590 research outputs found

    Historical reconstruction of polychlorinated biphenyl (PCB) exposures for workers in a capacitor manufacturing plant

    Get PDF
    We developed a semiquantitative job exposure matrix (JEM) for workers exposed to polychlorinated biphenyls (PCBs) at a capacitor manufacturing plant from 1946 to 1977. In a recently updated mortality study, mortality of prostate and stomach cancer increased with increasing levels of cumulative exposure estimated with this JEM (trend p values = 0.003 and 0.04, respectively). Capacitor manufacturing began with winding bales of foil and paper film, which were placed in a metal capacitor box (pre-assembly), and placed in a vacuum chamber for flood-filling (impregnation) with dielectric fluid (PCBs). Capacitors dripping with PCB residues were then transported to sealing stations where ports were soldered shut before degreasing, leak testing, and painting. Using a systematic approach, all 509 unique jobs identified in the work histories were rated by predetermined process- and plant-specific exposure determinants; then categorized based on the jobs' similarities (combination of exposure determinants) into 35 job exposure categories. The job exposure categories were ranked followed by a qualitative PCB exposure rating (baseline, low, medium, and high) for inhalation and dermal intensity. Category differences in other chemical exposures (solvents, etc.) prevented further combining of categories. The mean of all available PCB concentrations (1975 and 1977) for jobs within each intensity rating was regarded as a representative value for that intensity level. Inhalation (in microgram per cubic milligram) and dermal (unitless) exposures were regarded as equally important. Intensity was frequency adjusted for jobs with continuous or intermittent PCB exposures. Era-modifying factors were applied to the earlier time periods (1946-1974) because exposures were considered to have been greater than in later eras (1975-1977). Such interpolations, extrapolations, and modifying factors may introduce non-differential misclassification; however, we do believe our rigorous method minimized misclassification, as shown by the significant exposure-response trends in the epidemiologic analysis

    Celebrating Economies of Change: Brave Visions for Inclusive Futures

    Get PDF
    This issue has been inspired by a path-breaking conference held by the Canadian Society for Ecologi-cal Economics (CANSEE), which took place this past May 2019 in Waterloo, Ontario. Entitled Engaging Economies of Change, the conference aimed to ex-pand existing research networks in the economy-environment nexus by building connections beyond the academy in order to meaningfully engage with the practicalities of building and implementing change. This issue captures the rich content shared during the event, as well as descriptions of the pro-cesses and efforts made to create a welcoming and respectful space where academics and community activists could build alliances and discuss common challenges. The conference organizers – all graduate students and activists themselves -- called this ‘building a brave space’.This research was supported by the Social Sciences and Humanities Research Council of Canad

    Evaluation of cumulative PCB exposure estimated by a job exposure matrix versus PCB serum concentrations

    Get PDF
    Although polychlorinated biphenyls (PCBs) have been banned in many countries for more than three decades, exposures to PCBs continue to be of concern due to their long half-lives and carcinogenic effects. In National Institute for Occupational Safety and Health studies, we are using semiquantitative plant-specific job exposure matrices (JEMs) to estimate historical PCB exposures for workers (n = 24,865) exposed to PCBs from 1938 to 1978 at three capacitor manufacturing plants. A subcohort of these workers (n = 410) employed in two of these plants had serum PCB concentrations measured at up to four times between 1976 and 1989. Our objectives were to evaluate the strength of association between an individual worker's measured serum PCB levels and the same worker's cumulative exposure estimated through 1977 with the (1) JEM and (2) duration of employment, and to calculate the explained variance the JEM provides for serum PCB levels using (3) simple linear regression. Consistent strong and statistically significant associations were observed between the cumulative exposures estimated with the JEM and serum PCB concentrations for all years. The strength of association between duration of employment and serum PCBs was good for highly chlorinated (Aroclor 1254/HPCB) but not less chlorinated (Aroclor 1242/LPCB) PCBs. In the simple regression models, cumulative occupational exposure estimated using the JEMs explained 14-24% of the variance of the Aroclor 1242/LPCB and 22-39% for Aroclor 1254/HPCB serum concentrations. We regard the cumulative exposure estimated with the JEM as a better estimate of PCB body burdens than serum concentrations quantified as Aroclor 1242/LPCB and Aroclor 1254/HPCB

    Diffusion Monte Carlo calculations for the ground states of atoms and ions in neutron star magnetic fields

    Full text link
    The diffusion quantum Monte Carlo method is extended to solve the old theoretical physics problem of many-electron atoms and ions in intense magnetic fields. The feature of our approach is the use of adiabatic approximation wave functions augmented by a Jastrow factor as guiding functions to initialize the quantum Monte Carlo prodecure. We calcula te the ground state energies of atoms and ions with nuclear charges from Z= 2, 3, 4, ..., 26 for magnetic field strengths relevant for neutron stars.Comment: 6 pages, 1 figure, proceedings of the "9th International Conference on Path Integrals - New Trends and Perspectives", Max-Planck-Institut fur Physik komplexer Systeme, Dresden, Germany, September 23 - 28, 2007, to be published as a book by World Scientific, Singapore (2008

    Mortality among 24,865 workers exposed to polychlorinated biphenyls (PCBs) in three electrical capacitor manufacturing plants: a ten-year update

    Get PDF
    The objective of this analysis was to evaluate mortality among a cohort of 24,865 capacitor-manufacturing workers exposed to polychlorinated biphenyls (PCBs) at plants in Indiana, Massachusetts, and New York and followed for mortality through 2008. Cumulative PCB exposure was estimated using plant-specific job-exposure matrices. External comparisons to US and state-specific populations used standardized mortality ratios, adjusted for gender, race, age and calendar year. Among long-term workers employed 3 months or longer, within-cohort comparisons used standardized rate ratios and multivariable Poisson regression modeling. Through 2008, more than one million person-years at risk and 8749 deaths were accrued. Among long-term employees, all-cause and all-cancer mortality were not elevated; of the a priori outcomes assessed only melanoma mortality was elevated. Mortality was elevated for some outcomes of a priori interest among subgroups of long-term workers: all cancer, intestinal cancer and amyotrophic lateral sclerosis (women); melanoma (men); melanoma and brain and nervous system cancer (Indiana plant); and melanoma and multiple myeloma (New York plant). Standardized rates of stomach and uterine cancer and multiple myeloma mortality increased with estimated cumulative PCB exposure. Poisson regression modeling showed significant associations with estimated cumulative PCB exposure for prostate and stomach cancer mortality. For other outcomes of a priori interest--rectal, liver, ovarian, breast, and thyroid cancer, non-Hodgkin lymphoma, Alzheimer disease, and Parkinson disease--neither elevated mortality nor positive associations with PCB exposure were observed. Associations between estimated cumulative PCB exposure and stomach, uterine, and prostate cancer and myeloma mortality confirmed our previous positive findings

    Using structure-based organic chemistry online tutorials with automated correction for student practice and review

    Get PDF
    This article describes the development and implementation of an open-access organic chemistry question bank for online tutorials and assessments at University College Cork and Dublin Institute of Technology. SOCOT (structure-based organic chemistry online tutorials) may be used to supplement traditional small-group tutorials, thereby allowing students to develop essential problem-solving skills in organic chemistry. This online approach may be used for both formative and summative assessment. Students complete one problem set weekly or fortnightly, which consists of a number of questions of varying difficulty. A wide range of question types is possible; for example, prediction of reaction products, identification of reaction intermediates or reagents, and retrosynthetic analyses. Questions involving stereochemistry may be also be incorporated. The implementation is described, along with several sample questions and advice for creating questions. This approach is suitable for all levels of undergraduates, from introductory nonmajors to final-year chemistry students. Student feedback was overwhelmingly positive, and in particular, students found SOCOT to be a quite useful tool for review purposes. Our approach uses MarvinSketch, which is free for academic purposes, and the SMILES algorithm, which converts chemical structures into a text string and is compatible with any learning management system

    The helium atom in a strong magnetic field

    Get PDF
    We investigate the electronic structure of the helium atom in a magnetic field b etween B=0 and B=100a.u. The atom is treated as a nonrelativistic system with two interactin g electrons and a fixed nucleus. Scaling laws are provided connecting the fixed-nucleus Hamiltonia n to the one for the case of finite nuclear mass. Respecting the symmetries of the electronic Ham iltonian in the presence of a magnetic field, we represent this Hamiltonian as a matrix with res pect to a two-particle basis composed of one-particle states of a Gaussian basis set. The corresponding generalized eigenvalue problem is solved numerically, providing in the present paper results for vanish ing magnetic quantum number M=0 and even or odd z-parity, each for both singlet and triplet spin symmetry. Total electronic energies of the ground state and the first few excitations in each su bspace as well as their one-electron ionization energies are presented as a function of the magnetic fie ld, and their behaviour is discussed. Energy values for electromagnetic transitions within the M=0 sub space are shown, and a complete table of wavelengths at all the detected stationary points with respect to their field dependence is given, thereby providing a basis for a comparison with observed ab sorption spectra of magnetic white dwarfs.Comment: 21 pages, 4 Figures, acc.f.publ.in J.Phys.

    Hydrogen and Helium Atoms and Molecules in an Intense Magnetic Field

    Get PDF
    We calculate the atomic structure of hydrogen and helium, atoms and molecules in an intense magnetic field, analytically and numerically with a judiciously chosen basis.Comment: 16 pages, 5 figures, to appear in Phys. Rev.

    Density Matrix Functional Calculations for Matter in Strong Magnetic Fields: I. Atomic Properties

    Get PDF
    We report on a numerical study of the density matrix functional introduced by Lieb, Solovej and Yngvason for the investigation of heavy atoms in high magnetic fields. This functional describes {\em exactly} the quantum mechanical ground state of atoms and ions in the limit when the nuclear charge ZZ and the electron number NN tend to infinity with N/ZN/Z fixed, and the magnetic field BB tends to infinity in such a way that B/Z4/3B/Z^{4/3}\to\infty. We have calculated electronic density profiles and ground state energies for values of the parameters that prevail on neutron star surfaces and compared them with results obtained by other methods. For iron at B=1012B=10^{12} G the ground state energy differs by less than 2 \% from the Hartree-Fock value. We have also studied the maximal negative ionization of heavy atoms in this model at various field strengths. In contrast to Thomas-Fermi type theories atoms can bind excess negative charge in the density matrix model. For iron at B=1012B=10^{12} G the maximal excess charge in this model corresponds to about one electron.Comment: Revtex, 13 pages with 6 eps figures include

    Cold atoms in a high-Q ring-cavity

    Get PDF
    We report the confinement of large clouds of ultra-cold 85-Rb atoms in a standing-wave dipole trap formed by the two counter-propagating modes of a high-Q ring-cavity. Studying the properties of this trap we demonstrate loading of higher-order transverse cavity modes and excite recoil-induced resonances.Comment: 4 pages, 4 figure
    corecore