Comparative transcriptomics enlarges the toolkit of known developmental genes in mollusks

Data used for the phylogenetic analysis of Hox and ParaHox genes, including the respective GenBank accession numbers. (DOC 31 kb

Measurement Of Quasiparticle Transport In Aluminum Films Using Tungsten Transition-Edge Sensors

We report new experimental studies to understand the physics of phonon sensors which utilize quasiparticle diffusion in thin aluminum films into tungsten transition-edge-sensors (TESs) operated at 35 mK. We show that basic TES physics and a simple physical model of the overlap region between the W and Al films in our devices enables us to accurately reproduce the experimentally observed pulse shapes from x-rays absorbed in the Al films. We further estimate quasiparticle loss in Al films using a simple diffusion equation approach.Comment: 5 pages, 6 figures, PRA

Expression, purification and in vitro biological activity from human recombinant BMP-2 produced by a novel approach

Bone morphogenetic proteins have promoted great biomedical interest due to their ability in inducing new bone formation when used as powerful osteoinductive components of several late-stage bone grafting products. Recombinant human bone morphogenetic protein-2 (rhBMP-2) is obtained from mammalian cell expressing systems in low amounts or from bacteria inclusion bodies after timeconsuming refolding methods. Thus, there is a need to establish novel approaches for producing rhBMP-2 in high yields by simple and cheap procedures.Portuguese Foundation for Science and Technolog y, FCT (PhD Grant to PC Bessa , SFRH/BD/17049/2004). This work was also partially supported by the European STREP HIPPOCRATES (NMP3 - CT - 2003 - 505758) and carried out under the scope of European NoE EXPERTISSUES (NMP3 - CT - 2004 - 500283).info:eu-repo/semantics/publishedVersio

Bifurcation Boundary Conditions for Switching DC-DC Converters Under Constant On-Time Control

Sampled-data analysis and harmonic balance analysis are applied to analyze switching DC-DC converters under constant on-time control. Design-oriented boundary conditions for the period-doubling bifurcation and the saddle-node bifurcation are derived. The required ramp slope to avoid the bifurcations and the assigned pole locations associated with the ramp are also derived. The derived boundary conditions are more general and accurate than those recently obtained. Those recently obtained boundary conditions become special cases under the general modeling approach presented in this paper. Different analyses give different perspectives on the system dynamics and complement each other. Under the sampled-data analysis, the boundary conditions are expressed in terms of signal slopes and the ramp slope. Under the harmonic balance analysis, the boundary conditions are expressed in terms of signal harmonics. The derived boundary conditions are useful for a designer to design a converter to avoid the occurrence of the period-doubling bifurcation and the saddle-node bifurcation.Comment: Submitted to International Journal of Circuit Theory and Applications on August 10, 2011; Manuscript ID: CTA-11-016

Expression, purification and in vitro biological activity from human recombinant BMP-2 produced by a novel approach

Bone tissue engineering has been an increasing field of research during the last years. The ideal approach for a regenerative application would consist in the use of cells from the patient, scaffolding materials and differentiation growth factors. Bone morphogenetic protein-2 (BMP-2) is one such growth factors with a strong ability to induce new bone and cartilage formation and has been used as a powerful osteoinductive component of several late-stage tissue engineering products for bone grafting. In this work, we aimed at obtaining high yields of human recombinant BMP-2 in a stable, pure and biologically active form by use of a new bacteria expression system that circumvents the disadvantages of conventional recombinant protein preparation methods and to perform a study of the stability conditions and functionality of these peptides in vitro in human mesenchymal stem cells and C2C12 murine cell line.Portuguese Foundation for Science and Technology, FCT (PhD Grant to PC Bessa, to PC Bessa, SFRH/BD/17049/2004 SFRH/BD/17049/2004 ). This work was ). This work was also partially supported by the European STREP HIPPOCRATES (NMP3 also partially supported by the European STREP HIPPOCRATES (NMP3--CTCT--2003 2003--505758) and carried out under the scope of 505758) and carried out under the scope of European NoE EXPERTISSUES (NMP3 European NoE EXPERTISSUES (NMP3--CTCT- -2004 2004 --500283). 500283info:eu-repo/semantics/publishedVersio

Comparison of nanoparticular hydroxyapatite pastes of different particle content and size in a novel scapula defect model

Nanocrystalline hydroxyapatite (HA) has good biocompatibility and the potential to support bone formation. It represents a promising alternative to autologous bone grafting, which is considered the current gold standard for the treatment of low weight bearing bone defects. The purpose of this study was to compare three bone substitute pastes of different HA content and particle size with autologous bone and empty defects, at two time points (6 and 12 months) in an ovine scapula drillhole model using micro-CT, histology and histomorphometry evaluation. The nHA-LC (38% HA content) paste supported bone formation with a high defect bridging-rate. Compared to nHA-LC, Ostim(®) (35% HA content) showed less and smaller particle agglomerates but also a reduced defect bridging-rate due to its fast degradation The highly concentrated nHA-HC paste (48% HA content) formed oversized particle agglomerates which supported the defect bridging but left little space for bone formation in the defect site. Interestingly, the gold standard treatment of the defect site with autologous bone tissue did not improve bone formation or defect bridging compared to the empty control. We concluded that the material resorption and bone formation was highly impacted by the particle-specific agglomeration behaviour in this study

A novel system for producing human recombinant BMP-2 and study of the growth factor stabilizing conditions

Bone tissue engineering has been an increasing field of research during the last years. The ideal approach for a regenerative application would consist in the use of cells from the patient, scaffolding materials and differentiation growth factors. Bone morphogenetic protein-2 (BMP-2) is one such growth factors with a strong ability to induce new bone and cartilage formation and has been used as a powerful osteoinductive component of several late-stage tissue engineering products for bone grafting. In this work, we aimed at obtaining high yields of human recombinant BMP-2 in a stable, pure and biologically active form by use of a new bacteria expression system that circumvents the disadvantages of conventional recombinant protein preparation methods and to perform a study of the stability conditions and the functionality of these peptides in vitro in human mesenchymal stem cells and C2C12 murine cell line.Portuguese Foundation for Science and Technology (PhD Grant to PC Bessa, SFRH/BD/17049/2004). This work was also partially supported by the European STREP HIPPOCRATES (NMP3-CT-2003-505758) and carried out under the scope of European NoE EXPERTISSUES (NMP3-CT-2004- 500283).info:eu-repo/semantics/publishedVersio

Silk fibroin microparticles as carriers for delivery of human recombinant bone morphogenetic protein-2 : in vitro and in vivo bioactivity

The in vitro and in vivo efficiency of fibroin microparticles as a delivery carrier for bone morphogenetic protein-2 (BMP-2) was evaluated. BMP-2 was encapsulated in silk fibroin particles that were produced by a simple and very mild processing method. The dose-response of BMP-2-loaded fibroin particles was examined in C2C12 cells, after 5 days of culture. The BMP-2 retained most of its activity as observed by the increase in alkaline phosphatase activity, which was much higher when BMP-2 was encapsulated into the particles rather than just surface-adsorbed. After 2 weeks of culture, increased mineralization was observed with BMP-2-loaded particles in comparison to soluble added growth factor. No significant cytotoxicity was detected. When implanted in a rat ectopic model, bone formation was observed by in vivo micro-computed tomography after 2 and 4 weeks postimplantation, with particles loaded with 5 or 12.5 microg BMP-2. An increase in bone density was observed over time. Histology revealed further evidence of ectopic bone formation, observed by strong alizarin red staining and osteocalcin immunostaining. Our findings show that fibroin microparticles may present an interesting option for future clinical applications in the bone tissue engineering field, and therefore, further studies have been planned.The authors acknowledge Anna Hofmann and Anna Khadem for additional help with some experiments, and Karin Brenner for animal maintenance. This work was supported by Fundacao para a Ciencia e Tecnologia (Ph.D. grant SFRH/BD/17049/2004), project ElastM (POCI/CTM/57177/2004 funded by FEDER and the Fundacao para a Ciencia e Tecnologia), Marie Curie Alea Jacta EST short-term grant (MEST-CT-2004-8104), and European STREP Project HIP-POCRATES (NMP3-CT-2003-505758). This work was carried out under the scope of the European NoE EXPERTISSUES (NMP3-CT-2004-500283)

A novel approach for the production of human recombinant BMP-2 for bone tissue engineering applications

Bone tissue engineering has been an increasing field of research during the last years. The ideal approach for a regenerative application would consist in the use of cells from the patient, scaffolding materials and differentiation growth factors. Bone morphogenetic protein-2 (BMP-2) is one such growth factors with a strong ability to induce new bone and cartilage formation and has been used as a powerful osteoinductive component of several late-stage tissue engineering products for bone grafting. In this work, we aimed at obtaining high yields of human recombinant BMP-2 in a stable, pure and biologically active form by use of a new bacteria expression system that circumvents the disadvantages of conventional recombinant protein preparation methods and to perform a study of the stability conditions and the functionality of these peptides in vitro in human mesenchymal stem cells and C2C12 murine cell line.info:eu-repo/semantics/publishedVersio