Niobium hyperfine structure in crystal calcium tungstate

A study of the niobium hyperfine structure in single crystal calcium tungstate was made by the combination of the technique of electron paramagnetic resonance and electron nuclear double resonance (EPR/ENDOR). The microwave frequency was about 9.4 GHz and the radio frequency from 20MHz to 70 MHz. The rare earth ions Nd(3+), U(3+), or Tm(3+) were added as the charge compensator for Nb(5+). To create niobium paramagnetic centers, the sample was irradiated at 77 deg K with a 10 thousand curie Co-60 gamma source for 1 to 2 hours at a dose rate of 200 K rads per hour and then transferred quickly into the cavity. In a general direction of magnetic field, the spectra showed 4 sets of 10 main lines corresponding to 4 nonequivalent sites of niobium with I = 9/2. These 4 sets of lines coalesced into 2 sets of 10 in the ab-plane and into a single set of 10 along the c-axis. This symmetry suggested that the tungsten ions are substituted by the niobium ions in the crystal

Microbial Air Contamination in an Intensive Care Unit

Unit layout affects every aspect of intensive care services, including patient safety. A previous study has shown that patients admitted to beds adjacent to the sink and to the door of a large bayroom had the highest number of positive blood cultures and the highest blood culture incidence density, respectively. The present study measures microbial air contamination in a medical intensive care unit of a medical center in central Taiwan. Of the 17 rooms, 8 rooms with distinct physical environmental characteristics were selected. Sampling tests were conducted between December 2013 and February 2014 with a microbial air sampler (MAS-100NT). TSA was used for bacteria collection and DG18 for fungi collection. The overall average bacterial and fungal concentrations were 83CFU/m3 and 69CFU/m3, respectively. The ranges were between 8-354 CFU/m3 and 0-1468 CFU/m3, respectively. A significant difference was found in the bacterial concentration (p=.005) between different room locations. The highest concentration was found in the rooms located at the front end of the circulation (99 CFU/m3), while the lowest was found in the rooms located at the rear end of the circulation (55CFU/m3). Differences in fungal concentrations for different room locations did not reach statistical significance. In addition, differences in bacterial and fungal concentrations for rooms with different sink locations did not reach statistical significance. Even though the microbial concentrations generally complied with standards, the results may help designers and hospital administrators develop a healthier environment for patients

Jet array impingement flow distributions and heat transfer characteristics. Effects of initial crossflow and nonuniform array geometry

Two-dimensional arrays of circular air jets impinging on a heat transfer surface parallel to the jet orifice plate are considered. The jet flow, after impingement, is constrained to exit in a single direction along the channel formed by the jet orifice plate and the heat transfer surface. The configurations considered are intended to model those of interest in current and contemplated gas turbine airfoil midchord cooling applications. The effects of an initial crossflow which approaches the array through an upstream extension of the channel are considered. Flow distributions as well as heat transfer coefficients and adiabatic wall temperatures resolved to one streamwise hole spacing were measured as a function of the initial crossflow rate and temperature relative to the jet flow rate and temperature. Both Nusselt number profiles and dimensionless adiabatic wall temperature (effectiveness) profiles are presented and discussed. Special test results which show a significant reduction of jet orifice discharge coefficients owing to the effect of a confined crossflow are also presented, along with a flow distribution model which incorporates those effects. A nonuniform array flow distribution model is developed and validated

Learning to be sociable: the evolution of homo economicus

“This is a pre-print of an article published in American Journal of Economics and Sociology, Vol. 67 (2), pp 265 - 286". Author's draftThis article studies the evolution of the economic man (Homo economicus) from its original conception until the current day. By analyzing the discourse of economic articles, we provide a chronological account of the economic man's intellectual and philosophical development as it evolved from what we term the philosophical age to the neoclassical age and finally to the strategic age. The article then shows how the economic man in the strategic age is slowly finding convergence with the sociological man (Homo sociologicus). A reconciliation of the two sapiens is difficult. However, recent papers on behavioral and experimental economics provide insights into a possible reconciliation. Our study argues that the purpose of the sociological man is to identify who he is, how he interacts with people within a society, and the antecedents to such behaviors. Homo economicus, however, has no overarching philosophical assumptions on what he values. The objectives of each discipline are different and, once one is mapped onto the other, it is unclear if there is truly any tension between them

Production of large-particle-size monodisperse latexes

The research program achieved two objectives: (1) it has refined and extended the experimental techniques for preparing monodisperse latexes in quantity on the ground up to a particle diameter of 10 microns; and (2) it has demonstrated that a microgravity environment can be used to grow monodisperse latexes to larger sizes, where the limitations in size have yet to be defined. The experimental development of the monodisperse latex reactor (MLR) and the seeded emulsion polymerizations carried out in the laboratory prototype of the flight hardware, as a function of the operational parameters is discussed. The emphasis is directed towards the measurement, interpretation, and modeling of the kinetics of seeded emulsion polymerization and successive seeded emulsion polymerization. The recipe development of seeded emulsion polymerization as a function of particle size is discussed. The equilibrium swelling of latex particles with monomers was investigated both theoretically and experimentally. Extensive studies are reported on both the type and concentration of initiators, surfactants, and inhibitors, which eventually led to the development of the flight recipes. The experimental results of the flight experiments are discussed, as well as the experimental development of inhibition of seeded emulsion polymerization in terms of time of inhibition and the effect of inhibitors on the kinetics of polymerization

Salient collinear grouping diminishes local salience in visual search: An eye movement study

SCI Impact Factor(2011)=2.417[[abstract]]Our eyes and attention are easily attracted to salient items in search displays. When a target is spatially overlapped with a salient distractor (overlapping target), it is usually detected more easily than when it is not (nonoverlapping target). Jingling and Tseng (2013), however, found that a salient distractor impaired visual search when the distractor was comprised of more than nine bars collinearly aligned to each other. In this study, we examined whether this search impairment is due to reduction of salience on overlapping targets. We used the short-latency saccades as an index for perceptual salience. Results showed that a long collinear distractor decreases perceptual salience of local overlapping targets in comparison to nonoverlapping targets, reflected by a smaller proportion of the short-latency saccades. Meanwhile, a salient noncollinear distractor increases salience of overlapping targets. Our results led us to conclude that a long collinear distractor diminishes the perceptual salience of the target, a factor which poses a counter-intuitive condition in which a target on a salient region becomes less salient. We discuss the possible causes for our findings, including crowding, the global precedence effect, and the filling-in of a collinear contour.[[notice]]補正完畢[[incitationindex]]SCI[[ispeerreviewed]]Y[[booktype]]電子版[[countrycodes]]US

Exclusive Hadronic D Decays to eta' and eta

Hadronic decay modes $D^0\to(\bar K^0, \bar K^{*0})\eta,\eta'$ and $(D^+,D_s^+)\to(\pi^+,\rho^+)\eta,\eta'$ are studied in the generalized factorization approach. Form factors for $(D,D_s^+)\to(\eta,\eta')$ transitions are carefully evaluated by taking into account the wave function normalization of the eta and eta'. The predicted branching ratios are generally in agreement with experiment except for $D^0\to\bar K^0\eta', D^+\to\pi^+\eta$ and $D_s^+\to\rho^+\eta'$; the calculated decay rates for the first two decay modes are too small by an order of magnitude. We show that the weak decays $D^0\to K^-\pi^+$ and $D^+\to K^+\bar K^0$ followed by resonance-induced final-state interactions (FSI), which are amenable technically, are able to enhance the branching ratios of $D^0\to\bar K^0\eta'$ and $D^+\to\pi^+\eta$ dramatically without affecting the agreement between theory and experiment for $D^0\to\bar K^0\eta$ and $D^+\to\pi^+\eta'$. We argue that it is difficult to understand the observed large decay rates of $D_s^+\to \rho^+\eta'$ and $\rho^+\eta$ simultaneously; FSI, W-annihilation and the production of excess eta' from gluons are not helpful in this regard. The large discrepancy between the factorization hypothesis and experiment for the ratio of $D_s^+\to\rho^+ \eta'$ and $D_s^+\to\eta' e^+\nu$ remains as an enigma.Comment: 15 pages, 1 figure, to appear in Phys. Rev. D. Form factors for D to eta and eta' transitions are slightly change

Method of making counterrotating aircraft propeller blades

An aircraft propeller blade is constructed by forming two shells of composite material laminates and bonding the two shells to a metallic spar with foam filler pieces interposed between the shells at desired locations. The blade is then balanced radially and chordwise