Spatial layout planning in sub-surface rail station design for effective fire evacuation

The London Underground network is a crucial part of the transportation system in one of only four ‘Alpha’ world cities. The other three – Paris, New York and Tokyo – also have such sub-surface railway transport systems that may benefit from this shape grammar station design process in a future research proposal. In London’s case, the passenger flow rates are the underlining factor in sizing infrastructure where passengers have access – it is therefore this criterion that provides the basis for the shape grammar formulation for the largest, oldest and one of the most complex underground systems in the world. The research aims to improve passenger fire evacuation times, with due cognisance of the growth of numbers using the system, and its present susceptibility to terrorist attacks taken into account. The proposed shape grammar approach will provide for generation of spatial layouts, based upon visual rules of shape recognition, replacement / union, their connectivity and spatial relationships. The paper concentrates on definition and implementation of novel shape grammar design rules that incorporate station planning design knowledge, and in particular also discusses designers’ fire risk assessment approach and related knowledge that is also needed to produce credible station design solutions. Development, to date, of the proposed artificially intelligent CAD environment is also described along with parallel theoretical research. The proposed CAD interface provides familiarity to the designer and avoids incompatibility issues regarding drawing exchange format between various software systems. The shape grammar layouts produced will be tested in SIMULEX, a commercially available evacuation package, and be compared against ‘traditionally’ designed layouts to demonstrate improvements of preliminary ‘reference’ designs, which follow the standard London Underground design process as a later stage of this research

Improved representation of the diurnal variation of warm season precipitation by an atmospheric general circulation model at a 10 km horizontal resolution

This study investigates the diurnal variation of the warm season precipitation simulated by the Goddard Earth Observing System version 5 atmospheric general circulation model for 2??years (2005???2006) at a horizontal resolution of 10??km. The simulation was validated with the satellite-derived Tropical Rainfall Measuring Mission (TRMM) 3B42 precipitation data and the Modern-Era Retrospective analysis for Research and Applications atmospheric reanalysis for atmospheric winds and moisture. The simulation is compared with the coarse-resolution run in 50??km to examine the impacts driven by resolution change. Overall, the 10??km model tends to reproduce the important features of the observed diurnal variation, such as the amplitude and phase at which precipitation peaks in the evening on land and in the morning over the ocean, despite an excessive amplitude bias over land. The model also reproduces the realistic propagation patterns of precipitation in the vicinity of ocean coasts and major mountains. The regional characteristics of the diurnal precipitation over two regions, the Bay of Bengal and the Great Plains in North America, are examined in detail, where the observed diurnal cycle exhibits a systematic transition in the peak phase due to the development and propagation of regional-scale convective systems. The model is able to reproduce this pattern as well as the diurnal variation of low-level wind and moisture convergence; however, it is less effective at representing the nocturnal peak of precipitation over the Great Plains. The model results suggest that increasing the horizontal resolution of the model to 10??km substantially improves the representation of the diurnal precipitation cycle. However, intrinsic model deficiencies in topographical precipitation and the accurate representation of mesoscale convective systems remain a challenge

Growth of quantum dot coated core-shell anisotropic nanowires for improved thermal and electronic transport

Anisotropic nanowires are promising candidates for electronic thermal management due to their unique electrical and thermal properties.However, eco-friendly solution-processed nanomaterials with an elaborate morphology and microstructure for modulating thermal andcharge transfer are still a considerable challenge. Herein, we present a simple but effective approach for synthesizing pseudo core-shell nano-wires through quantum dot (QD)-like nanostructure coating (p-NW@QD) to generate exceptional electron-phonon transport properties.With the assistance of diphenyl ether as a coordination solvent, high crystallinity lead sulfide NWs can be fabricated with a large aspect ratiotogether with uniform QD coating. Thisp-NW@QD exhibits high electronic mobility (30.65 cm2/Vs) as well as a diameter independent lowthermal conductivity (1.5361 W/m K). Direct charge/heat carrier flow measurements and computational simulations demonstrate that theunusual electrical and thermal transport phenomenon is strongly dependent on the fast charge transport through the QD shell, and a slowphonon migration across the Umklapp process dominated NW cores. These findings indicate a significant step toward colloidal synthesisnanostructures for future high-performance nanoelectronics and thermal energy devices

Red green blue emissive lead sulfide quantum dots: heterogeneous synthesis and applications.

Visible emission colloidal quantum dots (QDs) have shown promise in optical and optoelectronic applications. These QDs are typically composed of relatively expensive elements in the form of indium, cadmium, and gallium since alternative candidate materials exhibiting similar properties are yet to be realized. Herein, for the first time, we report red green blue (RGB) photoluminescences with quantum yields of 18% from earth-abundant lead sulfide (PbS) QDs. The visible emissive property is mainly attributed to a high degree of crystallinity even for the extremely small QD sizes (1-3 nm), which is realized by employing a heterogeneous reaction methodology at high growth temperatures (>170 °C). We demonstrate that the proposed heterogeneous synthetic method can be extended to the synthesis of other metal chalcogenide QDs, such as zinc sulfide and zinc selenide, which are promising for future industrial applications. More importantly, benefiting from the enlarged band gaps, the as-prepared PbS solar cells show an impressive open circuit voltage (∼0.8 V) beyond that reported to date

A922 Sequential measurement of 1 hour creatinine clearance (1-CRCL) in critically ill patients at risk of acute kidney injury (AKI)

Meeting abstrac

Chalcogenide solution-mediated activation protocol for scalable and ultrafast synthesis of single-crystalline 1-D copper sulfide for supercapacitor

Traditional synthetic routes for transition metal sulfides typically involve solution and thermal-based processes to exploit their favorable pseudo-capacitive properties. However, there is a practical need to develop alternative processes to fabricate metal sulfide electrodes because of the time-consuming processes (>12 h), additional heat-treatment to active reactants, relatively high post-heat-treatment temperature (200–400 °C) and non-scalable nature of existing synthetic routes. Herein, utilizing a solution-based sulfur precursor, one-dimensional single-crystalline Cu2S nanostructures have been successfully prepared via a solution-based direct synthesis process within 10 min at room temperature without the need for thermal treatment steps. The fabricated electrode exhibits a capacitance of 750 mF cm−2 at a current density of 2 mA cm−2. Moreover, the rate capacitance is maintained at about 82.3% as the current density is increased to 40 mA cm−2, and the capacity retains 90.5% of the initial value after 20 000 cycles. Importantly, as this method involves a solution-based formulation it is compatible with roll-to-roll processes, which is promising for mass and scalable production of the electrodes. The synthetic method ensures a facile and efficient approach to fabricating scalable one-dimensional single crystalline Cu2S nanostructures, highlighting the uniqueness of the solution-based sulfur activation method

Hierarchically assembled tubular shell-core-shell heterostructure of hybrid transition metal chalcogenides for high-performance supercapacitors with ultrahigh cyclability

Pseudo-capacitive transition metal chalcogenides have recently received considerable attention as a promising class of materials for high performance supercapacitors (SCs) due to their superior intrinsic conductivity to circumvent the limitations of corresponding transition metal oxides with relatively poor conductivity. However, the important challenge associated with the utilization of such high-capacitive electrode materials is the development of desirably structured electrode materials, enabling efficient and rapid Faradaic redox reactions and ultra long-term cycling. Here, we propose a hierarchically integrated hybrid transition metal (Cu-Ni) chalcogenide shell-core-shell (HTMC-SCS) tubular heterostructure using a facile bottom-up synthetic approach. The resultant HTMC-SCS electrode exhibits a high volumetric capacitance of 25.9 F cm−3 at a current density of 2 mA cm−2. Furthermore, asymmetric SCs based on an HTMC-SCS heterostructured electrode demonstrate a high power density (770 mW cm−3) and an energy density (2.63 mWh cm−3) as well as an ultrahigh reversible capacity with a capacitance retention of 84% and a long-term cycling stability of over 10000 cycles. Based on experimental results and density functional theory calculations, these remarkably improved electrochemical features are discussed and explained in terms of the unique combination of the conductive CuS core and active NiS shell materials, hierarchical tubular open geometry with nanoscale inner/outer shell structure, and mechanical stress-mitigating interlayer on shell-core-shell interface, allowing highly reversible and efficient electrochemical redox processes coupled with fast charge transfer kinetics and an electrochemically stable structure

Rosiglitazone and fenofibrate improve insulin sensitivity of pre-diabetic OLETF rats by reducing malonyl-CoA levels in the liver and skeletal muscle.

AIMS: Rosiglitazone and fenofibrate, specific agonists of the peroxisome proliferator activated receptors-γ (PPARγ) and -α (PPARα), respectively, improve insulin sensitivity in diabetic animals and in patients with type 2 diabetes. Here we investigated how pre-diabetic Otsuka Long–Evans Tokushima Fatty (OLETF) rats fed with normal and high-fat diets respond to these PPAR agonists. MAIN METHODS: Pre-diabetic OLETF rats were subjected to high-fat or standard diets with or without rosiglitazone or fenofibrate for 2 weeks. The metabolism of the rats and the levels of malonyl-CoA and activities of malonyl-CoA decarboxylase (MCD), acetyl-CoA carboxylase (ACC), and AMP-activated protein kinase (AMPK) in metabolic tissues were assessed. KEY FINDINGS: Rosiglitazone and fenofibrate significantly improved insulin sensitivity and reduced the levels of plasma triglycerides and free fatty acids in OLETF rats fed with a high-fat diet. Fenofibrate particularly reduced the body weight, fat, and total cholesterol in high fat diet OLETF rats. The highly elevated malonyl-CoA levels in the skeletal muscle and liver of OLETF rat were significantly reduced by rosiglitazone or fenofibrate due to, in part, the increased MCD activities and expression. On the other hand, ACC activities were unchanged in skeletal muscle and decreased in liver in high fat diet group. AMPK activities were dramatically decreased in OLETF rats and not affected by these agonists. SIGNIFICANCE: These results demonstrate that treatment of pre-diabetic OLETF rats–particularly those fed a high-fat diet–with rosiglitazone and fenofibrate significantly improves insulin sensitivity and fatty acid metabolism by increasing the activity of MCD and reducing malonyl-CoA levels in the liver and skeletal muscle

Predictive Factors for Efficacy of AST-120 Treatment in Diabetic Nephropathy: a Prospective Single-Arm, Open-Label, Multi-Center Study

BACKGROUND: Removal of uremic toxins such as indoxyl sulfate by AST-120 is known to improve renal function and delay the initiation of dialysis in patients with advanced chronic kidney disease. However, it is unclear whether the addition of AST-120 to conventional treatments is effective in delaying the progression of renal dysfunction in patients with diabetic nephropathy. METHODS: A total of 100 patients with type 2 diabetes and renal dysfunction (serum creatinine levels ranging from 1.5 to 3.0 mg/dL) were recruited from eight centers in Korea and treated with AST-120 (6 g/day) for 24 weeks. The primary endpoint was improvement in renal function measured as the gradient of the reciprocal serum creatinine level (1/sCr) over time (i.e., the ratio of 1/sCr time slope for post- to pre-AST-120 therapy). A response was defined as a ratio change of the regression coefficient of 1/sCr </= 0.90. RESULTS: Renal function improved in 80.3% of patients (61/76) after 24 weeks of AST-120 treatment. There were no differences between responder and non-responder groups in baseline characteristics except for diastolic blood pressure (73.5 +/- 9.5 mmHg in the responder group vs. 79.3 +/- 11.1 mmHg in the non-responder group: P = 0.046). Serum lipid peroxidation level decreased significantly in the responder group (from 2.25 +/- 0.56 muol/L to 1.91 +/- 0.72 muol/L: P = 0.002) but not in the non-responder group. CONCLUSION: The addition of AST-120 to conventional treatments may delay the progression of renal dysfunction in diabetic nephropathy. The antioxidant effect of AST-120 might contribute to improvement in renal function

Lobeglitazone and pioglitazone as add-ons to metformin for patients with type 2 diabetes: a 24-week, multicentre, randomized, double-blind, parallel-group, active-controlled, phase III clinical trial with a 28-week extension.

We aimed to compare the efficacy and safety of lobeglitazone and pioglitazone as add-ons to metformin in patients with type 2 diabetes. Patients who were inadequately controlled by metformin were randomized and treated once daily with either lobeglitazone (0.5 mg, n = 128) or pioglitazone (15 mg, n = 125) for 24 weeks, with a 28-week extension trial of lobeglitazone treatment in patients who consented. The primary endpoint was the change in glycated haemoglobin (HbA1c) concentration from baseline to week 24. At week 24, the mean change from baseline in HbA1c was -0.74% for the lobeglitazone group and -0.74% for the pioglitazone group, with a mean difference of 0.01% [95% confidence interval (CI) of difference, -0.16 to 0.18]. The effects of lobeglitazone on lipid variables and the adverse events associated with lobeglitazone were similar to those observed with pioglitazone. Lobeglitazone was not inferior to pioglitazone as an add-on to metformin in terms of their efficacy and safety