Development of an improved method of consolidating fatigue life data

A fatigue data consolidation model that incorporates recent advances in life prediction methodology was developed. A combined analytic and experimental study of fatigue of notched 2024-T3 aluminum alloy under constant amplitude loading was carried out. Because few systematic and complete data sets for 2024-T3 were available in the program generated data for fatigue crack initiation and separation failure for both zero and nonzero mean stresses. Consolidations of these data are presented

The influence of defects of the fatigue resistance of butt and girth welds in A106B steel

This three-phase study was directed at developing a fitness for service defect acceptance criteria for welds with defect indications. The study focussed on A106 Gr. B steel pipe. The first phase involved a literature search and critical review to develop the preliminary acceptance criteria to the extent permitted by the data. The second phase developed data for flat plate, wall segment, and vessel specimens containing artificial or natural planar or volumetric defects. The final phase developed acceptance criteria from the test data

Creep fatigue of low-cobalt superalloys: Waspalloy, PM U 700 and wrought U 700

The influence of cobalt content on the high temperature creep fatigue crack initiation resistance of three primary alloys was evaluated. These were Waspalloy, Powder U 700, and Cast U 700, with cobalt contents ranging from 0 up to 17 percent. Waspalloy was studied at 538 C whereas the U 700 was studied at 760 C. Constraints of the program required investigation at a single strain range using diametral strain control. The approach was phenomenological, using standard low cycle fatigue tests involving continuous cycling tension hold cycling, compression hold cycling, and symmetric hold cycling. Cycling in the absence of or between holds was done at 0.5 Hz, whereas holds when introduced lasted 1 minute. The plan was to allocate two specimens to the continuous cycling, and one specimen to each of the hold time conditions. Data was taken to document the nature of the cracking process, the deformation response, and the resistance to cyclic loading to the formation of small cracks and to specimen separation. The influence of cobalt content on creep fatigue resistance was not judged to be very significant based on the results generated. Specific conclusions were that the hold time history dependence of the resistance is as significant as the influence of cobalt content and increased cobalt content does not produce increased creep fatigue resistance on a one to one basis

Construction and validation of a questionnaire to assess student satisfaction with mathematics learning materials

Sixth Edition Technological Ecosystems for Enhancing MulticulturalityMathematics is an essential branch for the scientific development and its study is mandatory in most university degrees. However, currently the level of academic performance and motivation of students to learn this science is not the desired one. The students can use different learning tools inside and outside the math classroom, enhancing the quality of the learning materials that are designed essentially to facilitate the learning of mathematics. The present research project aims to determine the validity and reliability of a measurement instrument that allows theassessment of the satisfaction of the students with the availablelearning materials. To fulfill the objectives of this research, the method of survey was used. A study with a quantitative approach was developed, which led to the design and validation of a questionnaire by a group of 7 experts. The validation closed after applying a pilot study with 728 students. It concluded positively, obtaining nine factors that coincide with the revision of the literature: technological quality, quality of content, visual quality, didactic significance, adequacy of content, relationship between theory and practice, involvement, contribution to learning, relevance and interaction between educational actors. The results of this questionnaire provide to the international scientific community with relevant information for the design, selection, and use of study materials in the classrooms, which will contribute to raising the levels of student engagement, and their academic performance in mathematics, secondaril

Colapso traqueal

El presente trabajo ha sido realizado con una revisión de 14 perros afectados con distintos grados de colapso traqueal, diagnosticados con radiografías. También se hace un estudio diferencial de otros estados patológicos que podrían confundirse.This work has been make with a revision of 14 affected dogs wíth differents degrees of tracheal collapse, diagnosed with X-ray. Also on makes a different study about others pathologicals states that can be motive of confusion

Application of Anodic Stripping Voltammetry to assess sorption performance of an industrial waste entrapped in alginate beads to remove As(V)

AbstractA solid waste material containing Fe(III) and other metal (hydr)oxides produced in a metal surface treatment industry has been investigated for As(V) removal. In order to facilitate sorbent application, 2% of raw material has been entrapped in calcium alginate gel matrix (2% O-CA).An accurate characterization of the sorption on gel beads was undertaken, considering thermodynamic and kinetic aspects. All experiments were carried out at pH 8, since the maximum As(V) sorption was reached between pH 6 and 9. About isotherms, the best fit was obtained considering the Langmuir model and a capacity of 1.9mg/g was achieved. The kinetic profiles evidenced that a quantitative sorption was obtained within 10h. The 2% O-CA beads were also tested for continuous As(V) removal in a fixed bed column. Experiments were performed at constant flow rate, and varying the inlet As(V) concentration. With a view to design an automatic system for As(V) analysis in the outlet flow, the suitability of applying Anodic Stripping Voltammetry was evaluated: the method resulted appropriated to follow the As(V) content in the outlet solutions of columns with metal inlet concentration <1 mg/L.These results suggested that 2% O-CA beads could be a promising sorbent candidate for As(V) removal

Searching for Authenticity in Disability Identity Development

This article explores the nuances and pathways of disability identity development as well as what may constitute authentic disability identity in various theories and models. Authentic disability identity is influenced by how individuals interact with different power structures and systems and ultimately how they are related to normativity produced by ableism. Because each individual will have unique interactions with these systems, identity development and thus authenticity varies. Practitioners in higher education, with an understanding of how systems influence such nuanced identity, can create more open and flexible pathways to accommodations, improve outreach, and expand support outside of academic contexts

On stability of discretizations of the Helmholtz equation (extended version)

We review the stability properties of several discretizations of the Helmholtz equation at large wavenumbers. For a model problem in a polygon, a complete $k$-explicit stability (including $k$-explicit stability of the continuous problem) and convergence theory for high order finite element methods is developed. In particular, quasi-optimality is shown for a fixed number of degrees of freedom per wavelength if the mesh size $h$ and the approximation order $p$ are selected such that $kh/p$ is sufficiently small and $p = O(\log k)$, and, additionally, appropriate mesh refinement is used near the vertices. We also review the stability properties of two classes of numerical schemes that use piecewise solutions of the homogeneous Helmholtz equation, namely, Least Squares methods and Discontinuous Galerkin (DG) methods. The latter includes the Ultra Weak Variational Formulation

A rigorous analysis of high order electromagnetic invisibility cloaks

There is currently a great deal of interest in the invisibility cloaks recently proposed by Pendry et al. that are based in the transformation approach. They obtained their results using first order transformations. In recent papers Hendi et al. and Cai et al. considered invisibility cloaks with high order transformations. In this paper we study high order electromagnetic invisibility cloaks in transformation media obtained by high order transformations from general anisotropic media. We consider the case where there is a finite number of spherical cloaks located in different points in space. We prove that for any incident plane wave, at any frequency, the scattered wave is identically zero. We also consider the scattering of finite energy wave packets. We prove that the scattering matrix is the identity, i.e., that for any incoming wave packet the outgoing wave packet is the same as the incoming one. This proves that the invisibility cloaks can not be detected in any scattering experiment with electromagnetic waves in high order transformation media, and in particular in the first order transformation media of Pendry et al. We also prove that the high order invisibility cloaks, as well as the first order ones, cloak passive and active devices. The cloaked objects completely decouple from the exterior. Actually, the cloaking outside is independent of what is inside the cloaked objects. The electromagnetic waves inside the cloaked objects can not leave the concealed regions and viceversa, the electromagnetic waves outside the cloaked objects can not go inside the concealed regions. As we prove our results for media that are obtained by transformation from general anisotropic materials, we prove that it is possible to cloak objects inside general crystals.Comment: The final version is now published in Journal of Physics A: Mathematical and Theoretical, vol 41 (2008) 065207 (21 pp). Included in IOP-Selec

Nonlinear damage analysis: Postulate and evaluation

The objective of this program is to assess the viability of a damage postulate which asserts that the fatigue resistance curve of a metal is history dependent due to inelastic action. The study focusses on OFE copper because this simple model material accentuates the inelastic action central to the damage postulate. Data relevant to damage evolution and crack initiation are developed via a study of surface topography. The effects of surface layer residual stresses are explored via comparative testing as were the effects in initial prestraining. The results of the study very clearly show the deformation history dependence of the fatigue resistance of OFE copper. Furthermore the concept of deformation history dependence is shown to qualitatively explain the fatigue resistance of all histories considered. Likewise quantitative predictions for block cycle histories are found to accurately track the observed results. In this respect the assertion that damage per cycle for a given level of the damage parameter is deformation history dependent appears to be physically justified