1,041 research outputs found
Blind joint maximum likelihood channel estimation and data detection for single-input multiple-output systems
A blind adaptive scheme is proposed for joint maximum likelihood (ML) channel estimation and data detection of single-input multiple-output (SIMO) systems. The joint ML optimization of the channel and data estimation is decomposed into an iterative optimization loop. An efficient global optimization algorithm termed as the repeated weighted boosting aided search is employed first to identify the unknown SIMO channel model, and then the Viterbi algorithm is used for the maximum likelihood sequence estimation of the unknown data sequence. A simulation example is used for demonstrating the efficiency of this joint ML optimization scheme designed for blind adaptive SIMO systems
Space-Time Equalisation Assisted Minimum Bit-Error Ratio Multiuser Detection for SDMA Systems
This contribution investigates a space-time equalisation assisted multiuser detection scheme designed for multiple receiver antenna aided space division multiple access (SDMA) systems. A novel minimum bit error ratio (MBER) design is invoked for the multiuser detector (MUD), which is shown to be capable of improving the attainable performance and enhancing system capacity in comparison to that of the standard minimum mean square error (MMSE) design. The adaptive MUD coefficient adjustment procedure of the MBER space-time MUD is implemented using a stochastic gradient based least bit error rate (LBER) algorithm, which consistently outperforms the classic least mean square (LMS) algorithm, while maintaining a lower computational complexity than the latter
Теоретичні аспекти процесу реструктуризації в умовах антикризового управління
У статті розкрито сутність поняття "реструктуризація", окреслено чинники, які викликають необхідність реструктуризаційних змін, визначено цілі та види реструктуризації, а також запропоновано ряд перспективних напрямів та відповідних заходів її проведення.Essence of concept "restructuring" is exposed in the article, outlined factors which cause the necessity of
restrukturizaciynikh changes, certainly aims and types of restructuring, and also the row of perspective directions
and proper measures of its leadthrough is offered
Exclusion Statistics of Quasiparticles in Condensed States of Composite Fermion Excitations
The exclusion statistics of quasiparticles is found at any level of the
hierarchy of condensed states of composite fermion excitations (for which
experimental indications have recently been found). The hierarchy of condensed
states of excitations in boson Jain states is introduced and the statistics of
quasiparticles is found. The quantum Hall states of charged -anyons
( -- the exclusion statistics parameter) can be described as
incompressible states of -anyons ( -- an even number).Comment: 4 page
Energy, interaction, and photoluminescence of spin-reversed quasielectrons in fractional quantum Hall systems
The energy and photoluminescence spectra of a two-dimensional electron gas in
the fractional quantum Hall regime are studied. The single-particle properties
of reversed-spin quasielectrons (QE's) as well as the
pseudopotentials of their interaction with one another and with Laughlin
quasielectrons (QE's) and quasiholes (QH's) are calculated. Based on the
short-range character of the QE--QE and QE--QE
repulsion, the partially unpolarized incompressible states at the filling
factors and are postulated within Haldane's
hierarchy scheme. To describe photoluminescence, the family of bound
QE states of a valence hole and QE's are
predicted in analogy to the found earlier fractionally charged excitons
QE. The binding energy and optical selection rules for both families are
compared. The QE is found radiative in contrast to the dark QE,
and the QE is found non-radiative in contrast to the bright
QE.Comment: 9 pages, 6 figure
Mass measurements of neutron-deficient Y, Zr, and Nb isotopes and their impact on rp and νp nucleosynthesis processes
© 2018 The Authors. Published by Elsevier B.V. This manuscript is made available under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International licence (CC BY-NC-ND 4.0). For further details please see: https://creativecommons.org/licenses/by-nc-nd/4.0/Using isochronous mass spectrometry at the experimental storage ring CSRe in Lanzhou, the masses of 82Zr and 84Nb were measured for the first time with an uncertainty of ∼10 keV, and the masses of 79Y, 81Zr, and 83Nb were re-determined with a higher precision. The latter are significantly less bound than their literature values. Our new and accurate masses remove the irregularities of the mass surface in this region of the nuclear chart. Our results do not support the predicted island of pronounced low α separation energies for neutron-deficient Mo and Tc isotopes, making the formation of Zr–Nb cycle in the rp-process unlikely. The new proton separation energy of 83Nb was determined to be 490(400) keV smaller than that in the Atomic Mass Evaluation 2012. This partly removes the overproduction of the p-nucleus 84Sr relative to the neutron-deficient molybdenum isotopes in the previous νp-process simulations.Peer reviewe
Multiple superconducting gap and anisotropic spin fluctuations in iron arsenides: Comparison with nickel analog
We present extensive 75As NMR and NQR data on the superconducting arsenides
PrFeAs0.89F0.11 (Tc=45 K), LaFeAsO0.92F0.08 (Tc=27 K), LiFeAs (Tc = 17 K) and
Ba0.72K0.28Fe2As2 (Tc = 31.5 K) single crystal, and compare with the nickel
analog LaNiAsO0.9F0.1 (Tc=4.0 K) . In contrast to LaNiAsO0.9F0.1 where the
superconducting gap is shown to be isotropic, the spin lattice relaxation rate
1/T1 in the Fe-arsenides decreases below Tc with no coherence peak and shows a
step-wise variation at low temperatures. The Knight shift decreases below Tc
and shows a step-wise T variation as well. These results indicate spinsinglet
superconductivity with multiple gaps in the Fe-arsenides. The Fe
antiferromagnetic spin fluctuations are anisotropic and weaker compared to
underdoped copper-oxides or cobalt-oxide superconductors, while there is no
significant electron correlations in LaNiAsO0.9F0.1. We will discuss the
implications of these results and highlight the importance of the Fermi surface
topology.Comment: 6 pages, 11 figure
Dynamic Response Analysis of the Fractional-Order System of MEMS Viscometer
This paper presented dynamic response analysis for an MEMS viscometer. The responses are governed by a set of differential equations containing fractional derivatives. The memory-free Yuan-Agrawal’s approach was extended to solve fractional differential equations containing arbitrary fractional order derivative and then a simple yet efficient numerical scheme was constructed. Numerical examples show that the proposed method can provide very accurate results and computational efforts can be significantly saved. Moreover, the numerical scheme was extended to solve problems with a nonlinear spring. The influences of the nonlinear parameters on the dynamic responses were also efficiently analyzed. The dependence of the angular frequency on damping parameters was also revealed. The presented method can provide us a new perspective to measure the fluid viscosity
Nanoparticle-Induced Unusual Melting and Solidification Behaviours of Metals
Effective control of melting and solidification behaviours of materials is significant for numerous applications. It has been a long-standing challenge to increase the melted zone (MZ) depth while shrinking the heat-affected zone (HAZ) size during local melting and solidification of materials. In this paper, nanoparticle-induced unusual melting and solidification behaviours of metals are reported that effectively solve this long-time dilemma. By introduction of Al(2)O(3) nanoparticles, the MZ depth of Ni is increased by 68%, while the corresponding HAZ size is decreased by 67% in laser melting at a pulse energy of 0.18 mJ. The addition of SiC nanoparticles shows similar results. The discovery of the unusual melting and solidification of materials that contain nanoparticles will not only have impacts on existing melting and solidification manufacturing processes, such as laser welding and additive manufacturing, but also on other applications such as pharmaceutical processing and energy storage
Investigation of Roll-to-Roll Gravure Printing for Printed Electronics with Fine Features
Gravure printing is known to be cost competitive in manufacturing of printed electronic devices due to its capability to mass produce at lower costs. Current standard of gravure printed feature sizes is in a range of around 50 μm down to sub-10 μm, predominantly through small scale setups and specialized engraving. However, reliance on gravure cell design limits the scalability of printing over a large area due to the setup cost. In this study, ink viscoelastic behavior was modified to improve replication of gravure printed features over a large printing area of 300 mm web-width without a reduction in gravure cell dimension. Fine lines were printed using a high viscosity ink with a good replication of the nominal line width. Control over the printed features was performed through the variation of printing speed and the alteration of ink viscosity. The effects of ink viscosity and printing speed on the printed ink particle distribution and size were also examined. New methodologies of characterizing ink transfer were also developed to help understand the ink transfer processes: mass transfer and particle transfer. A deeper understanding of the thixotropic effect and shear recovery behavior of inks was achieved through simulations of shearing conditions
- …
