The Necessity of Using Heparin in an UltraTag™ RBC Kit when Tagging Blood for a Nuclear Medicine Study

The purpose of this research was to evaluate the need to use heparin when preparing an UltraTag red blood cell (RBC) kit for a nuclear medicine study. Methods: Nonheparinized blood samples (n = 15) and heparinized blood samples (n = 15) were added to UltraTag RBC kits. The samples were examined for macroscopic blood clotting and microscopic platelet clumping. As a control, samples with heparin (n = 15) and without heparin (n = 15) were used to help evaluate the effectiveness of the anticoagulant properties within the UltraTag RBC kit (sodium citrate) and whether those properties played a role in preventing clots or clumps. To detect clotting, the wooden applicator stick method was used. To detect clumping, blood smears were evaluated using a light microscope. The two samples were compared for presence of clots and clumps. Fisher exact testing was used to evaluate the significance of the data. Results: For the UltraTag RBC group, 2 of the 15 nonheparinized samples clotted and none of the 15 heparinized samples clotted; for the control group, 2 of the 15 nonheparinized samples clotted and none of the 15 heparinized samples clotted. For the Ultra-Tag RBC group, 3 of the 15 nonheparinized samples clumped and 3 of the 15 heparinized samples clumped; for the control group, 15 of the 15 nonheparinized samples clumped and 10 of the 15 heparinized samples clumped. Conclusion: When heparin is not used, the Ultra-Tag RBC kit is more likely to form clots. Heparin should always be used when preparing an Ultra-Tag RBC kit for a nuclear medicine study

Ti alloy with enhanced machinability in UAT turning

Metastable β-titanium alloys such as Ti 15V 3Al 3Cr 3Sn are of great technological interest thanks to their high fatigue strength-to-density ratio. However, their high hardness and poor machinability increase machining costs. Additionally, formation of undesirable long chips increases the machining time. To address those issues, a metastable β-titanium alloy (Ti 15V 3Al 3Cr 2Zr 0.9La) with enhanced machinability was developed to produce short chips even at low cutting speeds. A hybrid ultrasonically assisted machining technique, known to reduce cutting forces, was employed in this study. Cutting force components and surface quality of the finished work-pieces were analyzed for a range of cutting speeds in comparison with those for more traditional Ti 15V 3Al 3Cr 3Sn. The novel alloy demonstrated slightly improved machining characteristics at higher cutting speeds and is now ready for industrial applications

Tests DiaForce® Dünnschichtsensorik auf Unterlegscheibengrundkörpern

Versuch und Auswertung - Inbetriebnahme neuartiger Kraftmesstechnik an Steuerstangen von Hubschraubersversuchsmodellen. Bei Belastung erfolgt eine Widerstandsänderung der speziellen Beschichtung des Sensorträgers