Process for the leaching of AP from propellant

A method for the recovery of ammonium perchlorate from waste solid rocket propellant is described wherein shredded particles of the propellant are leached with an aqueous leach solution containing a low concentration of surface active agent while stirring the suspension

Variations in propagation delay times for line ten (TV) based time transfers

Variation in the propagation delay for a 30 km TV (Line Ten) radio link was evaluated for a series of 30 independent measurements. Time marks from TV Channel 5 WTTG in Washington, D.C. were simultaneously measured at the Johns Hopkins University Applied Physics Laboratory and at the United States Naval Observatory against each stations' local cesium standard clocks. Differences in the stations' cesium clocks were determined by portable cesium clock transfers. Thirty independent timing determinations were made. The root mean square deviation in the propagation delay calculated from the timing determinations was 11 ns. The variations seen in the propagation delays are believed to be caused by environmental factors and by errors in the portable clock timing measurements. In correlating the propagation delay variations with local weather conditions, only a moderate dependence on air temperature and absolute humidity was found

On the Miura and Backlund transformations associated with the supersymmetric Gelfand-Dickey bracket

The supersymmetric version of the Miura and B\"acklund transformations associated with the supersymmetric Gelfand-Dickey bracket are investigated from the point of view of the Kupershmidt-Wilson theorem.Comment: 8 pages, Revtex, version to appear on Mod. Phys. Lett.

Investigating Automatic Static Analysis Results to Identify Quality Problems: an Inductive Study

Background: Automatic static analysis (ASA) tools examine source code to discover "issues", i.e. code patterns that are symptoms of bad programming practices and that can lead to defective behavior. Studies in the literature have shown that these tools find defects earlier than other verification activities, but they produce a substantial number of false positive warnings. For this reason, an alternative approach is to use the set of ASA issues to identify defect prone files and components rather than focusing on the individual issues. Aim: We conducted an exploratory study to investigate whether ASA issues can be used as early indicators of faulty files and components and, for the first time, whether they point to a decay of specific software quality attributes, such as maintainability or functionality. Our aim is to understand the critical parameters and feasibility of such an approach to feed into future research on more specific quality and defect prediction models. Method: We analyzed an industrial C# web application using the Resharper ASA tool and explored if significant correlations exist in such a data set. Results: We found promising results when predicting defect-prone files. A set of specific Resharper categories are better indicators of faulty files than common software metrics or the collection of issues of all issue categories, and these categories correlate to different software quality attributes. Conclusions: Our advice for future research is to perform analysis on file rather component level and to evaluate the generalizability of categories. We also recommend using larger datasets as we learned that data sparseness can lead to challenges in the proposed analysis proces

Fine-scale analysis of biomineralized mollusc teeth using FIB and TEM

When it comes to mineral synthesis, there is a lot we can learn from nature. Although we can synthesize a range of materials in the laboratory, the experimental conditions are often constrained to particular ranges of temperature, pH, etc. Biological systems, on the other hand, seem to be able to produce individual minerals and complex composite mineral structures under a variety of conditions, many of which are far from those applied to create their synthetic counterparts. Understanding how nature does this could provide a means to produce novel biomimetic materials with potential applications in a diverse range of fields from medicine to materials engineering

Metric half-span model support system

A model support system used to support a model in a wind tunnel test section is described. The model comprises a metric, or measured, half-span supported by a nonmetric, or nonmeasured half-span which is connected to a sting support. Moments and forces acting on the metric half-span are measured without interference from the support system during a wind tunnel test

Issues of alcohol misuse among older people : attitudes and experiences of social work practitioners

This small-scale qualitative research focused on the experiences of social workers vis--vis older people who misuse alcohol. Based in an Older People's Team in the west of Scotland, the study explored service provision for alcohol misuse and examined whether practitioners felt the existing services provided by the Substance Misuse Team were effective in meeting the needs of older people with an alcohol problem. Using semi-structured interviews, data were collected from 18 participants, the majority (14) of whom were female and whose ages ranged from 31 to 54 years. Several key themes emerged including the extent of alcohol problems among older people and the complex reasons that cause older people to misuse alcohol. These reasons commonly related to the increasing challenges of old age. The data also demonstrated that current services are not meeting the needs of older people. Practitioners identified a need for an 'age-specific' approach to target more effectively the complex needs of older people. Recommendations from practitioners included ways to develop new and more effective services, including a more age-specific service, such as providing longer term support in older people's own homes, using a specialised support worker, and increasing staff training on alcohol use among older people

Formation of Nickel-Platinum Silicides on a Silicon Substrate: Structure, Phase Stability, and Diffusion from Ab initio Computations

The formation of Ni(Pt)silicides on a Si(001) surface is investigated using an ab initio approach. After deposition of a Ni overlayer alloyed with Pt, the calculations reveal fast diffusion of Ni atoms into the Si lattice, which leads initially to the formation of Ni2Si. At the same time Si atoms are found to diffuse into the metallic overlayer. The transformation of Ni2Si into NiSi is likely to proceed via a vacancy-assisted diffusion mechanism. Silicon atoms are the main diffusing species in this transformation, migrating from the Si substrate through the growing NiSi layer into the Ni2Si. Pt atoms have a low solubility in Ni2Si and prefer Si-sites in the NiSi lattice, thereby stabilizing the NiSi phase. The diffusivity of Pt is lower than that of Ni. Furthermore, Pt atoms have a tendency to segregate to interfaces, thereby acting as diffusion barriers.Comment: 36 pages, 9 tables, 6 figure

An In Depth Study into Using EMI Signatures for Appliance Identification

Energy conservation is a key factor towards long term energy sustainability. Real-time end user energy feedback, using disaggregated electric load composition, can play a pivotal role in motivating consumers towards energy conservation. Recent works have explored using high frequency conducted electromagnetic interference (EMI) on power lines as a single point sensing parameter for monitoring common home appliances. However, key questions regarding the reliability and feasibility of using EMI signatures for non-intrusive load monitoring over multiple appliances across different sensing paradigms remain unanswered. This work presents some of the key challenges towards using EMI as a unique and time invariant feature for load disaggregation. In-depth empirical evaluations of a large number of appliances in different sensing configurations are carried out, in both laboratory and real world settings. Insights into the effects of external parameters such as line impedance, background noise and appliance coupling on the EMI behavior of an appliance are realized through simulations and measurements. A generic approach for simulating the EMI behavior of an appliance that can then be used to do a detailed analysis of real world phenomenology is presented. The simulation approach is validated with EMI data from a router. Our EMI dataset - High Frequency EMI Dataset (HFED) is also released