Distributed environmental control

We present an architecture of distributed, independent control agents designed to work with the Computer Aided System Engineering and Analysis (CASE/A) simulation tool. CASE/A simulates behavior of Environmental Control and Life Support Systems (ECLSS). We describe a lattice of agents capable of distributed sensing and overcoming certain sensor and effector failures. We address how the architecture can achieve the coordinating functions of a hierarchical command structure while maintaining the robustness and flexibility of independent agents. These agents work between the time steps of the CASE/A simulation tool to arrive at command decisions based on the state variables maintained by CASE/A. Control is evaluated according to both effectiveness (e.g., how well temperature was maintained) and resource utilization (the amount of power and materials used)

Spectral Lags Obtained by CCF of Smoothed Lightcurves

We present a new technique to calculate the spectral lags of gamma-ray bursts (GRBs). Unlike previous processing methods, we first smooth the light curves of gamma-ray bursts in high and low energy bands using the "Loess" filter, then, we directly define the spectral lags as such to maximize the cross-correlation function (CCF) between two smoothed light curves. This method is suitable for various shapes of CCF; it effectively avoids the errors caused by manual selections for the fitting function and fitting interval. Using the method, we have carefully measured the spectral lags of individual pulses contained in BAT/Swift gamma-ray bursts with known redshifts, and confirmed the anti-correlation between the spectral lag and the isotropy luminosity. The distribution of spectral lags can be well fitted by four Gaussian components, with the centroids at 0.03 s, 0.09 s, 0.15 s, and 0.21 s, respectively. We find that some spectral lags of the multi-peak GRBs seem to evolve with time

Activities of \gamma-ray emitting isotopes in rainwater from Greater Sudbury, Canada following the Fukushima incident

We report the activity measured in rainwater samples collected in the Greater Sudbury area of eastern Canada on 3, 16, 20, and 26 April 2011. The samples were gamma-ray counted in a germanium detector and the isotopes 131I and 137Cs, produced by the fission of 235U, and 134Cs, produced by neutron capture on 133Cs, were observed at elevated levels compared to a reference sample of ice-water. These elevated activities are ascribed to the accident at the Fukushima Dai-ichi nuclear reactor complex in Japan that followed the 11 March earthquake and tsunami. The activity levels observed at no time presented health concerns.Comment: 4 pages, 8 figure

Thermal System Verification and Model Validation for NASA's Cryogenic Passively Cooled James Webb Space Telescope

A thorough and unique thermal verification and model validation plan has been developed for NASA s James Webb Space Telescope. The JWST observatory consists of a large deployed aperture optical telescope passively cooled to below 50 Kelvin along with a suite of several instruments passively and actively cooled to below 37 Kelvin and 7 Kelvin, respectively. Passive cooling to these extremely low temperatures is made feasible by the use of a large deployed high efficiency sunshield and an orbit location at the L2 Lagrange point. Another enabling feature is the scale or size of the observatory that allows for large radiator sizes that are compatible with the expected power dissipation of the instruments and large format Mercury Cadmium Telluride (HgCdTe) detector arrays. This passive cooling concept is simple, reliable, and mission enabling when compared to the alternatives of mechanical coolers and stored cryogens. However, these same large scale observatory features, which make passive cooling viable, also prevent the typical flight configuration fully-deployed thermal balance test that is the keystone to most space missions thermal verification plan. JWST is simply too large in its deployed configuration to be properly thermal balance tested in the facilities that currently exist. This reality, when combined with a mission thermal concept with little to no flight heritage, has necessitated the need for a unique and alternative approach to thermal system verification and model validation. This paper describes the thermal verification and model validation plan that has been developed for JWST. The plan relies on judicious use of cryogenic and thermal design margin, a completely independent thermal modeling cross check utilizing different analysis teams and software packages, and finally, a comprehensive set of thermal tests that occur at different levels of JWST assembly. After a brief description of the JWST mission and thermal architecture, a detailed description of the three aspects of the thermal verification and model validation plan is presented

Design and characterization of a research electrohydraulic lithotripter patterned after the Dornier HM3

An electrohydraulic lithotripter has been designed that mimics the behavior of the Dornier HM3 extracorporeal shock wave lithotripter. The key mechanical and electrical properties of a clinical HM3 were measured and a design implemented to replicate these parameters. Three research lithotripters have been constructed on this design and are being used in a multi-institutional, multidisciplinary research program to determine the physical mechanisms of stone fragmentation and tissue damage in shock wave lithotripsy. The acoustic fields of the three research lithotripters and of two clinical Dornier HM3 lithotripters were measured with a PVDF membrane hydrophone. The peak positive pressure, peak negative pressure, pulse duration, and shock rise time of the focal waveforms were compared. Peak positive pressures varied from 25 MPa at a voltage setting of 12 kV to 40 MPa at 24 kV. The magnitude of the peak negative pressure varied from -7 to -12 MPa over the same voltage range. The spatial variations of the peak positive pressure and peak negative pressure were also compared. The focal region, as defined by the full width half maximum of the peak positive pressure, was 60 mm long in the axial direction and 10 mm wide in the lateral direction. The performance of the research lithotripters was found to be consistent at clinical firing rates (up to 3 Hz). The results indicated that pressure fields in the research lithotripters are equivalent to those generated by a clinical HM3 lithotripter

Swimming against the tide: a study of a neighbourhood trying to rediscover its ‘reason for being’– the case of South Bank, Redcar and Cleveland.

Many of the programmes and initiatives to regenerate deprived neighbourhoods appear to have had limited lasting impact. It has been argued that one reason for this is that we still have little real understanding of the nature and scale of the problems some communities face (Bernt, 2009). This article attempts to add to our knowledge through close study of an area with multiple problems and a history of failed regeneration attempts. An in-depth case study, undertaken to explore the current situation and future prospects of South Bank, a small neighbourhood in the North East of England, highlights transferable knowledge which may be applied to other regeneration areas. The analysis considers the nature and consequences of industrial decline; entrenched deprivation; the stigmatization of communities; the value of community consultation and the potential impact of retail-led regeneration. We question whether negative stigma attached to places can be changed and we ask what the future may hold for deprived communities now that public sector funding has largely dried up, and we consider an alternative approach: the potential impacts of private sector retail-led regeneration in the absence of public sector funding

Krylov-Bogoliubov-Mitropolsky Averaging Used to Construct Effective Hamiltonians in the Theory of Strongly Correlated Electron Systems

We show that the Krylov-Bogoliubov-Mitropolsky averaging in the canonical formulation can be used as a method for constructing effective Hamiltonians in the theory of strongly correlated electron systems. As an example, we consider the transition from the Hamiltonians of the Hubbard and Anderson models to the respective Hamiltonians of the t-J and Kondo models. This is a very general method, has several advantages over other methods, and can be used to solve a wide range of problems in the physics of correlated systems.Comment: 9 page

Measurement of the Solar Neutrino Capture Rate by the Russian-American Gallium Solar Neutrino Experiment During One Half of the 22-Year Cycle of Solar Activity

We present the results of measurements of the solar neutrino capture rate in gallium metal by the Russian-American Gallium Experiment SAGE during slightly more than half of a 22-year cycle of solar activity. Combined analysis of the data of 92 runs during the 12-year period January 1990 through December 2001 gives a capture rate of solar neutrinos with energy more than 233 keV of 70.8 +5.3/-5.2 (stat.) +3.7/-3.2 (syst.) SNU. This represents only slightly more than half of the predicted standard solar model rate of 128 SNU. We give the results of new runs beginning in April 1998 and the results of combined analysis of all runs since 1990 during yearly, monthly, and bimonthly periods. Using a simple analysis of the SAGE results combined with those from all other solar neutrino experiments, we estimate the electron neutrino pp flux that reaches the Earth to be (4.6 +/- 1.1) E10/(cm^2-s). Assuming that neutrinos oscillate to active flavors the pp neutrino flux emitted in the solar fusion reaction is approximately (7.7 +/- 1.8) E10/(cm^2-s), in agreement with the standard solar model calculation of (5.95 +/- 0.06) E10/(cm^2-s).Comment: English translation of article submitted to Russian journal Zh. Eksp. Teor. Fiz. (JETP); 12 pages, 5 figures. V2: Added winter-summer difference and 2 reference

Investigation of DC-8 nacelle modifications to reduce fan-compressor noise in airport communities. Part 4 - Flight acoustical and performance evaluations, for period May 1967 - October 1969

Flight acoustical and performance evaluations of DC 8 nacelle modifications to reduce fan-compressor noise in airport communitie

Molecular dynamics simulations of lead clusters

Molecular dynamics simulations of nanometer-sized lead clusters have been performed using the Lim, Ong and Ercolessi glue potential (Surf. Sci. {\bf 269/270}, 1109 (1992)). The binding energies of clusters forming crystalline (fcc), decahedron and icosahedron structures are compared, showing that fcc cuboctahedra are the most energetically favoured of these polyhedral model structures. However, simulations of the freezing of liquid droplets produced a characteristic form of ``shaved'' icosahedron, in which atoms are absent at the edges and apexes of the polyhedron. This arrangement is energetically favoured for 600-4000 atom clusters. Larger clusters favour crystalline structures. Indeed, simulated freezing of a 6525-atom liquid droplet produced an imperfect fcc Wulff particle, containing a number of parallel stacking faults. The effects of temperature on the preferred structure of crystalline clusters below the melting point have been considered. The implications of these results for the interpretation of experimental data is discussed.Comment: 11 pages, 18 figues, new section added and one figure added, other minor changes for publicatio