The role of small specimen creep testing within a life assessment framework for high temperature power plant

The safe operation of components operating at high temperature and pressure faces numerous challenges associated with ageing materials and maintaining commercial viability whilst economies transition to a lower carbon future as part of their climate change commitments. Due to these challenges the plant operator faces increasing pressure to ensure that any capital or operational expenditures are optimised and must ensure that they duly recognise plant age, condition, operating regime and ultimately the planned closure date. This review, for the first time, describes how small specimen creep testing can be applied within a practical and deployable life assessment framework and in conjunction with other assessment techniques. The current state of the art for small specimen creep testing is critically reviewed; this also includes a review of traditional techniques used on site for the metallurgical assessment of material condition, with examples from site investigations and assessment campaigns in both conventional and nuclear plant applications. In order to enhance the current practice for assessing the condition of creep ageing components this review proposes the more proactive use of small specimen testing methods for the in-service condition assessment of power plant materials, notably earlier in the plant lifecycle and within a holistic life assessment framework. This is intended to provide a means of calibrating the time dependent response of the component or system being monitored, thereby providing a key reference in-service strain rate measurement, or material property evaluation, that can subsequently be used with other traditionally deployed assessment methods to define a more targeted and cost-effective forward inspection plan. The review describes how small specimen creep testing methods and other complementary tools can be use in a new and structured approach to life management. The current status of small specimen testing methods, for both conventional and nuclear applications, is described along with a detailed discussion on current practice for in-service creep life assessment, with a case study used to illustrate the main principals. A case study is presented for ageing CMV (0.5%Cr0.5%Mo0.25%V) main steam pipework due to the extensive amount of through life data available, which highlights the particular challenges associated with the interpretation of various types of site outage inspection data, in conjunction with on-load plant operational data. The current approach to the assessment of component condition follows well established inspection based practices defined in various industry good practice guides, with expert elicitation and experience used to judge the condition of the component, system and operational risk on return to service. This review proposes a new approach to the holistic life assessment of high temperature plant, with a particular emphasis on more proactive use of small specimen testing. In addition, the review has highlighted other aspects of the current approach to in-service condition assessment that could be improved to support the plant owner. This specifically refers to the potential to develop and implement novel life assessment models that can take advantage of the significant amount of site data currently routinely acquired during plant outage overhauls. There is a clear need to provide the plant owner with more reliable and effective life prediction tools, based on earlier and more rigorous assessment of life consumption. The proposed application of small specimen testing described in this paper is equally applicable to both conventional and nuclear plant applications and a range of components, from static pressure systems to high temperature turbine rotors

Fast solitons on star graphs

We define the Schr\"odinger equation with focusing, cubic nonlinearity on one-vertex graphs. We prove global well-posedness in the energy domain and conservation laws for some self-adjoint boundary conditions at the vertex, i.e. Kirchhoff boundary condition and the so called $\delta$ and $\delta'$ boundary conditions. Moreover, in the same setting we study the collision of a fast solitary wave with the vertex and we show that it splits in reflected and transmitted components. The outgoing waves preserve a soliton character over a time which depends on the logarithm of the velocity of the ingoing solitary wave. Over the same timescale the reflection and transmission coefficients of the outgoing waves coincide with the corresponding coefficients of the linear problem. In the analysis of the problem we follow ideas borrowed from the seminal paper \cite{[HMZ07]} about scattering of fast solitons by a delta interaction on the line, by Holmer, Marzuola and Zworski; the present paper represents an extension of their work to the case of graphs and, as a byproduct, it shows how to extend the analysis of soliton scattering by other point interactions on the line, interpreted as a degenerate graph.Comment: Sec. 2 revised; several misprints corrected; added references; 32 page

On the Asymptotic Dynamics of a Quantum System Composed by Heavy and Light Particles

We consider a non relativistic quantum system consisting of $K$ heavy and $N$ light particles in dimension three, where each heavy particle interacts with the light ones via a two-body potential $\alpha V$. No interaction is assumed among particles of the same kind. Choosing an initial state in a product form and assuming $\alpha$ sufficiently small we characterize the asymptotic dynamics of the system in the limit of small mass ratio, with an explicit control of the error. In the case K=1 the result is extended to arbitrary $\alpha$. The proof relies on a perturbative analysis and exploits a generalized version of the standard dispersive estimates for the Schr\"{o}dinger group. Exploiting the asymptotic formula, it is also outlined an application to the problem of the decoherence effect produced on a heavy particle by the interaction with the light ones.Comment: 38 page

An evaluation of the capability of data conversion of impression creep test

High temperature power plant components are now working far beyond their operative designed life. Establishing their in-service material properties has become a matter of significant concern for power generation companies. Advantages for the assessment of creep material properties may come from miniature specimen creep testing techniques, like impression creep testing method, which can be treated as a quasistatic non-destructive technique and requires a small volume of material that can be scooped from in-service critical components, and can produce reliable secondary creep data. This paper presents an overview of impression creep testing method to highlight the capability in determining the minimum creep strain rate data by use of conversion relationships that relates uniaxial creep test data and impression creep test data. Stepped-load and stepped-temperature impression creep tests are also briefly described. Furthermore, the paper presents some new impression creep test data and their correlation with uniaxial data, obtained from P91, P92 and ½CrMoV steels at different stresses and temperatures. The presented data, in terms of creep strain rate against the reference uniaxial stress, are useful for calibration of impression creep testing technique and provide further comparative results for the evaluation of the reliability of the method in determining secondary creep properties

Controlling a resonant transmission across the δ′\delta'-potential: the inverse problem

Recently, the non-zero transmission of a quantum particle through the one-dimensional singular potential given in the form of the derivative of Dirac's delta function, $\lambda \delta'(x)$, with $\lambda \in \R$, being a potential strength constant, has been discussed by several authors. The transmission occurs at certain discrete values of $\lambda$ forming a resonance set ${\lambda_n}_{n=1}^\infty$. For $\lambda \notin {\lambda_n}_{n=1}^\infty$ this potential has been shown to be a perfectly reflecting wall. However, this resonant transmission takes place only in the case when the regularization of the distribution $\delta'(x)$ is constructed in a specific way. Otherwise, the $\delta'$-potential is fully non-transparent. Moreover, when the transmission is non-zero, the structure of a resonant set depends on a regularizing sequence $\Delta'_\varepsilon(x)$ that tends to $\delta'(x)$ in the sense of distributions as $\varepsilon \to 0$. Therefore, from a practical point of view, it would be interesting to have an inverse solution, i.e. for a given $\bar{\lambda} \in \R$ to construct such a regularizing sequence $\Delta'_\varepsilon(x)$ that the $\delta'$-potential at this value is transparent. If such a procedure is possible, then this value $\bar{\lambda}$ has to belong to a corresponding resonance set. The present paper is devoted to solving this problem and, as a result, the family of regularizing sequences is constructed by tuning adjustable parameters in the equations that provide a resonance transmission across the $\delta'$-potential.Comment: 21 pages, 4 figures. Corrections to the published version added; http://iopscience.iop.org/1751-8121/44/37/37530

Experimental and numerical analysis of initial plasticity in P91 steel small punch creep samples

To date, the complex behaviour of small punch creep test (SPCT) specimens has not been completely understood, making the test hard to numerically model and the data difficult to interpret. This paper presents a novel numerical model able to generate results that match the experimental findings. For the first time, pre-strained uniaxial creep test data of a P91 steel at 600 °C have been implemented in a conveniently modified Liu and Murakami creep damage model in order to simulate the effects of the initial localised plasticity on the subsequent creep response of a small punch creep test specimen. Finite element (FE) results, in terms of creep displacement rate and time to failure, obtained by the modified Liu and Murakami model are in good agreement with experimental small punch creep test data. The rupture times obtained by the FE calculations which make use of the non-modified creep damage model are one order of magnitude shorter than those obtained by using the modified constitutive model. Although further investigation is needed, this novel approach has confirmed that the effects of initial localised plasticity, taking place in the early stages of small punch creep test, cannot be neglected. The new results, obtained by using the modified constitutive model, show a significant improvement with respect to those obtained by a state of the art creep damage constitutive model (the Liu and Murakami constitutive model) both in terms of minimum load-line displacement rate and time to rupture. The new modelling method will potentially lead to improved capability for SPCT data interpretatio

Integrated Care for Chronic Diseases – State of the Art

Chronic diseases represent a high cost for healthcare systems, for individuals, families, businesses and governments. The World Health Organization (WHO) estimates that an increase of 10% of chronic diseases is associated with a reduction of 0.5% of annual economic growth. Primary care has proven to ensure high levels of efficiency, effectiveness, equity, safety, timely and centrality of the patient achieving better health outcomes and lower costs. The Chronic Care Model (CCM) proposes a proactive approach in assisting the empowerment of patients and their community. The CCM contributes to improving the quality of care and health outcomes and the reduction of inequalities (e.g., ethnicity, social status) too

Cold atom Clocks and Applications

This paper describes advances in microwave frequency standards using laser-cooled atoms at BNM-SYRTE. First, recent improvements of the $^{133}$Cs and $^{87}$Rb atomic fountains are described. Thanks to the routine use of a cryogenic sapphire oscillator as an ultra-stable local frequency reference, a fountain frequency instability of $1.6\times 10^{-14}\tau^{-1/2}$ where $\tau$ is the measurement time in seconds is measured. The second advance is a powerful method to control the frequency shift due to cold collisions. These two advances lead to a frequency stability of $2\times 10^{-16}$ at $50,000s for the first time for primary standards. In addition, these clocks realize the SI second with an accuracy of$7\times 10^{-16}$, one order of magnitude below that of uncooled devices. In a second part, we describe tests of possible variations of fundamental constants using$^{87}$Rb and$^{133}$Cs fountains. Finally we give an update on the cold atom space clock PHARAO developed in collaboration with CNES. This clock is one of the main instruments of the ACES/ESA mission which is scheduled to fly on board the International Space Station in 2008, enabling a new generation of relativity tests.Comment: 30 pages, 11 figure

Evidence That Skeletal Muscles Modulate HDL-Cholesterol in Metabolic Healthy Young Adults

: The aim of this study was to investigate whether skeletal muscle (SM) mass correlates with plasma lipids in metabolic healthy young adults. The study was designed as a retrospective observational monocentric study. Data on plasma lipids and SM mass of subjects attending our institution from 1999 to 2014 were analyzed. Inclusion criteria were being 18-45 years old and in apparently good health. SM mass was evaluated by bioelectrical impedance analysis (BIA) using the equation proposed by Janssen and normalized to height as skeletal muscle index (SMI: SM mass/height2). The association between SMI and plasma lipids levels was examined using a crude and adjusted linear regression model including age, sex, BMI and waist circumference as additional covariates. The study population consisted of 450 subjects (273 females) without metabolic syndrome (12.2% with normal body weight, 33.1% overweight, and 54.7% with obesity). SMI, total-cholesterol, LDL-cholesterol, and Triglycerides were higher, whereas HDL-cholesterol was lower in overweight and obese patients as compared with normal weight subjects. SMI was inversely associated with HDL-cholesterol in female patients with obesity but not in male patients with obesity, in normal- or over-weight subjects (p < 0.05). These results suggest that changes in SM mass occurring in obesity could have a role in worsening lipid profile with special reference to HDL-cholesterol

A Close Relationship Between Ultra-Processed Foods and Adiposity in Adults in Southern Italy

Background/objectives: One of the main culprits of the obesity epidemic is the obesogenic food environment, which promotes the consumption of ultra-processed foods (UPFs) that are highly palatable, have low nutritional quality and a high caloric impact and are economical and ready to use. This monocentric retrospective study explored the association between UPFs, obesity and adiposity measurements among adults living with obesity in Southern Italy. Methods: According to their Body Mass Index (BMI) values, 175 participants (63M) were recruited and stratified into three groups. To evaluate their usual eating habits, PREDIMED and the Nova Food Frequency Questionnaire (NFFQ) were administered to investigate Mediterranean diet (MD) adherence and UPF consumption. Anthropometric and biochemical measurements, body composition, as well as visceral obesity indices were collected. Results: The data showed an increase in UPF consumption as the BMI increased, with a concomitant decrease in MD adherence. Soft drinks were the most representative UPF in all groups, and we observed a significant increase in such consumption as the BMI increased. In addition, in the highest tertile of UPF consumption, there was an increase in adiposity indices. Conclusions: Our data suggest that high UPF consumption correlates with an increased BMI and visceral adiposity, and it is a predictive risk factor for the occurrence of non-communicable diseases