2,158 research outputs found

    Frequency and power dependence of spin-current emission by spin pumping in a thin film YIG/Pt system

    Get PDF
    This paper presents the frequency dependence of the spin current emission in a hybrid ferrimagnetic insulator/normal metal system. The system is based on a ferrimagnetic insulating thin film of Yttrium Iron Garnet (YIG, 200 nm) grown by liquid-phase-epitaxy (LPE) coupled with a normal metal with a strong spin-orbit coupling (Pt, 15 nm). The YIG layer presents an isotropic behaviour of the magnetization in the plane, a small linewidth, and a roughness lower than 0.4 nm. Here we discuss how the voltage signal from the spin current detector depends on the frequency [0.6 - 7 GHz], the microwave power, Pin, [1 - 70 mW], and the in-plane static magnetic field. A strong enhancement of the spin current emission is observed at low frequencies, showing the appearance of non-linear phenomena.Comment: 7 pages, 5 figure

    High Precision CTE-Measurement of SiC-100 for Cryogenic Space-Telescopes

    Full text link
    We present the results of high precision measurements of the thermal expansion of the sintered SiC, SiC-100, intended for use in cryogenic space-telescopes, in which minimization of thermal deformation of the mirror is critical and precise information of the thermal expansion is needed for the telescope design. The temperature range of the measurements extends from room temperature down to \sim 10 K. Three samples, #1, #2, and #3 were manufactured from blocks of SiC produced in different lots. The thermal expansion of the samples was measured with a cryogenic dilatometer, consisting of a laser interferometer, a cryostat, and a mechanical cooler. The typical thermal expansion curve is presented using the 8th order polynomial of the temperature. For the three samples, the coefficients of thermal expansion (CTE), \bar{\alpha}_{#1}, \bar{\alpha}_{#2}, and \bar{\alpha}_{#3} were derived for temperatures between 293 K and 10 K. The average and the dispersion (1 σ\sigma rms) of these three CTEs are 0.816 and 0.002 (×106\times 10^{-6}/K), respectively. No significant difference was detected in the CTE of the three samples from the different lots. Neither inhomogeneity nor anisotropy of the CTE was observed. Based on the obtained CTE dispersion, we performed an finite-element-method (FEM) analysis of the thermal deformation of a 3.5 m diameter cryogenic mirror made of six SiC-100 segments. It was shown that the present CTE measurement has a sufficient accuracy well enough for the design of the 3.5 m cryogenic infrared telescope mission, the Space Infrared telescope for Cosmology and Astrophysics (SPICA).Comment: in press, PASP. 21 pages, 4 figure

    Systematics of g factors of 2_1^+ states in even-even nuclei from Gd to Pt: A microscopic description by the projected shell model

    Full text link
    The systematics of g factor of first excited 2^+ state vs neutron number N is studied by the projected shell model. The study covers the even-even nuclei of all isotopic chains from Gd to Pt. g factors are calculated by using the many-body wavefunctions that reproduces well the energy levels and B(E2)'s of the ground-state bands. For Gd to W isotopes the characteristic feature of the g factor data along an isotopic chain is described by the present model. Deficiency of the model in the g factor description for the heavier Os and Pt isotopes is discussed.Comment: 9 pages, 5 figure

    An overview of farming system typology methodologies and its use in the study of pasture-based farming system: a review

    Get PDF
    The main objective of the paper is to do a critic study of the use of typology methodologies within pasture-based farming systems (PBFS), especially those situated in less favoured areas, showing in each case the more relevant variables or indicators determining the farming system classification. Another objective is to do an overview of the most used farming system typology methodologies in general. First some considerations about the concept of farming system and approaches to its study have been done. Next, the farming system typology methodologies have been showed in general to different farming systems, but addressed preferably to PBFS. The different tools integrated in these methodologies have been considered: sampling methods, sources of data, variables or indicators obtained from available data and techniques of analysis (statistical or not). Methods for farming system classification have been presented (expert methods, analytical methods or a combination of both types). Among the statistical methods, the multivariate analysis has been overall treated, including the principal component analysis and the cluster analysis. Finally, the use of farming system typology methodologies on different pasture-based farming systems has been presented. The most important aspects considered are following: the main objective of the typology, the main animal species, the employed methods of classification and the main variables involved in this classification

    Shell-Model Effective Operators for Muon Capture in ^{20}Ne

    Get PDF
    It has been proposed that the discrepancy between the partially-conserved axial-current prediction and the nuclear shell-model calculations of the ratio CP/CAC_P/C_A in the muon-capture reactions can be solved in the case of ^{28}Si by introducing effective transition operators. Recently there has been experimental interest in measuring the needed angular correlations also in ^{20}Ne. Inspired by this, we have performed a shell-model analysis employing effective transition operators in the shell-model formalism for the transition 20Ne(0g.s.+)+μ20F(1+;1.057MeV)+νμ^{20}Ne(0^+_{g.s.})+\mu^- \to ^{20}F(1^+; 1.057 MeV) + \nu_\mu. Comparison of the calculated capture rates with existing data supports the use of effective transition operators. Based on our calculations, as soon as the experimental anisotropy data becomes available, the limits for the ratio CP/CAC_P/ C_A can be extracted.Comment: 9 pages, 3 figures include

    Dominant g(9/2)^2 neutron configuration in the 4+1 state of 68Zn based on new g factor measurements

    Full text link
    The gg factor of the 41+4_1^+ state in 68^{68}Zn has been remeasured with improved energy resolution of the detectors used. The value obtained is consistent with the previous result of a negative gg factor thus confirming the dominant 0g9/20g_{9/2} neutron nature of the 41+4_1^+ state. In addition, the accuracy of the gg factors of the 21+2_1^+, 22+2_2^+ and 313_1^- states has been improved an d their lifetimes were well reproduced. New large-scale shell model calculations based on a 56^{56}Ni core and an 0f5/21pg9/20f_{5/2}1pg_{9/2} model space yield a theoretical value, g(41+)=+0.008g(4_1^+) = +0.008. Although the calculated value is small, it cannot fully explain the experimental value, g(41+)=0.37(17)g(4_1^+) = -0.37(17). The magnitude of the deduced B(E2) of the 41+4_1^+ and 21+2_1^+ transition is, however, rather well described. These results demonstrate again the importance of gg factor measurements for nuclear structure determination s due to their specific sensitivity to detailed proton and neutron components in the nuclear wave functions.Comment: 7 pages, 3 figs, submitted to PL

    Statistical Theory of Parity Nonconservation in Compound Nuclei

    Get PDF
    We present the first application of statistical spectroscopy to study the root-mean-square value of the parity nonconserving (PNC) interaction matrix element M determined experimentally by scattering longitudinally polarized neutrons from compound nuclei. Our effective PNC interaction consists of a standard two-body meson-exchange piece and a doorway term to account for spin-flip excitations. Strength functions are calculated using realistic single-particle energies and a residual strong interaction adjusted to fit the experimental density of states for the targets, ^{238} U for A\sim 230 and ^{104,105,106,108} Pd for A\sim 100. Using the standard Desplanques, Donoghue, and Holstein estimates of the weak PNC meson-nucleon coupling constants, we find that M is about a factor of 3 smaller than the experimental value for ^{238} U and about a factor of 1.7 smaller for Pd. The significance of this result for refining the empirical determination of the weak coupling constants is discussed.Comment: Latex file, no Fig

    49Cr: Towards full spectroscopy up to 4 MeV

    Full text link
    The nucleus 49Cr has been studied analysing gamma-gamma coincidences in the reaction 46Ti(alpha,n)49Cr at the bombarding energy of 12 MeV. The level scheme has been greatly extended at low excitation energy and several new lifetimes have been determined by means of the Doppler Shift Attenuation Method. Shell model calculations in the full pf configuration space reproduce well negative-parity levels. Satisfactory agreement is obtained for positive parity levels by extending the configuration space to include a nucleon-hole either in the 1d3/2 or in the 2s1/2 orbitals. A nearly one-to-one correspondence is found between experimental and theoretical levels up to an excitation energy of 4 MeV. Experimental data and shell model calculations are interpreted in terms of the Nilsson diagram and the particle-rotor model, showing the strongly coupled nature of the bands in this prolate nucleus. Nine values of K(pi) are proposed for the levels observed in this experiment. As a by-result it is shown that the values of the experimental magnetic moments in 1f7/2 nuclei are well reproduced without quenching the nucleon g-factors.Comment: 13 pages, 8 figure
    corecore