Estimating growth parameters for Otolithes ruber in waters of Bushehr, Hormozgan and Sistan and Baluchestan Province, Southern Iran

Using length frequency of the Otolithes ruber collected in waters of three southern province of Iran, we estimated the fish growth parameters and monthly measured fork length of around 1000 fish caught using gill net with a mesh size of 6.5 centimeters in waters of this study area. The length infinity (L∞) in Bushehr, Hormozgan and Sistan and Baluchistan province was estimated as 58.5, 56, 59.5 centimeters, growth coefficient per year (K) as 0.48, 043, 0.32 and age at zero length (to) as -0.006, -0.002, -0.001 respectively. The relationship between length and weight of the fish in the three provinces determined. The parameters q, b and r (correlation coefficient) were 0.173, 2.868, 0.984 for Bushehr, 0.012, 2.962, 0.932 for Hormozgan and 0.056, 2.604, 0.921 for Sistan and Baluchestan province. We also evaluated the average length for the fish caught in different months and landing places. An ANOVA test showed a significant difference (P≤0.05) between the average lengths of the fish caught in different months

Population dynamics of the Spanish mackerel (Scomberomorus commerson) in coastal waters of Oman Sea

Length composition data of narrow-barred Spanish mackerel, Scomberomorus commerson (Lacepede 1800), landed between April 2002 to March 2004, were monthly used to estimate the growth, mortality and exploitation parameters of the stock. Maximum fork length and weight were 170 cm and 38 kg, respectively. Nonlinear least square fitting provided a complete set of von Bertalanffy growth estimates: L¥=178 cm (FL); K=0.28 and to= -0.36 years. The estimated value of total mortality based on length converted catch curve using these growth parameters is Z=0.95 year-I. Natural mortality based on growth parameters and mean environmental temperature (T=26.5°C) is M=0.36 year-1. Furthermore, the annual instantaneous fishing mortality rate of 0.59 year-1 was by far in excess of the precautionary target (Fopt=0.18 year-1) and limit (Flimit=0.24 year-1) biological reference points, indicating that the resource is heavily over-exploited and the management of this species should be implanted rapidly if they are to remain sustainable

Implication of complex vertebral malformation and deficiency of uridine monophosphate synthase on molecular-based testing in the Iranian Holstein bulls population

The aim of this study was to identify the deficiency of uridine monophosphate synthase (DUMPS) and the complex vertebral malformation (CVM) in Iranian Holstein bulls. A total of 144 blood samples were prepared of Holstein bulls in Abbas Abad Animal Breeding Center and Ferdowsi University of Mashhad's Dairy Farm in Khorasan state of Iran. Genomic PCR-RFLP protocol was performed to amplify the polymorphic region of the bovine uridine monophosphate synthase UMPS gene. Also, genomic PCR-SSCP method was performed for CVM to amplify the polymorphic region of the bovine solutecarrier family 35 member 3 (SLC35A3) genes. The results of this study demonstrated that there was no carrier of DUMPS and CVM in Iranian bulls in these centers

The road to developing economically feasible plans for green, comfortable and energy efficient buildings

Owing to the current challenges in energy and environmental crises, improving buildings, as one of the biggest concerns and contributors to these issues, is increasingly receiving attention from the world. Due to a variety of choices and situations for improving buildings, it is important to review the building performance optimization studies to find the proper solution. In this paper, these studies are reviewed by analyzing all the different key parameters involved in the optimization process, including the considered decision variables, objective functions, constraints, and case studies, along with the software programs and optimization algorithms employed. As the core literature, 44 investigations recently published are considered and compared. The current investigation provides sufficient information for all the experts in the building sector, such as architects and mechanical engineers. It is noticed that EnergyPlus and MATLAB have been employed more than other software for building simulation and optimization, respectively. In addition, among the nine different aspects that have been optimized in the literature, energy consumption, thermal comfort, and economic benefits are the first, second, and third most optimized, having shares of 38.6%, 22.7%, and 17%, respectively

Tubulin-binding dibenz[c,e]oxepines: Part 2 Structural variation and biological evaluation as tumour vasculature disrupting agents

5,7-Dihydro-3,9,10,11-tetramethoxybenz[c,e]oxepin-4-ol 1, prepared from a dibenzyl ether precursor via Pd-catalysed intramolecular direct arylation, possesses broad-spectrum in vitro cytotoxicity towards various tumour cell lines, and induces vascular shutdown, necrosis and growth delay in tumour xenografts in mice at sub-toxic doses. The biological properties of 1 and related compounds can be attributed to their ability to inhibit microtubule assembly at the micromolar level, by binding reversibly to the same site of the tubulin αβ-heterodimer as colchicine 2 and the allocolchinol, N-acetylcolchinol 4

Active fixturing: literature review and future research directions

Fixtures are used to fixate, position and support workpieces and represent a crucial tool in manufacturing. Their performance determines the result of the whole manufacturing process of a product. There is a vast amount of research done on automatic fixture layout synthesis and optimisation and fixture design verification. Most of this work considers fixture mechanics to be static and the fixture elements to be passive. However, a new generation of fixtures has emerged that has actuated fixture elements for active control of the part–fixture system during manufacturing operations to increase the end product quality. This paper analyses the latest studies in the field of active fixture design and its relationship with flexible and reconfigurable fixturing systems. First, a brief introduction is given on the importance of research of fixturing systems. Secondly, the basics of workholding and fixture design are visited, after which the state-of-the-art in active fixturing and related concepts is presented. Fourthly, part–fixture dynamics and design strategies which take these into account are discussed. Fifthly, the control strategies used in active fixturing systems are examined. Finally, some final conclusions and prospective future research directions are presented

When to change needles during neuromodulator injections—An electron-microscopy investigation into needle tip deformation

Background: Neuromodulator injections are minimally invasive procedures performed across the globe. Despite their ubiquity, there is a dearth of information on whether and how needle tips used for neuromodulator procedures are deformed after repeated injections. Objective: We investigated the magnitude of needle tip deformation following sequential injection passes (3×, 5×, and 10×) during facial neuromodulator injections with three commonly used needle sizes (30G, 31G, and 32G). Methods: Neuromodulator was administered for four different aesthetic indications. Each collected needle was mounted and imaged in a Philips XL-30 Scanning electron microscope. Images were processed using ImageJ photo analysis software. Results: Forty-five needle tips were investigated. When comparing the facial regions of interest, a statistically significant difference in deformation percentage was found when injecting 10× (p = 0.044) with greatest damage after injecting the glabella (38.4%), followed by lateral canthus (27.9%), forehead (27.5%), and midface (23.1%). Independent of facial region targeted, the mean percentage of needle deformation at 3× was 14.8%, at 5× 19.6%, and at 10× 29.2% with p &lt; 0.001. Smaller needle size corresponded to smaller percentage of damage. Conclusion: Exchanging needles after more than five injection passes will minimize needle deformation and likely increase injection precision.</p