Plasma-Enhanced ALD of TiO2 Thin Films on SUS 304 Stainless Steel for Photocatalytic Application

Plasma-enhanced atomic layer deposition (PE-ALD) of TiO2 thin films using Ti(NMe2)(4) [tetrakis(dimethylamido) Ti] and O-2 plasma were prepared on stainless steel to show the self-cleaning effect. The TiO2 thin films deposited on stainless steel have high growth rate, large surface roughness, and low impurities. The film deposited below 200 degrees C was amorphous, while the films deposited at 300 and 400 degrees C showed anatase and rutile phases, respectively. The contact angle measurements on crystalline PE-ALD TiO2 thin films exhibited superhydrophilicity after UV irradiation. The TiO2 thin film with anatase phase deposited at 300 degrees C showed the highest photocatalytic efficiency, which is higher than on Activ glass or thermal ALD TiO2 films. We suggest that anatase structure and large surface area of TiO2 thin film on stainless steel are the main factors for the high photocatalytic efficiency. (C) 2009 The Electrochemical Society. [DOI: 10.1149/1.3095515] All rights reserved.X117sciescopu

A new modelling approach of evaluating preventive and reactive strategies for mitigating supply chain risks

Supply chains are becoming more complex and vulnerable due to globalization and interdependency between different risks. Existing studies have focused on identifying different preventive and reactive strategies for mitigating supply chain risks and advocating the need for adopting specific strategy under a particular situation. However, current research has not addressed the issue of evaluating an optimal mix of preventive and reactive strategies taking into account their relative costs and benefits within the supply network setting of interconnected firms and organizations. We propose a new modelling approach of evaluating different combinations of such strategies using Bayesian belief networks. This technique helps in determining an optimal solution on the basis of maximum improvement in the network expected loss. We have demonstrated our approach through a simulation study and discussed practical and managerial implications

Effect of soaking of seeds in potassium silicate and uniconazole on germination and seedling growth of tomato cultivars, Seogeon and Seokwang

Experiments were conducted to investigate the effects of soaking seeds in potassium silicate and uniconazole on seed germination and seedling growth of two tomato cultivars. Tomato (Lycopersicum esculentum Mill. ‘Seogeon and Seokwang’) seeds were put in a Petri dish filled with 15 ml of a solutions containing either 50 or 100 mg L-1 potassium silicate or uniconazole and were placed in an environment controlled chamber (25°C, 80% RH, dark) for 12 or 24 h. After the soaking treatment, seeds were washed in distilled water and were dried in a growth chamber (25°C, 80% RH, and in the dark) for 4 h. Seeds were sown in 288-cell (11 cc) plug trays containing a Tosilee medium and trays were layed out in a randomized complete block design on beds in a glasshouse. A nutrient solution was supplied uniformly for all treatments once a day through a sub-irrigation system. Soaking seeds in potassium silicate or uniconazole solution reduced germination percentage in both cultivars when compared to the control. In both cultivars, soaking treatment of uniconazole significantly reduced length of stem, hypocotyls, internode, leaf area and dry weight of stem and root, as compared to the control and other treatments. Root length increased significantly in all treatments when compared with the control. Hypocotyl length and plant height of 'Seogeon' seedlings were suppressed in the 100 mg L-1 potassium silicate treatment as compared to the control and water soaking. In contrast, height of ‘Seokwang’ seedlings increased by potassium silicate treatment. The chlorophyll fluorescence ratio (Fv/Fm) increased by low concentration of uniconazole treatment as compared to the control and other treatments. The growth of tomato seedlings was efficiently regulated by uniconazole 50 mg L-1 (12 h soaking) treatment.Key words: Chlorophyll fluorescence, plant growth retardants, plug plants, potassium silicate, seed treatment, silicon, uniconazole

Search for new phenomena in final states with an energetic jet and large missing transverse momentum in pp collisions at √ s = 8 TeV with the ATLAS detector

Results of a search for new phenomena in final states with an energetic jet and large missing transverse momentum are reported. The search uses 20.3 fb−1 of √ s = 8 TeV data collected in 2012 with the ATLAS detector at the LHC. Events are required to have at least one jet with pT > 120 GeV and no leptons. Nine signal regions are considered with increasing missing transverse momentum requirements between Emiss T > 150 GeV and Emiss T > 700 GeV. Good agreement is observed between the number of events in data and Standard Model expectations. The results are translated into exclusion limits on models with either large extra spatial dimensions, pair production of weakly interacting dark matter candidates, or production of very light gravitinos in a gauge-mediated supersymmetric model. In addition, limits on the production of an invisibly decaying Higgs-like boson leading to similar topologies in the final state are presente

Sulforaphane promotes ER stress, autophagy and cell death: implications for cataract surgery

Posterior capsule opacification (PCO) commonly develops following cataract surgery and is a wound-healing response that can ultimately lead to secondary visual loss. Improved management of this problem is required. The isothiocyanate, sulforaphane (SFN) is reported to exert cytoprotective and cytotoxic actions and the latter may be exploited to treat/prevent PCO. SFN concentrations of 10µM and above significantly impaired wound-healing in a human lens capsular bag model. A similar pattern of response was also seen with a human lens cell line, FHL124. SFN treatment promoted increased expression of ER stress genes, which also corresponded with protein expression. Evidence of autophagy was observed in response to SFN as determined by increased LC3-II levels and detection of autophagic vesicles. This response was disrupted by established autophagy inhibitors chloroquine and 3-MA. SFN was found to promote MAPK signaling and inhibition of ERK activation using U0126 prevented SFN induced LC3-II elevation and vesicle formation. SFN also significantly increased levels of reactive oxygen species. Taken together, our findings suggest that SFN is capable of reducing lens cell growth and viability and thus could serve as a putative therapeutic agent for PCO

Initial Characterization of the FlgE Hook High Molecular Weight Complex of

The spirochete periplasmic flagellum has many unique attributes. One unusual characteristic is the flagellar hook. This structure serves as a universal joint coupling rotation of the membrane-bound motor to the flagellar filament. The hook is comprised of about 120 FlgE monomers, and in most bacteria these structures readily dissociate to monomers (∼ 50 kDa) when treated with heat and detergent. However, in spirochetes the FlgE monomers form a large mass of over 250 kDa [referred to as a high molecular weight complex (HMWC)] that is stable to these and other denaturing conditions. In this communication, we examined specific aspects with respect to the formation and structure of this complex. We found that the Lyme disease spirochete Borrelia burgdorferi synthesized the HMWC throughout the in vitro growth cycle, and also in vivo when implanted in dialysis membrane chambers in rats. The HMWC was stable to formic acid, which supports the concept that the stability of the HMWC is dependent on covalent cross-linking of individual FlgE subunits. Mass spectrometry analysis of the HMWC from both wild type periplasmic flagella and polyhooks from a newly constructed ΔfliK mutant indicated that other proteins besides FlgE were not covalently joined to the complex, and that FlgE was the sole component of the complex. In addition, mass spectrometry analysis also indicated that the HMWC was composed of a polymer of the FlgE protein with both the N- and C-terminal regions remaining intact. These initial studies set the stage for a detailed characterization of the HMWC. Covalent cross-linking of FlgE with the accompanying formation of the HMWC we propose strengthens the hook structure for optimal spirochete motility

2D versus 3D human induced pluripotent stem cell-derived cultures for neurodegenerative disease modelling

Neurodegenerative diseases, such as Alzheimer's disease (AD), Parkinson's disease (PD), Huntington's disease (HD) and amyotrophic lateral sclerosis (ALS), affect millions of people every year and so far, there are no therapeutic cures available. Even though animal and histological models have been of great aid in understanding disease mechanisms and identifying possible therapeutic strategies, in order to find disease-modifying solutions there is still a critical need for systems that can provide more predictive and physiologically relevant results. One possible avenue is the development of patient-derived models, e.g. by reprogramming patient somatic cells into human induced pluripotent stem cells (hiPSCs), which can then be differentiated into any cell type for modelling. These systems contain key genetic information from the donors, and therefore have enormous potential as tools in the investigation of pathological mechanisms underlying disease phenotype, and progression, as well as in drug testing platforms. hiPSCs have been widely cultured in 2D systems, but in order to mimic human brain complexity, 3D models have been proposed as a more advanced alternative. This review will focus on the use of patient-derived hiPSCs to model AD, PD, HD and ALS. In brief, we will cover the available stem cells, types of 2D and 3D culture systems, existing models for neurodegenerative diseases, obstacles to model these diseases in vitro, and current perspectives in the field

QCD and strongly coupled gauge theories : challenges and perspectives

We highlight the progress, current status, and open challenges of QCD-driven physics, in theory and in experiment. We discuss how the strong interaction is intimately connected to a broad sweep of physical problems, in settings ranging from astrophysics and cosmology to strongly coupled, complex systems in particle and condensed-matter physics, as well as to searches for physics beyond the Standard Model. We also discuss how success in describing the strong interaction impacts other fields, and, in turn, how such subjects can impact studies of the strong interaction. In the course of the work we offer a perspective on the many research streams which flow into and out of QCD, as well as a vision for future developments.Peer reviewe

Measurements of integrated and differential cross sections for isolated photon pair production in pp collisions at √s=8 TeV with the ATLAS detector

A measurement of the production cross section for two isolated photons in proton-proton collisions at a center-of-mass energy of √s=8 TeV is presented. The results are based on an integrated luminosity of 20.2 fb−1 recorded by the ATLAS detector at the Large Hadron Collider. The measurement considers photons with pseudorapidities satisfying |ηγ|40GeV and EγT,2>30 GeV for the two leading photons ordered in transverse energy produced in the interaction. The background due to hadronic jets and electrons is subtracted using data-driven techniques. The fiducial cross sections are corrected for detector effects and measured differentially as a function of six kinematic observables. The measured cross section integrated within the fiducial volume is 16.8 ± 0.8  pb . The data are compared to fixed-order QCD calculations at next-to-leading-order and next-to-next-to-leading-order accuracy as well as next-to-leading-order computations including resummation of initial-state gluon radiation at next-to-next-to-leading logarithm or matched to a parton shower, with relative uncertainties varying from 5% to 20%