Process for the leaching of AP from propellant

A method for the recovery of ammonium perchlorate from waste solid rocket propellant is described wherein shredded particles of the propellant are leached with an aqueous leach solution containing a low concentration of surface active agent while stirring the suspension

Optimal redesign study of the harm wing

The purpose of this project was to investigate the use of optimization techniques to improve the flutter margins of the HARM AGM-88A wing. The missile has four cruciform wings, located near mid-fuselage, that are actuated in pairs symmetrically and antisymmetrically to provide pitch, yaw, and roll control. The wings have a solid stainless steel forward section and a stainless steel crushed-honeycomb aft section. The wing restraint stiffness is dependent upon wing pitch amplitude and varies from a low value near neutral pitch attitude to a much higher value at off-neutral pitch attitudes, where aerodynamic loads lock out any free play in the control system. The most critical condition for flutter is the low-stiffness condition in which the wings are moved symmetrically. Although a tendency toward limit-cycle flutter is controlled in the current design by controller logic, wing redesign to improve this situation is attractive because it can be accomplished as a retrofit. In view of the exploratory nature of the study, it was decided to apply the optimization to a wing-only model, validated by comparison with results obtained by Texas Instruments (TI). Any wing designs that looked promising were to be evaluated at TI with more complicated models, including body modes. The optimization work was performed by McIntosh Structural Dynamics, Inc. (MSD) under a contract from TI

Benefit Transfer in the Field: Measuring the Benefits of Heterogeneous Wetlands using Contingent Valuation and Ecological Field Appraisals

Wetlands have functional values that may extend beyond traditional real estate values. This paper uses contingent valuation and ecological field assessments to place heterogeneous values on heterogeneous wetlands. Wetland functions evaluated are water quality, habitat, recreation, storing floodwaters and erosion abatement. The model used incorporates the public value of wetland functions and adds that value to the common local appraisal cost. We use a “percentage willingness-to-pay” value elicitation question in which respondents are asked about the percentage amount that the state government should pay over and above market value to purchase and preserve a wetland function. These values are then mapped into an ecological matrix to value the wetland as a whole. We show how these values can be applied in the field. Key Words: wetlands, appraisal, evaluation, mitigation, contingent valuation methodLength:

Prehension and perception of size in left visual neglect

Right hemisphere damaged patients with and without left visual neglect, and age-matched controls had objects of various sizes presented within left or right body hemispace. Subjects were asked to estimate the objects’ sizes or to reach out and grasp them, in order to assess visual size processing in perceptual-experiential and action-based contexts respectively. No impairments of size processing were detected in the prehension performance of the neglect patients but a generalised slowing of movement was observed, associated with an extended deceleration phase. Additionally both patient groups reached maximum grip aperture relatively later in the movement than did controls. For the estimation task it was predicted that the left visual neglect group would systematically underestimate the sizes of objects presented within left hemispace but no such abnormalities were observed. Possible reasons for this unexpected null finding are discussed

Static aeroelastic analysis and tailoring of missile control fins

A concept for enhancing the design of control fins for supersonic tactical missiles is described. The concept makes use of aeroelastic tailoring to create fin designs (for given planforms) that limit the variations in hinge moments that can occur during maneuvers involving high load factors and high angles of attack. It combines supersonic nonlinear aerodynamic load calculations with finite-element structural modeling, static and dynamic structural analysis, and optimization. The problem definition is illustrated. The fin is at least partly made up of a composite material. The layup is fixed, and the orientations of the material principal axes are allowed to vary; these are the design variables. The objective is the magnitude of the difference between the chordwise location of the center of pressure and its desired location, calculated for a given flight condition. Three types of constraints can be imposed: upper bounds on static displacements for a given set of load conditions, lower bounds on specified natural frequencies, and upper bounds on the critical flutter damping parameter at a given set of flight speeds and altitudes. The idea is to seek designs that reduce variations in hinge moments that would otherwise occur. The block diagram describes the operation of the computer program that accomplishes these tasks. There is an option for a single analysis in addition to the optimization

Integration-Valuation Nexus in Invasive Species Policy

This paper reviews recent work examining two topics of economic research vital for invasive species policy-integration and valuation. Integration requires bioeconomic models that blend invasive biology with economic circumstances and the feedback loops between the two systems. Valuation requires nonmarket valuation associated with human and environmental damages posed by invasive species. We argue for a second-level of integration in invasive species economics-valuation based on integration models. Policy prescriptions based on integration models need valuation work; valuation surveys need integration models-the two are complements. Valuation could be enhanced with integration in mind; integration could be made better with valuation in mind. An example from blending the two research areas is presented and its merits demonstrated.invasive species, integrated economic-ecological modeling, nonmarket valuation, Environmental Economics and Policy,

LEADING INDICATORS OF REGIONAL COTTON ACREAGE RESPONSE: STRUCTURAL AND TIME SERIES MODELING RESULTS

Resurgent cotton production compels better acreage forecasts for planning seed, chemical, and other input requirements. Structural models describe leading acreage response indicators, and forecasts are compared to time-series models. Cotton price, loan rate, deficiency payments, lagged corn acreage, the PIK program, and previous cotton yield significantly influence cotton acreage response.resurgent cotton production, cotton acreage, Crop Production/Industries,