The RMS Survey: Resolving kinematic distance ambiguities towards a sample of compact HII regions using HI absorption

We present high-resolution HI data obtained using the Australia Telescope Compact Array to resolve the near/far distance ambiguities towards a sample of compact HII regions from the Red MSX Source (RMS) survey. The high resolution data are complemented with lower resolution archival HI data extracted from the Southern and VLA Galactic Plane surveys. We resolve the distance ambiguity for nearly all of the 105 sources where the continuum was strong enough to allow analysis of the HI absorption line structure. This represents another step in the determination of distances to the total RMS sample, which with over 1,000 massive young stellar objects and compact HII regions, is the largest and most complete sample of its kind. The full sample will allow the distribution of massive star formation in the Galaxy to be examined.Comment: Accepted by MNRAS. This paper consists of 15 pages and contains 10 figures and 5 table

Response of beam-to-column web cleated joints for FRP pultruded members

Physical testing is used to characterize the structural properties of beam-to-column joints, comprising pultruded fiber-reinforced polymer (FRP) H-shapes of depth 203 mm, connected by 128 mm-long web cleats and two M16 bolts per leg. Testing is performed on two batches of nominally identical specimens. One batch had web cleats of pultruded FRP and the other had structural steel. The structural behavior of the joints is based on their moment-rotation responses, failure modes, and serviceability vertical deflection limits. Joints with FRP cleats failed by delamination cracking at the top of the cleats, and when the cleats were of steel, the FRP failure occurred inside the column members. Neither failure mode is reported in the design manuals from pultruders. At the onset of the FRP damage, it was found that the steel joints were twice as stiff as the FRP joints. On the basis of a characteristic (damage) rotation, calculated in accordance with Eurocode 0, the serviceability deflection limits are established to be span/300 and span/650 for the joints with FRP and steel cleats, respectively. This finding suggests that appropriate deflection limits, in relation to cleated connections, should be proposed in manufactures’ design manuals and relative design standards and design codes. Failure to address the serviceability, by the engineer of record, could lead to unreliable designs

The Red MSX Source Survey: The Massive Young Stellar Population of Our Galaxy

We present the Red MSX Source survey, the largest statistically selected catalog of young massive protostars and H II regions to date. We outline the construction of the catalog using mid- and near-infrared color selection. We also discuss the detailed follow up work at other wavelengths, including higher spatial resolution data in the infrared. We show that within the adopted selection bounds we are more than 90% complete for the massive protostellar population, with a positional accuracy of the exciting source of better than 2 arcsec. We briefly summarize some of the results that can be obtained from studying the properties of the objects in the catalog as a whole; we find evidence that the most massive stars form: (1) preferentially nearer the Galactic center than the anti-center; (2) in the most heavily reddened environments, suggestive of high accretion rates; and (3) from the most massive cloud cores

The RMS Survey: The Bolometric Fluxes and Luminosity Distributions of Young Massive Stars

Context: The Red MSX Source (RMS) survey is returning a large sample of massive young stellar objects (MYSOs) and ultra-compact (UC) \HII{} regions using follow-up observations of colour-selected candidates from the MSX point source catalogue. Aims: To obtain the bolometric fluxes and, using kinematic distance information, the luminosities for young RMS sources with far-infrared fluxes. Methods: We use a model spectral energy distribution (SED) fitter to obtain the bolometric flux for our sources, given flux data from our work and the literature. The inputs to the model fitter were optimised by a series of investigations designed to reveal the effect varying these inputs had on the resulting bolometric flux. Kinematic distances derived from molecular line observations were then used to calculate the luminosity of each source. Results: Bolometric fluxes are obtained for 1173 young RMS sources, of which 1069 have uniquely constrained kinematic distances and good SED fits. A comparison of the bolometric fluxes obtained using SED fitting with trapezium rule integration and two component greybody fits was also undertaken, and showed that both produce considerable scatter compared to the method used here. Conclusions: The bolometric flux results allowed us to obtain the luminosity distributions of YSOs and UC\HII{} regions in the RMS sample, which we find to be different. We also find that there are few MYSOs with L $\geq$ 10$^{5}$\lsol{}, despite finding many MYSOs with 10$^{4}$\lsol{} $\geq$ L $\geq$ 10$^{5}$\lsol{}.Comment: 12 pages, 12 figures, 3 tables, accepted to A&A. The full versions of tables 1 and 2 will be available via the CDS upon publicatio

VLTI/MIDI 10 micron interferometry of the forming massive star W33A

We report on resolved interferometric observations with VLTI/MIDI of the massive young stellar object (MYSO) W33A. The MIDI observations deliver spectrally dispersed visibilities with values between 0.03 and 0.06, for a baseline of 45m over the wavelength range 8-13 micron. The visibilities indicate that W33A has a FWHM size of approximately 120AU (0.030'') at 8 micron which increases to 240AU at 13 micron, scales previously unexplored among MYSOs. This observed trend is consistent with the temperature falling off with distance. 1D dust radiative transfer models are simultaneously fit to the visibility spectrum, the strong silicate feature and the shape of the mid infrared spectral energy distribution (SED). For any powerlaw density distribution, we find that the sizes (as implied by the visibilities) and the stellar luminosity are incompatible. A reduction to a third of W33A's previously adopted luminosity is required to match the visibilities; such a reduction is consistent with new high resolution 70 micron data from Spitzer's MIPSGAL survey. We obtain best fits for models with shallow dust density distributions of r^(-0.5) and r^(-1.0) and for increased optical depth in the silicate feature produced by decreasing the ISM ratio of graphite to silicates and using optical grain properties by Ossenkopf et al. (1992).Comment: 4 pages, 4 figures. Accepted for ApJ letter

Deformation of a nearly hemispherical conducting drop due to an electric field: theory and experiment

We consider, both theoretically and experimentally, the deformation due to an electric field of a pinned nearly-hemispherical static sessile drop of an ionic fluid with a high conductivity resting on the lower substrate of a parallel plate capacitor. Using both numerical and asymptotic approaches we find solutions to the coupled electrostatic and augmented Young–Laplace equations which agree very well with the experimental results. Our asymptotic solution for the drop interface extends previous work in two ways, namely to drops that have zero-field contact angles that are not exactly π/2 and to higher order in the applied electric field, and provides useful predictive equations for the changes in the height, contact angle and pressure as functions of the zero-field contact angle, drop radius, surface tension and applied electric field. The asymptotic solution requires some numerical computations, and so a surprisingly accurate approximate analytical asymptotic solution is also obtained

Water distribution in shocked regions of the NGC1333-IRAS4A protostellar outflow

We present the study of the H2O spatial distribution at two bright shocked regions along IRAS4A, one of the strongest H2O emitters among the Class 0 outflows. We obtained Herschel-PACS maps of the IRAS4A outflow and HIFI observations of two shocked positions. The largest HIFI beam of 38 arcsec at 557 GHz was mapped in several key water lines with different upper energy levels, to reveal possible spatial variations of the line profiles. We detect four H2O lines and CO (16-15) at the two selected positions. In addition, transitions from related outflow and envelope tracers are detected. Different gas components associated with the shock are identified in the H2O emission. In particular, at the head of the red lobe of the outflow, two distinct gas components with different excitation conditions are distinguished in the HIFI emission maps: a compact component, detected in the ground-state water lines, and a more extended one. Assuming that these two components correspond to two different temperature components observed in previous H2O and CO studies, the excitation analysis of the H2O emission suggests that the compact (about 3 arcsec) component is associated with a hot (T~1000 K) gas with densities ~(1-4)x10^5 cm^{-3}, whereas the extended one (10-17 arcsec) traces a warm (T~300-500 K) and dense gas (~(3-5)x10^7 cm^{-3}). Finally, using the CO (16-15) emission observed at R2, we estimate the H2O/H2 abundance of the warm and hot components to be (7-10)x10^{-7} and (3-7)x10^{-5}. Our data allowed us, for the first time, to resolve spatially the two temperature components previously observed with HIFI and PACS. We propose that the compact hot component may be associated with the jet that impacts the surrounding material, whereas the warm, dense, and extended component originates from the compression of the ambient gas by the propagating flow.Comment: 13 pages, 11 figures. Accepted for publication in Astronomy and Astrophysic

The RMS Survey: 6 cm continuum VLA observations towards candidate massive YSOs in the northern hemisphere

(Abridged) Context: The Red MSX Source (RMS) survey is an ongoing multi-wavelength observational programme designed to return a large, well-selected sample of massive young stellar objects (MYSOs). We have identified $\sim$2000 MYSO candidates located throughout the Galaxy by comparing the colours of MSX and 2MASS point sources to those of known MYSOs. Aims: To identify the populations of UCHII regions and PNe within the sample and examine their Galactic distribution. Method: We have conducted high resolution radio continuum observations at 6 cm towards 659 MYSO candidates in the northern hemisphere (10\degr< l < 250\degr) using the VLA. In addition to these targeted observations we present archival data towards a further 315 RMS sources extracted from a previous VLA survey of the inner Galaxy. Results: We find radio emission towards 272 ($\sim$27% of the observed sample). Using results from other parts of our multi-wavelength survey we separate these RMS-radio associations into two distinct types of objects, classifying 51 as PNe and a further 208 as either compact or UC HII regions. Using this well selected sample of HII regions we estimate their Galactic scale height to be 0.6\degr. Conclusions: Using radio continuum and archival data we have identified 79 PNe and 391 HII regions within the northern RMS catalogue. We estimate the total fraction of contamination by PNe in the RMS sample is of order 10%. The sample of HII regions is probably the best representation to date of the Galactic population of HII regions as a whole.Comment: Accepted for publication in Astronomy and Astrophysics. 15 pages, 9 figures and 5 tables. Full versions of Tables 3, 4 and 5 and Figs. 2, 4 and 7 will only be available via CDS or the RMS website at http:/www.ast.leeds.ac.uk/cgi-bin/RMS/RMS_VLA_IMAGES.cg

SPRAT: Spectrograph for the Rapid Acquisition of Transients

We describe the development of a low cost, low resolution (R ~ 350), high throughput, long slit spectrograph covering visible (4000-8000) wavelengths. The spectrograph has been developed for fully robotic operation with the Liverpool Telescope (La Palma). The primary aim is to provide rapid spectral classification of faint (V ∼ 20) transient objects detected by projects such as Gaia, iPTF (intermediate Palomar Transient Factory), LOFAR, and a variety of high energy satellites. The design employs a volume phase holographic (VPH) transmission grating as the dispersive element combined with a prism pair (grism) in a linear optical path. One of two peak spectral sensitivities are selectable by rotating the grism. The VPH and prism combination and entrance slit are deployable, and when removed from the beam allow the collimator/camera pair to re-image the target field onto the detector. This mode of operation provides automatic acquisition of the target onto the slit prior to spectrographic observation through World Coordinate System fitting. The selection and characterisation of optical components to maximise photon throughput is described together with performance predictions. © (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only

The RMS survey: near-IR spectroscopy of massive young stellar objects

Near-infrared H- and K-band spectra are presented for 247 objects, selected from the Red MSX Source (RMS) survey as potential young stellar objects (YSOs). 195 (∼80 per cent) of the targets are YSOs, of which 131 are massive YSOs (L BOL > 5×10 3 L ⊙ , M > 8 M ⊙ ). This is the largest spectroscopic study of massive YSOs to date, providing a valuable resource for the study of massive star formation. In this paper, we present our exploratory analysis of the data. The YSOs observed have a wide range of embeddedness (2.7 < A V < 114), demonstrating that this study covers minimally obscured objects right through to very red, dusty sources. Almost all YSOs show some evidence for emission lines, though there is a wide variety of observed properties. The most commonly detected lines are Brγ, H 2 , fluorescent Fe ii, CO bandhead, [Fe ii] and He i 2-1 1 S- 1 P, in order of frequency of occurrence. In total, ∼40 per cent of the YSOs display either fluorescent Fe ii 1.6878 μm or CO bandhead emission (or both), indicative of a circumstellar disc; however, no correlation of the strength of these lines with bolometric luminosity was found. We also find that ∼60 per cent of the sources exhibit [Fe ii] or H 2 emission, indicating the presence of an outflow. Three quarters of all sources have Brγ in emission. A good correlation with bolometric luminosity was observed for both the Brγ and H 2 emission line strengths, covering 1 < L BOL < 3.5 × 10 5 L ⊙ . This suggests that the emission mechanism for these lines is the same for low-, intermediate- and high-mass YSOs, i.e. high-mass YSOs appear to resemble scaled-up versions of low-mass YSOs. © 2013 The Authors Published by Oxford University Press on behalf of the Royal Astronomical Society