Redundancy of hydraulic flight control actuators

The constraint of requiring airplanes to have inherent aerodynamic stability can be removed by using active control systems. The resulting airplane requires control system reliability approaching that of the basic airframe. Redundant control actuators can be used to achieve the required reliability, but create mechanization and operational problems. Of numerous candidate systems, two different approaches to solving the problems associated with redundant actuators which appear the most likely to be used in advanced airplane control systems are described

Consumer trust and confidence: Some recent ideas in the literature

This is a post-print version of the article. The official published version can be accessed from the link below - © IWA Publishing 2008This paper reflects on two recent debates in the consumer literature on trust that have implications for consumer relations in the water industry. The first concerns an important yet seldom made distinction between trust and confidence. The second concerns when and how trust is related to acceptance of, for example, new tariffs or new technologies, and it challenges the conventional view that trust is usually a precursor of acceptance. New conceptual models addressing these debates are described and their implications for future water-related consumer research are discussed as are potential implications for industry relationships with consumers

Comparison of consumer attitudes between Cyprus and Latvia: An evaluation of effect of setting on consumer preferences in the water industry

This is the post-print version of the article. The official published version can be obtained from th link below - Copyright @ SpringerModels approaching consumer expectations of their water supplier from a risk perspective suggest that consumers primarily and overwhelmingly want safe drinking water supply. In this study consumer preferences in the water sector are investigated in two contrasting case studies: Cyprus, where there have been significant quantity and continuity of supply issues, and Riga, where there have been water quality issues. While water quality is undoubtedly the main priority of water consumers in Riga, in Cyprus consumers indicate that they prioritise a more reliable service even though many are sufficiently dissatisfied with water quality that they do not drink the tap water. The analysis of consumer attitudes in the two case studies suggests that when water supply is unreliable, reliability takes precedence; once it is reliable quality issues come to the fore.This research was carried out as part of Work Area 6 of the TECHNEAU project, an integrated project funded under FP6 of the European Commission, grant number: 018320

Redundant actuator development program

Two concepts of redundant secondary actuator mechanization, applicable to future advanced flight control systems, were studied to quantitatively assess their design applicability to an AST. The two actuator concepts, a four-channel, force summed system and a three-channel, active/standby system have been developed and evaluated through analysis, analog computer simulation, and piloted motion simulation. The quantitative comparison of the two concepts indicates that the force summed concept better meet performance requirements, although the active/standby is superior in other respects. Both concepts are viable candidates for advanced control application dependent on the specific performance requirements

Initiation mechanisms and kinetics of pyrolysis and combustion of JP-10 hydrocarbon jet fuel

In order to investigate the initiation mechanisms and kinetics associated with the pyrolysis of JP-10 (exo-tricyclo[5.2.1.0^2,6]decane), a single-component hydrocarbon jet fuel, we carried out molecular dynamics (MD) simulations employing the ReaxFF reactive force field. We found that the primary decomposition reactions involve either (1) dissociation of ethylene from JP-10, resulting in the formation of a C8 hydrocarbon intermediate, or (2) the production of two C5 hydrocarbons. ReaxFF MD leads to good agreement with experiment for the product distribution as a function of temperature. On the basis of the rate of consumption of JP-10, we calculate an activation energy of 58.4 kcal/mol for the thermal decomposition of this material, which is consistent with a strain-facilitated C−C bond cleavage mechanism in JP-10. This compares well with the experimental value of 62.4 kcal/mol. In addition, we carried out ReaxFF MD studies of the reactive events responsible for oxidation of JP-10. Here we found overall agreement between the thermodynamic energies obtained from ReaxFF and quantum-mechanical calculations, illustrating the usefulness of ReaxFF for studying oxidation of hydrocarbons. The agreement of these results with available experimental observations demonstrates that ReaxFF can provide useful insights into the complicated thermal decomposition and oxidation processes of important hydrocarbon fuels

ReaxFF Reactive Force Field for Molecular Dynamics Simulations of Hydrocarbon Oxidation

To investigate the initial chemical events associated with high-temperature gas-phase oxidation of hydrocarbons, we have expanded the ReaxFF reactive force field training set to include additional transition states and chemical reactivity of systems relevant to these reactions and optimized the force field parameters against a quantum mechanics (QM)-based training set. To validate the ReaxFF potential obtained after parameter optimization, we performed a range of NVT−MD simulations on various hydrocarbon/O_2 systems. From simulations on methane/O_2, o-xylene/O_2, propene/O_2, and benzene/O_2 mixtures, we found that ReaxFF obtains the correct reactivity trend (propene > o-xylene > methane > benzene), following the trend in the C−H bond strength in these hydrocarbons. We also tracked in detail the reactions during a complete oxidation of isolated methane, propene, and o-xylene to a CO/CO_2/H_2O mixture and found that the pathways predicted by ReaxFF are in agreement with chemical intuition and our QM results. We observed that the predominant initiation reaction for oxidation of methane, propene, and o-xylene under fuel lean conditions involved hydrogen abstraction of the methyl hydrogen by molecular oxygen forming hydroperoxyl and hydrocarbon radical species. While under fuel rich conditions with a mixture of these hydrocarbons, we observed different chemistry compared with the oxidation of isolated hydrocarbons including a change in the type of initiation reactions, which involved both decomposition of the hydrocarbon or attack by other radicals in the system. Since ReaxFF is capable of simulating complicated reaction pathways without any preconditioning, we believe that atomistic modeling with ReaxFF provides a useful method for determining the initial events of oxidation of hydrocarbons under extreme conditions and can enhance existing combustion models

The ReaxFF Monte Carlo Reactive Dynamics Method for Predicting Atomistic Structures of Disordered Ceramics: Application to the Mo_3VO_x Catalyst

The ReaxFF computational approach is used to resolve partial or mixed occupation of crystallographic sites of the Mo_3VO_x multimetal oxide (MMO) catalyst. It provides insight into the oxidation state and coordination environment of the metal sites, identifies donor-acceptor networks in the catalyst, and predicts selectivity for molecular diffusion into channels of the framework

Enhancing the cellular uptake of Py–Im polyamides through next-generation aryl turns

Pyrrole–imidazole (Py–Im) hairpin polyamides are a class of programmable, sequence-specific DNA binding oligomers capable of disrupting protein–DNA interactions and modulating gene expression in living cells. Methods to control the cellular uptake and nuclear localization of these compounds are essential to their application as molecular probes or therapeutic agents. Here, we explore modifications of the hairpin γ-aminobutyric acid turn unit as a means to enhance cellular uptake and biological activity. Remarkably, introduction of a simple aryl group at the turn potentiates the biological effects of a polyamide targeting the sequence 5′-WGWWCW-3′ (W = A/T) by up to two orders of magnitude. Confocal microscopy and quantitative flow cytometry analysis suggest this enhanced potency is due to increased nuclear uptake. Finally, we explore the generality of this approach and find that aryl-turn modifications enhance the uptake of all polyamides tested, while having a variable effect on the upper limit of polyamide nuclear accumulation. Overall this provides a step forward for controlling the intracellular concentration of Py–Im polyamides that will prove valuable for future applications in which biological potency is essential

Simulations on the Thermal Decomposition of a Poly(dimethylsiloxane) Polymer Using the ReaxFF Reactive Force Field

To investigate the failure of the poly(dimethylsiloxane) polymer (PDMS) at high temperatures and pressures and in the presence of various additives, we have expanded the ReaxFF reactive force field to describe carbon−silicon systems. From molecular dynamics (MD) simulations using ReaxFF we find initial thermal decomposition products of PDMS to be CH_3 radical and the associated polymer radical, indicating that decomposition and subsequent cross-linking of the polymer is initiated by Si−C bond cleavage, in agreement with experimental observations. Secondary reactions involving these CH_3 radicals lead primarily to formation of methane. We studied temperature and pressure dependence of PDMS decomposition by following the rate of production of methane in the ReaxFF MD simulations. We tracked the temperature dependency of the methane production to extract Arrhenius parameters for the failure modes of PDMS. Furthermore, we found that at increased pressures the rate of PDMS decomposition drops considerably, leading to the formation of fewer CH_3 radicals and methane molecules. Finally, we studied the influence of various additives on PDMS stability. We found that the addition of water or a SiO_2 slab has no direct effect on the short-term stability of PDMS, but addition of reactive species such as ozone leads to significantly lower PDMS decomposition temperature. The addition of nitrogen monoxide does not significantly alter the degradation temperature but does retard the initial production of methane and C_2 hydrocarbons until the nitrogen monoxide is depleted. These results, and their good agreement with available experimental data, demonstrate that ReaxFF provides a useful computational tool for studying the chemical stability of polymers

Microwave Assisted Synthesis of Py-Im Polyamides

Microwave synthesis was utilized to rapidly build Py-Im polyamides in high yields and purity using Boc-protection chemistry on Kaiser oxime resin. A representative polyamide targeting the 5′-WGWWCW-3′ (W = A or T) subset of the consensus Androgen and Glucocorticoid Response Elements was synthesized in 56% yield after 20 linear steps and HPLC purification. It was confirmed by Mosher amide derivatization of the polyamide that a chiral α-amino acid does not racemize after several additional coupling steps