Mechanism of enhanced light output in InGaN-based microlight emitting diodes

Micro-light emitting diode (LED) arrays with diameters of 4 to 20 mum have been fabricated and were found to be much more efficient light emitters compared to their broad-area counterparts, with up to five times enhancement in optical power densities. The possible mechanisms responsible for the improvement in performance were investigated. Strain relaxation in the microstructures as measured by Raman spectroscopy was not observed, arguing against theories of an increase in internal quantum efficiency due to a reduction of the piezoelectric field put forward by other groups. Optical microscope images show intense light emission at the periphery of the devices, as a result of light scattering off the etched sidewalls. This increases the extraction efficiency relative to broad area devices and boosts the forward optical output. In addition, spectra of the forward emitted light reveal the presence of resonant cavity modes [whispering gallery (WG) modes in particular] which appear to play a role in enhancing the optical output

Nonmonotonic behavior of resistance in a superconductor-Luttinger liquid junction

Transport through a superconductor-Luttinger liquid junction is considered. When the interaction in the Luttinger liquid is repulsive, the resistance of the junction with a sufficiently clean interface shows nonmonotonic temperature- or voltage-dependence due to the competition between the superconductivity and the repulsive interaction. The result is discussed in connection with recent experiments on single-wall carbon nanotubes in contact with superconducting leads.Comment: Revtex4, 2 eps figure files, slightly revised from an earlier version submitted to PRL on 2001.12.

Anomalous Light Scattering by Topological PT{\mathcal{PT}}-symmetric Particle Arrays

Robust topological edge modes may evolve into complex-frequency modes when a physical system becomes non-Hermitian. We show that, while having negligible forward optical extinction cross section, a conjugate pair of such complex topological edge modes in a non-Hermitian $\mathcal{PT}$-symmetric system can give rise to an anomalous sideway scattering when they are simultaneously excited by a plane wave. We propose a realization of such scattering state in a linear array of subwavelength resonators coated with gain media. The prediction is based on an analytical two-band model and verified by rigorous numerical simulation using multiple-multipole scattering theory. The result suggests an extreme situation where leakage of classical information is unnoticeable to the transmitter and the receiver when such a $\mathcal{PT}$-symmetric unit is inserted into the communication channel.Comment: 16 pages, 8 figure

InGaN nano-ring structures for high-efficiency light emitting diodes

A technique based on the Fresnel diffraction effect for the fabrication of nano-scale site-controlled ring structures in InGaN/GaN multi-quantum well structures has been demonstrated. The ring structures have an internal diameter of 500 nm and a wall width of 300 nm. A 1 cm-1 Raman shift has been measured, signifying substantial strain relaxation from the fabricated structure. The 9 nm blueshift observed in the cathodoluminescence spectra can be attributed to band filling and/or screening of the piezoelectric field. A light emitting diode based on this geometry has been demonstrated

Processing of carbon-fiber-reinforced Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 bulk metallic glass composites

Carbon-fiber-reinforced bulk metallic glass composites are produced by infiltrating liquid Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 into carbon fiber bundles with diameter of the individual fiber of 5 mum. Reactive wetting occurs by the formation of a ZrC layer around the fibers. This results in a composite with a homogeneous fiber distribution. The volume fraction of the fibers is about 50% and the density of the composite amounts to 4.0 g/cm(^3)

Ku-band system design study and TDRSS interface analysis

The capabilities of the Shuttle/TDRSS link simulation program (LinCsim) were expanded to account for radio frequency interference (RFI) effects on the Shuttle S-band links, the channel models were updated to reflect the RFI related hardware changes, the ESTL hardware modeling of the TDRS communication payload was reviewed and evaluated, in LinCsim the Shuttle/TDRSS signal acquisition was modeled, LinCsim was upgraded, and possible Shuttle on-orbit navigation techniques was evaluated

MgB2 superconducting thin films with a transition temperature of 39 Kelvin

We report the growth of high-quality c-axis-oriented epitaxial MgB2 thin films by using a pulsed laser deposition technique. The thin films grown on (1`1 0 2) Al2O3 substrates show a Tc of 39 K. The critical current density in zero field is ~ 6 x 10^6 A/cm2 at 5 K and ~ 3 x 10^5 A/cm^2 at 35 K, suggesting that this compound has great potential for electronic device applications, such as microwave devices and superconducting quantum interference devices. For the films deposited on Al2O3, X-ray diffraction patterns indicate a highly c-axis-oriented crystal structure perpendicular to the substrate surface.Comment: 3 pages and 3 figure