Galactic HCO+ Absorption toward Compact Extragalactic Radio Sources

As part of the search for the "dark molecular gas (DMG)," we report on the results of HCO$^+$ J = 1-0 absorption observations toward nine bright extragalactic millimeter wave continuum sources. The extragalactic sources are at high Galactic latitudes (|b| > 10$\deg$) and seen at small extinction (E(B-V) $\lesssim$ 0.1 mag). We have detected the HCO$^+$ absorption lines toward two sources, B0838+133 and B2251+158. The absorption toward B2251+158 was previously reported, while the absorption toward B0838+133 is a new detection. We derive hydrogen column densities or their upper limits toward the nine sources from our observations and compare them to those expected from CO line emission and far-infrared dust continuum emission. Toward the seven sources with no HCO$^+$ detection, CO emission has not been detected, either. Thus the sight lines are likely to be filled with almost pure atomic gas. Toward the two sources with HCO$^+$ detection, CO emission has been also detected. Comparison of the H$_2$ column densities from HCO$^+$ absorption and CO emission suggests a non-negligible amount of DMG toward B0838+133.Comment: 10 pages, 3 figures; accepted in Astrophysics and Space Science (ASTR-D-18-00258R1

The First Spectroscopically Resolved Sub-parsec Orbit of a Supermassive Binary Black Hole

One of the most intriguing scenarios proposed to explain how active galactic nuclei are triggered involves the existence of a supermassive binary black hole system in their cores. Here we present an observational evidence for the first spectroscopically resolved sub-parsec orbit of a such system in the core of Seyfert galaxy NGC 4151. Using a method similar to those typically applied for spectroscopic binary stars we obtained radial velocity curves of the supermassive binary system, from which we calculated orbital elements and made estimates about the masses of components. Our analysis shows that periodic variations in the light and radial velocity curves can be accounted for an eccentric, sub-parsec Keplerian orbit of a 15.9-year period. The flux maximum in the lightcurve correspond to the approaching phase of a secondary component towards the observer. According to the obtained results we speculate that the periodic variations in the observed H{\alpha} line shape and flux are due to shock waves generated by the supersonic motion of the components through the surrounding medium. Given the large observational effort needed to reveal this spectroscopically resolved binary orbital motion we suggest that many such systems may exist in similar objects even if they are hard to find. Detecting more of them will provide us with insight into black hole mass growth process.Comment: 29 pages, 10 figures, published in ApJ, 759, 11

Vitellogenin receptors during vitellogenesis in the rainbow trout Oncorhynchus mykiss

Rainbow trout vitellogenin receptors have been characterized by ligand blotting and Scatchard analysis. Their evolution has been studied over a reproductive cycle in a broodstock of 2-year-old females. The receptors were prepared from ovarian membrane homogenates and were solubilized using n-octyl-beta-D-glucopyranoside. The visualization of the receptor by ligand blotting using 125iodine-vitellogenin after sodium dodecyl sulfate electrophoresis revealed the existence of one major binding component corresponding to a protein of 113 kDa. The Scatchard transformation of the binding data revealed a single class of binding sites. The variations of the binding characteristics (Kd and maximum binding) were investigated during vitellogenesis. This study revealed that the Kd was not affected by oocyte growth during vitellogenesis, but was highly decreased in ovulated eggs. The receptor number increased during the same period from 35 to 860 fM per oocyte, while the receptor number per mm2 of oocyte membrane surface was doubled during the same period. (Résumé d'auteur

Quasars: from the Physics of Line Formation to Cosmology

Quasars accreting matter at very high rates (known as extreme Population A [xA] or super-Eddington accreting massive black holes) provide a new class of distance indicators covering cosmic epochs from the present-day Universe up to less than 1 Gyr from the Big Bang. The very high accretion rate makes it possible that massive black holes hosted in xA quasars radiate at a stable, extreme luminosity-to-mass ratio. This in turns translates into stable physical and dynamical conditions of the mildly ionized gas in the quasar low-ionization line emitting region. In this contribution, we analyze the main optical and UV spectral properties of extreme Population A quasars that make them easily identifiable in large spectroscopic surveys at low-z (z < 1) and intermediate-z (2 < z < 2.6), and the physical conditions that are derived for the formation of their emission lines. Ultimately, the analysis supports the possibility of identifying a virial broadening estimator from low-ionization line widths, and the conceptual validity of the redshift-independent luminosity estimates based on virial broadening for a known luminosity-to-mass ratio.Comment: 13 pages, 5 figures. Invited lecture at SPIG 2018, Belgrade. To appear in Ato

Black hole mass estimates in quasars - A comparative analysis of high- and low-ionization lines

The inter-line comparison between high- and low-ionization emission lines has yielded a wealth of information on the quasar broad line region (BLR) structure and dynamics, including perhaps the earliest unambiguous evidence in favor of a disk + wind structure in radio-quiet quasars. We carried out an analysis of the CIV 1549 and Hbeta line profiles of 28 Hamburg-ESO high luminosity quasars and of 48 low-z, low luminosity sources in order to test whether the high-ionization line CIV 1549 width could be correlated with Hbeta and be used as a virial broadening estimator. We analyze intermediate- to high-S/N, moderate resolution optical and NIR spectra covering the redshifted CIV and H$\beta$ over a broad range of luminosity log L ~ 44 - 48.5 [erg/s] and redshift (0 - 3), following an approach based on the quasar main sequence. The present analysis indicates that the line width of CIV 1549 is not immediately offering a virial broadening estimator equivalent to H$\beta$. At the same time a virialized part of the BLR appears to be preserved even at the highest luminosities. We suggest a correction to FWHM(CIV) for Eddington ratio (using the CIV blueshift as a proxy) and luminosity effects that can be applied over more than four dex in luminosity. Great care should be used in estimating high-L black hole masses from CIV 1549 line width. However, once corrected FWHM(CIV) values are used, a CIV-based scaling law can yield unbiased MBH values with respect to the ones based on H$\beta$ with sample standard deviation ~ 0.3 dex.Comment: 43 pages, 15 Figures, submitted to A&

Detailed Analysis of Balmer Lines in a Sloan Digital Sky Survey Sample of 90 Broad Line Active Galactic Nuclei

In order to contribute to the general effort aiming at the improvement of our knowledge about the physical conditions within the Broad Line Region (BLR) of Active Galactic Nuclei (AGN), here we present the results achieved by our analysis of the spectral properties of a sample of 90 broad line emitting sources, collected at the Sloan Digital Sky Survey (SDSS) database. By focusing our attention mainly onto the Balmer series of hydrogen emission lines, which is the dominant feature in the optical wavelength range of many BLR spectra, we extracted several flux and profile measurements, which we related to other source properties, such as optical continuum luminosities, inferred black hole masses, and accretion rates. Using the Boltzmann Plot method to investigate the Balmer line flux ratios as a function of the line profiles, we found that broader line emitting AGN typically have larger H_alpha / H_beta and smaller H_gamma / H_beta and H_delta / H_beta line ratios. With the help of some recent investigations, we model the structure of the BLR and we study the influence of the accretion process on the properties of the BLR plasma.Comment: 14 pages, 11 figures, fixes the wrong names of 4 objects; published on Ap

A Three-dimensional Printed Low-cost Anterior Shoulder Dislocation Model for Ultrasound-guided Injection Training.

Anterior shoulder dislocations are the most common, large joint dislocations that present to the emergency department (ED). Numerous studies support the use of intraarticular local anesthetic injections for the safe, effective, and time-saving reduction of these dislocations. Simulation training is an alternative and effective method for training compared to bedside learning. There are no commercially available ultrasound-compatible shoulder dislocation models. We utilized a three-dimensional (3D) printer to print a model that allows the visualization of the ultrasound anatomy (sonoanatomy) of an anterior shoulder dislocation. We utilized an open-source file of a shoulder, available from embodi3D® (Bellevue, WA, US). After approximating the relative orientation of the humerus to the glenoid fossa in an anterior dislocation, the humerus and scapula model was printed with an Ultimaker-2 Extended+ 3D® (Ultimaker, Cambridge, MA, US) printer using polylactic acid filaments. A 3D model of the external shoulder anatomy of a live human model was then created using Structure Sensor®(Occipital, San Francisco, CA, US), a 3D scanner. We aligned the printed dislocation model of the humerus and scapula within the resultant external shoulder mold. A pourable ballistics gel solution was used to create the final shoulder phantom. The use of simulation in medicine is widespread and growing, given the restrictions on work hours and a renewed focus on patient safety. The adage of see one, do one, teach one is being replaced by deliberate practice. Simulation allows such training to occur in a safe teaching environment. The ballistic gel and polylactic acid structure effectively reproduced the sonoanatomy of an anterior shoulder dislocation. The 3D printed model was effective for practicing an in-plane ultrasound-guided intraarticular joint injection. 3D printing is effective in producing a low-cost, ultrasound-capable model simulating an anterior shoulder dislocation. Future research will determine whether provider confidence and the use of intraarticular anesthesia for the management of shoulder dislocations will improve after utilizing this model

The Line Emission Region in III Zw 2: Kinematics and Variability

We have studied the Ly-al, Hbeta, Halpha and Mg II2798 line profiles of the Seyfert 1 galaxy III Zw 2. The shapes of these broad emission lines show evidence of a multicomponent origin and also features which may be identified as the peaks due to a rotating disk. We have proposed a two-component Broad Line Region (BLR) model consisting of an inner Keplerian relativistic disk and an outer structure surrounding the disk. The results of the fitting of the four Broad Emission Lines (BELs) here considered, are highly consistent in both the inner and outer component parameters. Adopting a mass of approx. 2 E8 sollar masses for the central object we found that the outer radius of the disk is approximately equal for the four considered lines (approx 0.01 pc). However, the inner radius of the disk is not the same: 0.0018 pc for Ly-alpha, 0.0027 pc for Mg II, and 0.0038 pc for the Balmer lines. This as well as the relatively broad component present in the blue wings of the narrow [OIII] lines indicate stratification in the emission-line region. Using long-term Hbeta observations (1972-1990, 1998) we found a flux variation of the BEL with respect to the [OIII] lines.Comment: ApJ, accepted, 22 pages, 10 figure

Contribution of a Disk Component to Single Peaked Broad Lines of Active Galactic Nuclei

We study the disk emission component hidden in the single-peaked Broad Emission Lines (BELs) of Active Galactic Nuclei (AGN). We compare the observed broad lines from a sample of 90 Seyfert 1 spectra taken from the Sloan Digital Sky Survey with simulated line profiles. We consider a two-component Broad Line Region (BLR) model where an accretion disk and a surrounding non-disk region with isotropic cloud velocities generate the simulated BEL profiles. The analysis is mainly based in measurements of the full widths (at 10%, 20% and 30% of the maximum intensity) and of the asymmetries of the line profiles. Comparing these parameters for the simulated and observed H$\alpha$ broad lines, we {found} that the hidden disk emission {may} be present in BELs even if the characteristic {of two peaked line profiles is} absent. For the available sample of objects (Seyfert 1 galaxies with single-peaked BELs), our study indicates that, {in the case of the hidden disk emission in single peaked broad line profiles}, the disk inclination tends to be small (mostly $i<25^\circ$) and that the contribution of the disk emission to the total flux should be smaller than the contribution of the surrounding region.Comment: 18 Figures, 1 Table, MNRAS-accepted. MNRAS-accepte