Numerical analysis of the hydrodynamic behaviour of immiscible metallic alloys in twin-screw rheomixing process

A numerical analysis by a VOF method is presented for studying the hydrodynamic mechanisms of the rheomixing process by a twin-screw extruder (TSE). The simplified flow field is established based on a systematic analysis of flow features of immiscible alloys in TSE rheomixing process. The studies focus on the fundamental microstructure mechanisms of rheological behaviour in shear-induced turbulent flows. It is noted that the microstructure of immiscible alloys in the mixing process is strongly influenced by the interaction between droplets, which is controlled by shearing forces, viscosity ratio, turbulence, and shearing time. The numerical results show a good qualitative agreement with the experimental results, and are useful for further optimisation design of prototypical rheomixing processes

DC Spin Current Generation in a Rashba-type Quantum Channel

We propose and demonstrate theoretically that resonant inelastic scattering (RIS) can play an important role in dc spin current generation. The RIS makes it possible to generate dc spin current via a simple gate configuration: a single finger-gate that locates atop and orients transversely to a quantum channel in the presence of Rashba spin-orbit interaction. The ac biased finger-gate gives rise to a time-variation in the Rashba coupling parameter, which causes spin-resolved RIS, and subsequently contributes to the dc spin current. The spin current depends on both the static and the dynamic parts in the Rashba coupling parameter, $\alpha_0$ and $\alpha_1$, respectively, and is proportional to $\alpha_0 \alpha_1^2$. The proposed gate configuration has the added advantage that no dc charge current is generated. Our study also shows that the spin current generation can be enhanced significantly in a double finger-gate configuration.Comment: 4 pages,4 figure

Properties of Resonating-Valence-Bond Spin Liquids and Critical Dimer Models

We use Monte Carlo simulations to study properties of Anderson's resonating-valence-bond (RVB) spin-liquid state on the square lattice (i.e., the equal superposition of all pairing of spins into nearest-neighbor singlet pairs) and compare with the classical dimer model (CDM). The latter system also corresponds to the ground state of the Rokhsar-Kivelson quantum dimer model at its critical point. We find that although spin-spin correlations decay exponentially in the RVB, four-spin valence-bond-solid (VBS) correlations are critical, qualitatively like the well-known dimer-dimer correlations of the CDM, but decaying more slowly (as $1/r^a$ with $a \approx 1.20$, compared with $a=2$ for the CDM). We also compute the distribution of monomer (defect) pair separations, which decay by a larger exponent in the RVB than in the CDM. We further study both models in their different winding number sectors and evaluate the relative weights of different sectors. Like the CDM, all the observed RVB behaviors can be understood in the framework of a mapping to a "height" model characterized by a gradient-squared stiffness constant $K$. Four independent measurements consistently show a value $K_{RVB} \approx 1.6 K_{CDM}$, with the same kinds of numerical evaluations of $K_{CDM}$ give results in agreement with the rigorously known value $K_{CDM}=\pi/16$. The background of a nonzero winding number gradient $W/L$ introduces spatial anisotropies and an increase in the effective K, both of which can be understood as a consequence of anharmonic terms in the height-model free energy, which are of relevance to the recently proposed scenario of "Cantor deconfinement" in extended quantum dimer models. We also study ensembles in which fourth-neighbor (bipartite) bonds are allowed, at a density controlled by a tunable fugacity, resulting (as expected) in a smooth reduction of K.Comment: 26 pages, 21 figures. v3: final versio

Hydrodynamic Analysis of Binary Immiscible Metallurgical Flow in a Novel Mixing Process: Rheomixing

This paper presents a hydrodynamic analysis of binary immiscible metallurgical flow by a numerical simulation of the rheomixing process. The concept of multi-controll is proposed for classifying complex processes and identifying individual processes in an immiscible alloy system in order to perform simulations. A brief review of fabrication methods for immiscible alloys is given, and fluid flow aspects of a novel fabrication method – rheomixing by twin-screw extruder (TSE) are analysed. Fundamental hydrodynamic micro-mechanisms in a TSE are simulated by a piecewise linear (PLIC) volume-of-fluid (VOF) method coupled with the continuum surface force (CFS) algorithm. This revealed that continuous reorientation in the TSE process could produce fine droplets and the best mixing efficiency. It is verified that TSE is a better mixing device than single screw extruder (SSE) and can achieve finer droplets. Numerical results show good qualitative agreement with experimental results. It is concluded that rheomixing by a TSE can be successfully employed for casting immiscible engineering alloys due to its unique characteristics of reorientation and surface renewal

Optical properties of Si/Si0.87Ge0.13 multiple quantum well wires

Nanometer-scale wires cut into a Si/Si0.87Ge0.13 multiple quantum well structure were fabricated and characterized by using photoluminescence and photoreflectance at temperatures between 4 and 20 K. It was found that, in addition to a low-energy broadband emission at around 0.8 eV and other features normally observable in photoluminescence measurements, fabrication process induced strain relaxation and enhanced electron-hole droplets emission together with a new feature at 1.131 eV at 4 K were observed. The latter was further identified as a transition related to impurities located at the Si/Si0.87Ge0.13 heterointerfaces

AC Oscillation of a Spin Soliton Driven by a Constant Force

The phenomena of AC oscillation generated by a DC drive, such as the famous Josephson AC effect in superconductors and Bloch oscillation in solid physics, are of great interest in physics. Here we report another example of such counter-intuitive phenomenon that a spin soliton in a two-component Bose-Einstein condensate is driven by a constant force: The initially static spin soliton first moves in a direction opposite to the force and then changes direction, showing an extraordinary AC oscillation in a long term. In sharp contrast to the Josephson AC effect and Bloch oscillation, we find that the nonlinear interactions play important roles and the spin soliton can exhibit a periodic transition between negative and positive inertial mass even in the absence of periodic potentials. We then develop an explicit quasiparticle model that can account for this extraordinary oscillation satisfactorily. Important implications and possible applications of our finding are discussed.Comment: 9 pages, 6 figure

Effects of mutual excitations in the fusion of carbon isotopes

Fusion data for $^{13}$C+$^{13}$C, $^{12}$C+$^{13}$C and $^{12}$C+$^{12}$C are analyzed by coupled-channels calculations that are based on the M3Y+repulsion, double-folding potential. The fusion is determined by ingoing-wave-boundary conditions (IWBC) that are imposed at the minimum of the pocket in the entrance channel potential. Quadrupole and octupole transitions to low-lying states in projectile and target are included in the calculations, as well as mutual excitations of these states. The effect of one-neutron transfer is also considered but the effect is small in the measured energy regime. It is shown that mutual excitations to high-lying states play a very important role in developing a comprehensive and consistent description of the measurements. Thus the shapes of the calculated cross sections for $^{12}$C+$^{13}$C and $^{13}$C+$^{13}$C are in good agreement with the data. The fusion cross sections for $^{12}$C+$^{12}$C determined by the IWBC are generally larger than the measured cross sections but they are consistent with the maxima of some of the observed peak cross sections. They are therefore expected to provide an upper limit for the extrapolation into the low-energy regime of interest to astrophysics.Comment: 34 pages, 17 figure

Production mechanisms and single-spin asymmetry for kaons in high energy hadron-hadron collisions

Direct consequences on kaon production of the picture proposed in a recent Letter and subsequent publications are discussed. Further evidence supporting the proposed picture is obtained. Comparison with the data for the inclusive cross sections in unpolarized reactions is made. Quantitative results for the left-right asymmetry in single-spin processes are presented.Comment: 10 pages, 2 Postscript figure