478 research outputs found

    Spectral Decomposition of Broad-Line AGNs and Host Galaxies

    Full text link
    Using an eigenspectrum decomposition technique, we separate the host galaxy from the broad line active galactic nucleus (AGN) in a set of 4666 spectra from the Sloan Digital Sky Survey (SDSS), from redshifts near zero up to about 0.75. The decomposition technique uses separate sets of galaxy and quasar eigenspectra to efficiently and reliably separate the AGN and host spectroscopic components. The technique accurately reproduces the host galaxy spectrum, its contributing fraction, and its classification. We show how the accuracy of the decomposition depends upon S/N, host galaxy fraction, and the galaxy class. Based on the eigencoefficients, the sample of SDSS broad-line AGN host galaxies spans a wide range of spectral types, but the distribution differs significantly from inactive galaxies. In particular, post-starburst activity appears to be much more common among AGN host galaxies. The luminosities of the hosts are much higher than expected for normal early-type galaxies, and their colors become increasingly bluer than early-type galaxies with increasing host luminosity. Most of the AGNs with detected hosts are emitting at between 1% and 10% of their estimated Eddington luminosities, but the sensitivity of the technique usually does not extend to the Eddington limit. There are mild correlations among the AGN and host galaxy eigencoefficients, possibly indicating a link between recent star formation and the onset of AGN activity. The catalog of spectral reconstruction parameters is available as an electronic table.Comment: 18 pages; accepted for publication in A

    Performance of the GLAS Space Lidar Receiver Through Its Seven-Year Space Mission

    Get PDF
    NASA s Ice, Cloud, and land Elevation Satellite (ICESat) mission [1,2] carrying the Geoscience Laser Altimeter System (GLAS) Instrument, was launched on January 12, 2003. The three lasers on ICESat have made a total of 1.98 billion laser shot measurements of the Earth s surface and atmosphere during its 17 science data collection campaigns over its seven year operating lifetime. ICESat completed its science mission after the last laser stopped operating in October 2009. The spacecraft was de-orbited on August 30, 2010. The GLAS instrument carried 3 diode-pumped Q-switched Nd:YAG lasers, which emitted 6-nsec wide pulses at 1064 and 532 nm at a 40-Hz rate. There are three lidar receiver channels, a 1064 nm surface altimetry channel, a 1064 nm cloud backscattering lidar channel, and a 532 nm cloud and aerosol backscattering lidar channel. The altimetry and cloud backscatter channels used Si avalanche photodiode (APD) operated in analog mode as in the Mars Global Surveyor s Mars Orbital Laser Altimeter [3,4]. GLAS also utilized a number of new technologies and techniques for space lidar, including passively Q-switched diode-pumped Nd:YAG lasers, a 1-m diameter telescope, a temperature tuned etalon optical bandpass filter, Si APD single photon counting detectors, 1 Gsample/sec waveform digitizers, ultra stable clock oscillators, and digital signal processing and detection algorithms [5]. A global position system (GPS) receiver was used to provide the spacecraft position and epoch times. The ICESat mission provided a unique opportunity to monitor the lidar component performance in the space environment over a multi-year time period. We performed a number of engineering tests periodically to monitor the lidar receiver performance, including receiver sensitivity, timing precision, detector dark noise, etc. A series of engineering tests were also performed after the end of the science mission to evaluate the performance of the spare detector, oscillator, waveform digitizer, and GPS receiver. An experiment was conducted which pointed GLAS to Venus to test the receiver sensitivity to star light and to verify GLAS bore sight with respect to the spacecraft coordinate system. These tests provided unique data to assess the degradation and the rate of change of these key lidar components due to space radiation and aging. They also helped to validate new techniques to operate and calibrate future space lidars

    Constraints on the Compact Object Mass in the Eclipsing HMXB XMMU J013236.7+303228 in M33

    Get PDF
    We present optical spectroscopic measurements of the eclipsing High Mass X-ray Binary XMMU J013236.7+303228 in M33. Based on spectra taken at multiple epochs of the 1.73d binary orbital period we determine physical as well as orbital parameters for the donor star. We find the donor to be a B1.5IV sub-giant with effective temperature T=22,000-23,000 K. From the luminosity, temperature and known distance to M33 we derive a radius of R = 8.9 \pm 0.5 R_sun. From the radial--velocity measurements, we determine a velocity semi-amplitude of K_opt = 63 \pm 12 km/sec. Using the physical properties of the B-star determined from the optical spectrum, we estimate the star's mass to be M_opt = 11 \pm 1 M_sun. Based on the X-ray spectrum, the compact companion is likely a neutron star, although no pulsations have yet been detected. Using the spectroscopically derived B-star mass we find the neutron star companion mass to be M_X = 2.0 \pm 0.4 M_sun, consistent with the neutron star mass in the HMXB Vela X-1, but heavier than the canonical value of 1.4 M_sun found for many millisecond pulsars. We attempt to use as an additional constraint that the B star radius inferred from temperature, flux, and distance, should equate the Roche radius, since the system accretes by Roche lobe overflow. This leads to substantially larger masses, but from trying to apply the technique to known systems, we find that the masses are consistently overestimated. Attempting to account for that in our uncertainties, we derive M_X = 2.2^{+0.8}_{-0.6} M_sun and M_opt =13 \pm 4 M_sun. We conclude that precise constraints require detailed modeling of the shape of the Roche surface.Comment: 11 pages emulateapj, 9 figures, ApJ accepte

    Dust Reddening in SDSS Quasars

    Get PDF
    We explore the form of extragalactic reddening toward quasars using a sample of 9566 quasars with redshifts 0<z<2.2, and accurate optical colors from the Sloan Digital Sky Survey (SDSS). We confirm that dust reddening is the primary explanation for the red ``tail'' of the color distribution of SDSS quasars. Our fitting to 5-band photometry normalized by the modal quasar color as a function of redshift shows that this ``tail'' is well described by SMC-like reddening but not by LMC-like, Galactic, or Gaskell et al. (2004) reddening. Extension to longer wavelengths using a subset of 1886 SDSS-2MASS matches confirms these results at high significance. We carry out Monte-Carlo simulations that match the observed distribution of quasar spectral energy distributions using a Lorentzian dust reddening distribution; 2% of quasars selected by the main SDSS targeting algorithm (i.e., which are not extincted out of the sample) have E_{B-V} > 0.1; less than 1% have E_{B-V} > 0.2, where the extinction is relative to quasars with modal colors. Reddening is uncorrelated with the presence of intervening narrow-line absorption systems, but reddened quasars are much more likely to show narrow absorption at the redshift of the quasar than are unreddened quasars. Thus the reddening towards quasars is dominated by SMC-like dust at the quasar redshift.Comment: 29 pages including 8 figures. AJ, September 2004 issu

    Spectral Energy Distributions and Multiwavelength Selection of Type 1 Quasars

    Get PDF
    We present an analysis of the mid-infrared (MIR) and optical properties of type 1 (broad-line) quasars detected by the Spitzer Space Telescope. The MIR color-redshift relation is characterized to z ~ 3, with predictions to z = 7. We demonstrate how combining MIR and optical colors can yield even more efficient selection of active galactic nuclei (AGNs) than MIR or optical colors alone. Composite spectral energy distributions (SEDs) are constructed for 259 quasars with both Sloan Digital Sky Survey and Spitzer photometry, supplemented by near-IR, GALEX, VLA, and ROSAT data, where available. We discuss how the spectral diversity of quasars influences the determination of bolometric luminosities and accretion rates; assuming the mean SED can lead to errors as large as 50% for individual quasars when inferring a bolometric luminosity from an optical luminosity. Finally, we show that careful consideration of the shape of the mean quasar SED and its redshift dependence leads to a lower estimate of the fraction of reddened/obscured AGNs missed by optical surveys as compared to estimates derived from a single mean MIR to optical flux ratio

    Testing stellar population synthesis models with Sloan Digital Sky Survey colors of M31's globular clusters

    Full text link
    Accurate stellar population synthesis models are vital in understanding the properties and formation histories of galaxies. In order to calibrate and test the reliability of these models, they are often compared with observations of star clusters. However, relatively little work has compared these models in the ugriz filters, despite the recent widespread use of this filter set. In this paper, we compare the integrated colors of globular clusters in the Sloan Digital Sky Survey (SDSS) with those predicted from commonly used simple stellar population (SSP) models. The colors are based on SDSS observations of M31's clusters and provide the largest population of star clusters with accurate photometry available from the survey. As such, it is a unique sample with which to compare SSP models with SDSS observations. From this work, we identify a significant offset between the SSP models and the clusters' g-r colors, with the models predicting colors which are too red by g-r\sim0.1. This finding is consistent with previous observations of luminous red galaxies in the SDSS, which show a similar discrepancy. The identification of this offset in globular clusters suggests that it is very unlikely to be due to a minority population of young stars. The recently updated SSP model of Maraston & Stromback better represents the observed g-r colors. This model is based on the empirical MILES stellar library, rather than theoretical libraries, suggesting an explanation for the g-r discrepancy.Comment: 8 pages, 4 figures, accepted for publication in Ap

    Polarimetry and the High-Energy Emission Mechanisms in Quasar Jets

    Full text link
    The emission mechanisms in extragalactic jets include synchrotron and various inverse-Compton processes. At low (radio through infrared) energies, it is widely agreed that synchrotron emission dominates in both low-power (FR I) and high-power (FR II and quasar) jets, because of the power-law nature of the spectra observed and high polarizations. However, at higher energies, the emission mechanism for high-power jets at kpc scales is hotly debated. Two mechanisms have been proposed: either inverse-Compton of cosmic microwave background photons or synchrotron emission from a second, high-energy population of electrons. Here we discuss optical polarimetry as a method for diagnosing the mechanism for the high-energy emission in quasar jets, as well as revealing the jet's three-dimensional energetic and magnetic field structure. We then discuss high-energy emission mechanisms for powerful jets in the light of the HST polarimetry of PKS 1136-135.Comment: 4 pages, 1 figure. To appear in proceedings of "The Monster's Fiery Breath: Feedback in galaxies, groups, and clusters" meeting, June 1-5, 2009 held in Madison, WI, US

    Extragalactic jets with helical magnetic fields: relativistic MHD simulations

    Full text link
    Extragalactic jets are inferred to harbor dynamically important, organized magnetic fields which presumably aid in the collimation of the relativistic jet flows. We here explore by means of grid-adaptive, high resolution numerical simulations the morphology of AGN jets pervaded by helical field and flow topologies. We concentrate on morphological features of the bow shock and the jet beam behind the Mach disk, for various jet Lorentz factors and magnetic field helicities. We investigate the influence of helical magnetic fields on jet beam propagation in overdense external medium. We use the AMRVAC code, employing a novel hybrid block-based AMR strategy, to compute ideal plasma dynamics in special relativity. The helicity of the beam magnetic field is effectively transported down the beam, with compression zones in between diagonal internal cross-shocks showing stronger toroidal field regions. In comparison with equivalent low-relativistic jets which get surrounded by cocoons with vortical backflows filled by mainly toroidal field, the high speed jets demonstrate only localized, strong toroidal field zones within the backflow vortical structures. We find evidence for a more poloidal, straight field layer, compressed between jet beam and backflows. This layer decreases the destabilizing influence of the backflow on the jet beam. In all cases, the jet beam contains rich cross-shock patterns, across which part of the kinetic energy gets transferred. For the high speed reference jet considered here, significant jet deceleration only occurs beyond distances exceeding O(100Rj){\cal O}(100 R_j), as the axial flow can reaccelerate downstream to the internal cross-shocks. This reacceleration is magnetically aided, due to field compression across the internal shocks which pinch the flow.Comment: 16 pages, Astronomy and Astrophysics accepted for publicatio

    Detection of non-thermal X-ray emission in the lobes and jets of Cygnus A

    Get PDF
    This article has been published in Monthly Notices of the Royal Astronomical Society © 2018 The Author(s). Published by Oxford University Press on behalf of the Royal Astronomical Society. All rights reserved. 21 pages, 8 figuresWe present a spectral analysis of the lobes and X-ray jets of Cygnus A, using more than 2 Ms of Chandra\textit{Chandra} observations. The X-ray jets are misaligned with the radio jets and significantly wider. We detect non-thermal emission components in both lobes and jets. For the eastern lobe and jet, we find 1 keV flux densities of 7110+1071_{-10}^{+10} nJy and 244+424_{-4}^{+4} nJy, and photon indices of 1.720.03+0.031.72_{-0.03}^{+0.03} and 1.640.04+0.041.64_{-0.04}^{+0.04} respectively. For the western lobe and jet, we find flux densities of 5013+1250_{-13}^{+12} nJy and 135+513_{-5}^{+5} nJy, and photon indices of 1.970.10+0.231.97_{-0.10}^{+0.23} and 1.860.12+0.181.86_{-0.12}^{+0.18} respectively. Using these results, we modeled the electron energy distributions of the lobes as broken power laws with age breaks. We find that a significant population of non-radiating particles is required to account for the total pressure of the eastern lobe. In the western lobe, no such population is required and the low energy cutoff to the electron distribution there needs to be raised to obtain pressures consistent with observations. This discrepancy is a consequence of the differing X-ray photon indices, which may indicate that the turnover in the inverse-Compton spectrum of the western lobe is at lower energies than in the eastern lobe. We modeled the emission from both jets as inverse-Compton emission. There is a narrow region of parameter space for which the X-ray jet can be a relic of an earlier active phase, although lack of knowledge about the jet's electron distribution and particle content makes the modelling uncertain.Peer reviewedFinal Published versio
    corecore