A density matrix approach to photoinduced electron injection

Electron injection from an adsorbed molecule to the substrate (heterogeneous electron transfer) is studied. One reaction coordinate is used to model this process. The surface phonons and/or the electron-hole pairs together with the internal degrees of freedom of the adsorbed molecule as well as possibly a liquid surrounding the molecule provide a dissipative environment, which may lead to dephasing, relaxation, and sometimes excitation of the relevant system. In the process studied the adsorbed molecule is excited by a light pulse. This is followed by an electron transfer from the excited donor state to the quasi-continuum of the substrate. It is assumed that the substrate is a semiconductor. The effects of dissipation on electron injection are investigated

Stable Ta2O5 Overlayers on Hematite for Enhanced Photoelectrochemical Water Splitting Efficiencies

Hematite (α‐Fe2O3) is one of the most promising photoanodes for water oxidation, however the efficiencies of current hematite materials remain low. Surface trap states are often reported as one of the factors which limit the activity of hematite photoelectrodes, often leading to undesirable surface pinning and trap‐mediated recombination. The deposition of ultra‐thin Al2O3 overlayers is known to enhance hematite activity through passivation of surface states, however Al2O3 is rapidly degraded at normal hematite operating pH values (pH≈13). This study reports atomic layer deposition (ALD) of Ta2O5 thin films as stable, passivating overlayers on a range of hematite photoelectrodes and demonstrates that enhanced activity correlates with observed changes in trap‐state dynamics

Barium iodide single-crystal scintillator detectors

We find that the high-Z crystal Barium Iodide is readily growable by the Bridgman growth technique and is less prone to crack compared to Lanthanum Halides. We have grown Barium Iodide crystals: undoped, doped with Ce{sup 3+}, and doped with Eu{sup 2+}. Radioluminescence spectra and time-resolved decay were measured. BaI{sub 2}(Eu) exhibits luminescence from both Eu{sup 2+} at 420 nm ({approx}450 ns decay), and a broad band at 550 nm ({approx}3 {micro}s decay) that we assign to a trapped exciton. The 550 nm luminescence decreases relative to the Eu{sup 2+} luminescence when the Barium Iodide is zone refined prior to crystal growth. We also describe the performance of BaI{sub 2}(Eu) crystals in experimental scintillator detectors

The Complex Role of Carbon Nitride as a Sensitizer in Photoelectrochemical Cells

The role of carbon nitride (C3N4) as an absorber in a photoelectrochemical cell is reported. C3N4-sensitized TiO2 mesoporous film created via in-situ, vapor-transport growth results in a direct Ti–O–C bonding. The material hybridization shows a unique electronic transition at the interface, leading to strongly enhanced visible-light absorption and photoactivity

Remote Sensing of Alpha and Beta Sources - Modeling Summary

Evaluating the potential for optical detection of the products of interactions of energetic electrons or other particles with the background atmosphere depends on predictions of change in atmospheric concentrations of species which would generate detectable spectral signals within the range of observation. The solar blind region of the spectrum, in the ultra violet, would be the logical band for outdoor detection (see Figure 1). The chemistry relevant to these processes is composed of ion-molecule reactions involving the initially created N{sub 2}{sup +} and O{sub 2}{sup +} ions, and their subsequent interactions with ambient trace atmospheric constituents. Effective modeling of the atmospheric chemical system acted upon by energetic particles requires knowledge of the dominant mechanism that exchange charge and associate it with atmospheric constituents, kinetic parameters of the individual processes (see e.g. Brasseur and Solomon, 1995), and a solver for the coupled differential equations that is accurate for the very stiff set of time constants involved. The LLNL box model, VOLVO, simulates the diel cycle of trace constituent photochemistry for any point on the globe over the wide range of time scales present using a stiff Gear-type ODE solver, i.e. LSODE. It has been applied to problems such as tropospheric and stratospheric nitrogen oxides, stratospheric ozone production and loss, and tropospheric hydrocarbon oxidation. For this study we have included the appropriate ion flux

Performance evaluation of several well-known and new scintillators for MeV X-ray imaging

International audienceDigital X-ray imaging systems for MeV range photon beams are based on a combination of a scintillator screen and either a camera or an amorphous silicon array. To limit dose rate on electronics and enhance imaging device lifetime, the scintillator screen is mirror-coupled to the camera. Performances of such devices are a compromise between exposure time and spatial resolution. These technical characteristics are especially scintillator dependent. In this paper, we present a performance evaluation of six different scintillators with a 9 MeV Bremsstrahlung X-ray source. The tested scintillators are composed of one micro-structured CsI(Tl) scintillator, two phosphor (GOS) screens and three transparent scintillators. These scintillators present a wide range of density, thickness and conversion efficiency. Each scintillator's performance is assessed based on the combination of light output (ADU number) and modulation transfer function (spatial resolution) obtained. The results are helpful to guide design and engineering of high energy imaging devices adapted to specific requirements

Nanoengineered Gd3Al2Ga3O12 Scintillation Materials with Disordered Garnet Structure for Novel Detectors of Ionizing Radiation

The authors are grateful to Baker Hughes a GE Company for support of this activity. This work has also been supported by grant N14.W03.31.0004 from the Government of the Russian Federation.The search for engineering approaches to improve the scintillation properties of Gd3Al2Ga3O12 crystals and enable their production technology is of current interest. This crystal, while doped with Ce, is considered a good multi‐purpose scintillation material for detecting gamma‐quanta and neutrons. It is observed that co‐doping with Mg affected intrinsic defects in the crystal structure that create shallow electronic traps. Other point structure defects, which are based on local variations of the crystal stoichiometry, are significantly diminished by use of a co‐precipitated raw material. Nano‐structuring of the raw material enables production of a homogeneous precursor mixture for growing a crystal with minimal evaporation of Ga from the melt. The demonstrated nano‐engineering approach increased the light yield from the crystal by approximately 20%, enabling its applications in well logging.Baker Hughes a GE Company; Government of the Russian Federation grant N14.W03.31.0004; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART