addressing rotor stability, a rigid housing assumption was shown to predict an instability at a lower spin speed than a comparable flexible housing analysis. This rigid housing assumption therefore provides a conservative estimate of the stability threshold speed. A flexible housing appears to act as an energy absorber and dissipated some of the destabilizing force. The fact that a flexible housing is usually asymmetric and considerably heavier than the rotor was related to this apparent increase in rotor stability. Rigid housing analysis is proposed as a valuable screening criteria and may save time and money in construction of elaborate housing finite element models for linear stability analyses

Mercury advisories: Information, education, and fish consumption

This paper examines responses to a national FDA advisory that urged at-risk individuals to limit store-bought fish consumption due to the dangers of methyl-mercury. We investigate consumer response using both parametric and nonparametric methods. Some targeted consumers significantly reduced canned fish purchases as a result of the advisory, suggesting that information-based policies can achieve the issuing agency’s goals. Education and newspaper readership were important determinants of response, suggesting that information acquisition and assimilation are key factors for risk avoidance. While some groups reduced consumption as a result of the advisory, we do not find a response among the relatively large group of at-risk households which met neither the education nor readership criteria. The advisory also had unintended spillover effects; some consumers not considered at-risk reduced consumption in response to the advisory.mercury; health information; health advisory; environmental health; fish consumption; children’s health; environmental risk; pollution;

Nuclear reactor power as applied to a space-based radar mission

The SP-100 Project was established to develop and demonstrate feasibility of a space reactor power system (SRPS) at power levels of 10's of kilowatts to a megawatt. To help determine systems requirements for the SRPS, a mission and spacecraft were examined which utilize this power system for a space-based radar to observe moving objects. Aspects of the mission and spacecraft bearing on the power system were the primary objectives of this study; performance of the radar itself was not within the scope. The study was carried out by the Systems Design Audit Team of the SP-100 Project

Are Mercury Advisories Effective? Information, Education, and Fish Consumption

This paper examines responses to a national FDA advisory urging at-risk individuals to limit store-bought fish consumption due to the dangers of methyl-mercury. We address this issue using parametric and nonparametric methods, including recently developed tests of stochastic dominance. Both education and newspaper readership were important determinants of consumption response, suggesting that information acquisition and assimilation are key factors for risk avoidance. While the advisory was effective for some groups, we do not find a response among the relatively large group of at-risk households which met neither the education nor readership criteria.

Spitzer Phase Curves of KELT-1b and the Signatures of Nightside Clouds in Thermal Phase Observations

We observed two full orbital phase curves of the transiting brown dwarf KELT-1b, at 3.6um and 4.5um, using the Spitzer Space Telescope. Combined with previous eclipse data from Beatty et al. (2014), we strongly detect KELT-1b's phase variation as a single sinusoid in both bands, with amplitudes of $964\pm36$ ppm at 3.6um and $979\pm54$ ppm at 4.5um, and confirm the secondary eclipse depths measured by Beatty et al. (2014). We also measure noticeable Eastward hotspot offsets of $28.4\pm3.5$ degrees at 3.6um and $18.6\pm5.2$ degrees at 4.5um. Both the day-night temperature contrasts and the hotspot offsets we measure are in line with the trends seen in hot Jupiters (e.g., Crossfield 2015), though we disagree with the recent suggestion of an offset trend by Zhang et al. (2018). Using an ensemble analysis of Spitzer phase curves, we argue that nightside clouds are playing a noticeable role in modulating the thermal emission from these objects, based on: 1) the lack of a clear trend in phase offsets with equilibrium temperature, 2) the sharp day-night transitions required to have non-negative intensity maps, which also resolves the inversion issues raised by Keating & Cowan (2017), 3) the fact that all the nightsides of these objects appear to be at roughly the same temperature of 1000K, while the dayside temperatures increase linearly with equilibrium temperature, and 4) the trajectories of these objects on a Spitzer color-magnitude diagram, which suggest colors only explainable via nightside clouds.Comment: AJ in press. Updated to reflect the accepted versio