Low Noise and High Photodetection Probability SPAD in 180 nm Standard CMOS Technology

A square shaped, low noise and high photo-response single photon avalanche diode suitable for circuit integration, implemented in a standard CMOS 180 nm high voltage technology, is presented. In this work, a p+ to shallow n-well junction was engineered with a very smooth electric field profile guard ring to attain a photo detection probability peak higher than 50% with a median dark count rate lower than 2 Hz/μm2 when operated at an excess bias of 4 V. The reported timing jitter full width at half maximum is below 300 ps for 640 nm laser pulses

Early QCD measurements with ATLAS

This paper describes some of the QCD measurements that ATLAS will make using data from the Large Hadron Collider (LHC). Studies of minimum bias events and the underlying event that can be made with the first LHC data are presented. The determination of the jet energy scale of high Pt jets is discussed

Gluon-induced W-boson pair production at the LHC

Pair production of W bosons constitutes an important background to Higgs boson and new physics searches at the Large Hadron Collider LHC. We have calculated the loop-induced gluon-fusion process gg -> W*W* -> leptons, including intermediate light and heavy quarks and allowing for arbitrary invariant masses of the W bosons. While formally of next-to-next-to-leading order, the gg -> W*W* -> leptons process is enhanced by the large gluon flux at the LHC and by experimental Higgs search cuts, and increases the next-to-leading order WW background estimate for Higgs searches by about 30%. We have extended our previous calculation to include the contribution from the intermediate top-bottom massive quark loop and the Higgs signal process. We provide updated results for cross sections and differential distributions and study the interference between the different gluon scattering contributions. We describe important analytical and numerical aspects of our calculation and present the public GG2WW event generator.Comment: 20 pages, 4 figure

A Comparison of two different jet algorithms for the top mass reconstruction at the LHC

We compare the abilities of the cluster-type jet algorithm, KtJet, and a mid-point iterating cone algorithm to reconstruct the top mass at the LHC. We discuss the information contained in the merging scales of cluster-type algorithms, and how this can be used in experimental analyses, as well as the different sources of systematic errors for the two algorithms. We find that the sources of systematic error are different for the two algorithms, which may help to better constrain the systematic error on the top mass at the LHC.Comment: 21 pages, 16 figures, accepted by JHE

Mapping the depleted area of silicon diodes using a micro-focused X-ray beam

For the Phase-II Upgrade of the ATLAS detector at CERN, the current ATLAS Inner Detector will be replaced with the ATLAS Inner Tracker. The ATLAS Inner Tracker will be an all-silicon detector, consisting of a pixel tracker and a strip tracker. Sensors for the ITk strip tracker are required to have a low leakage current up to bias voltages of -700 V to maintain a low noise and power dissipation. In order to minimise sensor leakage currents, particularly in the high-radiation environment inside the ATLAS detector, sensors are foreseen to be operated at low temperatures and to be manufactured from wafers with a high bulk resistivity of several k{\Omega} cm. Simulations showed the electric field inside sensors with high bulk resistivity to extend towards the sensor edge, which could lead to increased surface currents for narrow dicing edges. In order to map the electric field inside biased silicon sensors with high bulk resistivity, three diodes from ATLAS silicon strip sensor prototype wafers were studied with a monochromatic, micro-focused X-ray beam at the Diamond Light Source. For all devices under investigation, the electric field inside the diode was mapped and its dependence on the applied bias voltage was studied. The findings showed that the electric field in each diode under investigation extended beyond its bias ring and reached the dicing edge

Identification of the Origin of Monojet Signatures at the LHC

Several new physics scenarios can lead to monojet signatures at the LHC. If such events are observed above the Standard Model background it will be important to identify their origin. In this paper we compare and contrast these signatures as produced in two very different pictures: vector or scalar unparticle production in the scale-invariant/conformal regime and graviton emission in the Arkani-Hamed, Dimopoulos and Dvali extra-dimensional model. We demonstrate that these two scenarios can be distinguished at the LHC for a reasonable range of model parameters through the shape of their respective monojet and/or missing $E_T$ distributions.Comment: 17 pages, 6 figs; figure and discussions adde

Higgs Hadroproduction at Large Feynman x

We propose a novel mechanism for the production of the Higgs boson in inclusive hadronic collisions, which utilizes the presence of heavy quarks in the proton wave function. In these inclusive reactions the Higgs boson acquires the momenta of both the heavy quark and antiquark and thus carries 80% or more of the projectile's momentum. We predict that the cross section ${d \sigma/d x_F}(p \bar p \to H X)$ for the inclusive production of the Standard Model Higgs coming from intrinsic bottom Fock states is of order 150 fb at LHC energies, peaking in the region of $x_F \sim 0.9$. Our estimates indicate that the corresponding cross section coming from gluon-gluon fusion at $x_F = 0.9$ is relatively negligible and therefore the peak from intrinsic bottom should be clearly visible for experiments with forward detection capabilities. The predicted cross section for the production of the Standard Model Higgs coming from intrinsic heavy quark Fock states in the proton is sufficiently large that detection at the Tevatron and the LHC may be possible.Comment: 23 pages, 5 figure

Precision electroweak calculation of the production of a high transverse-momentum lepton pair at hadron colliders

We present a detailed study of the production of a high transverse-momentum lepton pair at hadron colliders, which includes the exact O(alpha) electroweak corrections properly matched with leading logarithmic effects due to multiple photon emission, as required by the experiments at the Fermilab Tevatron and the CERN LHC. Numerical results for the relevant observables of single Z-boson production at hadron colliders are presented. The impact of the radiative corrections is discussed in detail. The presence in the proton of a photon density is considered and the effects of the photon-induced partonic subprocesses are analyzed. The calculation has been implemented in the new version of the event generator HORACE, which is available for precision simulations of the neutral and charged current Drell-Yan processes.Comment: October 2007, 22p