109 research outputs found
Electrically active defects in polycrystalline and single crystal metal halide perovskite
We studied electrically active defects in CsPbBr3 polycrystalline films and single crystals samples using the thermally stimulated currents (TSC) technique in the temperature range 100–400 K. Below room temperature, both polycrystalline and single-crystals TSC emission is composed by a quasi-continuum of energy levels in the range 0.1–0.3 eV, and capture cross sections ~10−21 cm2. Above room temperature, TSC analysis reveals the presence of defect states in the range 0.40–0.52 eV only in polycrystalline samples, whereas these intermediate energy states are absent in TSC detected in single crystals. In polycrystalline films, the occupancy changes of an energy level at 0.45 eV strongly influences the room temperature photoconductivity, giving rise to slow transients due to defect passivation. In single-crystals, where intermediate energy states are absent, the photoconductivity response during illumination is almost stable and characterized by fast rise/decay times, a promising result for future applications of this material in photodetection and dosimetry
Electrical and Optical Characterization of CsPbCl3 Films around the High-Temperature Phase Transitions
Large-area CsPbCl(3) films in the range 0.1–1.5 μm have been grown by radio frequency (RF)-magnetron sputtering on glass substrates by means of a one-step procedure. Three structural phase transitions have been detected, which are associated with hysteresis behavior in the electrical current when measured as a function of temperature in the range 295–330 K. Similarly, photoluminescence (PL) experiments in the same temperature range bring evidence of a non-monotonic shift of the PL peak. Detailed electrical characterizations evidenced how phase transitions are not influencing detrimentally the electrical transport properties of the films. In particular, the activation energy (0.6–0.8 eV) extracted from the temperature-dependent film resistivity does not appear to be correlated with phase changes. A non-linear trend of the photoconductivity response as a function of a ultra violet (UV) 365 nm light emitting diode (LED) power has been interpreted considering the presence of an exponential tail of intragap defects. Thermally stimulated currents after exposure with the same LED measured from room temperature up to 370 K showed no evidence of trapping effects due to intragap states on the electrical transport properties at room temperature of the films. As a consequence, measured photocurrents at room temperature appear to be well reproducible and stable in time, which are attractive features for possible future applications in photodetection
Palladium oxide nanoparticles: Preparation, characterization and catalytic activity evaluation
Stable palladium oxide nanoparticles were prepared in aqueous suspension with a very simple procedure, by dissolving palladium nitrate in water at a concentration around 10-4 M. UV-visible absorption spectroscopy was adopted to follow the formation of these nanoparticles, which were characterized by TEM microscopy, along with XRD, XPS and Raman measurements. DFT calculations allowed to interpret the Raman data and to clarify the species present at the surface of the nanoparticles. The catalytic activity of the latter was evaluated by monitoring the reduction of p-nitrophenol to p-aminophenol. This investigation paves the way to the use of these colloidal nanoparticles in processes of heterogeneous catalysis, in particular those concerning the catalytic degradation of aromatic derivatives that represent a serious danger for the environment as pollutants, as in the case of p-nitrophenol
Bioaccumulation of total mercury in the earthworm Eisenia andrei
Earthworms are a major part of the total biomass of soil fauna and play a vital role
in soil maintenance. They process large amounts of plant and soil material and can
accumulate many pollutants that may be present in the soil. Earthworms have been
explored as bioaccumulators for many heavy metal species such as Pb, Cu and Zn but
limited information is available for mercury uptake and bioaccumulation in earth-
worms and very few report on the factors that influence the kinetics of Hg uptake by
earthworms. It is known however that the uptake of Hg is strongly influenced by the
presence of organic matter, hence the influence of ligands are a major factor contribut
-
ing to the kinetics of mercury uptake in biosystems. In this work we have focused on
the uptake of mercury by earthworms (
Eisenia andrei
) in the presence of humic acid
(HA) under varying physical conditions of pH and temperature, done to assess the role
of humic acid in the bioaccumulation of mercury by earthworms from soils. The study
was conducted over a 5-day uptake period and all earthworm samples were analysed
by direct mercury analysis. Mercury distribution profiles as a function of time, bioac-
cumulation factors (BAFs), first order rate constants and body burden constants for
mercury uptake under selected conditions of temperature, pH as well as via the dermal
and gut route were evaluated in one comprehensive approach. The results showed
that the uptake of Hg was influenced by pH, temperature and the presence of HA.
Uptake of Hg
2
+
was improved at low pH and temperature when the earthworms in
soil were in contact with a saturating aqueous phase. The total amount of Hg
2
+
uptake
decreased from 75 to 48
% as a function of pH. For earthworms in dry soil, the uptake
was strongly influenced by the presence of the ligand. Calculated BAF values ranged
from 0.1 to 0.8. Mercury uptake typically followed first order kinetics with rate constants
determined as 0.2 to 1
h
?
1
.Scopus 201
USE OF GOLD AND PLATINUM MOD INKS FOR LUXURY BRANDS: A SUSTAINABLE WAY TO MANUFACTURE FASHION ITEMS APPLICAZIONE DI INCHIOSTRI METALLORGANICI DI PLATINO ED ORO PER L’INDUSTRIA DELLA MODA: UNA SCELTA SOSTENBILE PER OGGETTI DI LUSSO
First proof-of-principle of inorganic lead halide perovskites deposition by magnetron-sputtering
The present work reports the application of RF-magnetron sputtering technique to realize CsPbBr 3 70 nm thick films on glass substrate by means of a one-step procedure. The obtained films show highly uniform surface morphology and homogeneous thickness as evidenced by AFM and SEM investigations. XRD measurements demonstrate the presence of two phases: a dominant orthorhombic CsPbBr 3 and a subordinate CsPb 2 Br 5 . Finally, XPS data reveals surface bromine depletion respect to the stoichiometrical CsPbBr 3 composition, nevertheless photoluminescence spectroscopy results confirm the formation of a highly luminescent film. These preliminary results demonstrate that our approach could be of great relevance for easy fabrication of large area perovskite thin films. Future developments, based on this approach, may include the realization of multijunction solar cells and multicolor light emitting devices
Characterization of the Response of Magnetron Sputtered In2O3−x Sensors to NO2
The response of resistive In2O3−x sensing devices was investigated as a function of the NO2 concentration in different operative conditions. Sensing layers are 150 nm thick films manufactured by oxygen-free room temperature magnetron sputtering deposition. This technique allows for a facile and fast manufacturing process, at same time providing advantages in terms of gas sensing performances. The oxygen deficiency during growth provides high densities of oxygen vacancies, both on the surface, where they are favoring NO2 absorption reactions, and in the bulk, where they act as donors. This n-type doping allows for conveniently lowering the thin film resistivity, thus avoiding the sophisticated electronic readout required in the case of very high resistance sensing layers. The semiconductor layer was characterized in terms of morphology, composition and electronic properties. The sensor baseline resistance is in the order of kilohms and exhibits remarkable performances with respect to gas sensitivity. The sensor response to NO2 was studied experimentally both in oxygen-rich and oxygen-free atmospheres for different NO2 concentrations and working temperatures. Experimental tests revealed a response of 32%/ppm at 10 ppm NO2 and response times of approximately 2 min at an optimal working temperature of 200 °C. The obtained performance is in line with the requirements of a realistic application scenario, such as in plant condition monitoring
The control of reproductive physiology and behavior by gonadotropin-inhibitory hormone
Gonadotropin-releasing hormone (GnRH) controls the reproductive physiology and behavior of vertebrates by stimulating synthesis and release of gonadotropin from the pituitary gland. In 2000, another hypothalamic neuropeptide, gonadotropin-inhibitory hormone (GnIH), was discovered in quail and found to be an inhibiting factor for gonadotropin release. GnIH homologs are present in the brains of vertebrates, including birds, mammals, amphibians, and fish. These peptides, categorized as RF amide-related peptides (RFRPs), possess a characteristic LPXRF-amide (X = L or Q) motif at their C-termini. GnIH/RFRP precursor mRNA encodes a polypeptide that is possibly cleaved into three mature peptides in birds and two in mammals. The names of these peptides are GnIH, GnIH-related peptide-1 (GnIH-RP-1) and GnIH-RP-2 in birds, and RFRP-1 and RFRP-3 in mammals. GnIH/RFRP is synthesized in neurons of the paraventricular nucleus of the hypothalamus in birds and the dorsomedial hypothalamic area in mammals. GnIH neurons project to the median eminence, thus providing a functional neuroanatomical infrastructure to regulate anterior pituitary function. In quail, GnIH inhibits gonadal activity by decreasing synthesis and release of gonadotropin. The widespread distribution of GnIH/RFRP immunoreactive fibers in all animals tested suggests various actions within the brain. In accordance, GnIH/RFRP receptor mRNA is also expressed widely in the brain and the pituitary. GnIH/RFRP immunoreactive axon terminals are in probable contact with GnRH neurons in birds and mammals, and we recently demonstrated expression of GnIH receptor mRNA in GnRH-I and GnRH-II neurons in European starlings. Thus, GnIH/RFRP may also inhibit gonadotropin synthesis and release by inhibiting GnRH neurons in addition to having direct actions on the pituitary gland. Intracerebroventricular administration of GnIH/RFRP further inhibits reproductive behaviors in songbirds and rodents, possibly via direct actions on the GnRH system. The expression of GnIH/RFRP is regulated by melatonin which is an internal indicator of day length in vertebrates. Stress stimuli also regulate the expression of GnIH/RFRP in songbirds and rodents. Accordingly, GnIH/RFRP may serve as a transducer of environmental information and social interactions into endogenous physiology and behavior of the animal. Recently, it was shown that GnIH/RFRP and its receptor are also expressed in the gonads of birds, rodents and primates. In sum, the existing data suggest that GnIH/RFRP is an important mediator of reproductive function acting at the level of the brain, pituitary, and the gonad in birds and mammals
- …
