Free air breathing planar PEM fuel cell design for portable electronics

Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005.Includes bibliographical references (leaf 33).PEM fuel cell technology is an energy source that can provide several times more energy per unit volume then current lithium ion batteries. However, PEM fuel cells remain to be optimized in volume and mass to create a minimum size for integration into portable electronics. A planar fuel cell design utilizes the bare minimum in volume and mass over current stacked fuel cell designs. This was done by taking an innovative approach of assembling the fuel cell with just the bare minimum components, a proton exchange membrane, cathode electrode, anode electrode, and gas diffusion layer on both sides of the membrane to assume the role of GDL and current collector. This planar fuel cell design was able to produce a power density over 25mW/cm2. This is an order of magnitude lower then reported air breathing fuel cell values, however the route cause has been isolated to the ohmic losses of the planar fuel cell. Increasing the applied contact forces and creating low resistance electronically conductive grid lines, have shown to contribute to the reduction in ohmic resistance and will be the focus of future research. From this research, a planar fuel cell design has been shown to successful work and there are ways to improve its performance.by Ethan J. Crumlin.S.B

Morgawr: an experimental Bronze Age-type sewn-plank craft based on the Ferriby boats

Photographs and a link to a video showing the construction and launch of "Morgawr" can also be found in ORE: http://hdl.handle.net/10871/14703This paper reports on the construction of a full-scale Bronze Age-type sewn-plank boat based on the Ferriby boats. The boat, which was named Morgawr, was constructed in the National Maritime Museum Cornwall in Falmouth, England, during 2012 and the first months of 2013, as part of a larger exhibition in the museum. This paper provides the background and context of the project, describes the process of building the craft, and reflects in particular on differences between Morgawr and the ‘hypothetical reconstruction of a complete sewn-plank boat’ published in 1990 by Ted Wright and John Coates which formed the basis for this project.Arts and Humanities Research Council (AHRC

Insights into Electrochemical Reactions from Ambient Pressure Photoelectron Spectroscopy

The understanding of fundamental processes in the bulk and at the interfaces of electrochemical devices is a prerequisite for the development of new technologies with higher efficiency and improved performance. One energy storage scheme of great interest is splitting water to form hydrogen and oxygen gas and converting back to electrical energy by their subsequent recombination with only water as a byproduct. However, kinetic limitations to the rate of oxygen-based electrochemical reactions hamper the efficiency in technologies such as solar fuels, fuel cells, and electrolyzers. For these reactions, the use of metal oxides as electrocatalysts is prevalent due to their stability, low cost, and ability to store oxygen within the lattice. However, due to the inherently convoluted nature of electrochemical and chemical processes in electrochemical systems, it is difficult to isolate and study individual electrochemical processes in a complex system. Therefore, in situ characterization tools are required for observing related physical and chemical processes directly at the places where and while they occur and can help elucidate the mechanisms of charge separation and charge transfer at electrochemical interfaces.National Science Foundation (U.S.). Materials Research Science and Engineering Centers (Program)Skoltech-MIT Center for Electrochemical Energy StorageUnited States. Department of EnergyNational Energy Technology Laboratory (U.S.)Solid State Energy Conversion Alliance. Core Technology Program (DEFE0009435

Light Induced Surface Reactions at the Bismuth Vanadate Potassium Phosphate Interface

Bismuth vanadate has recently drawn significant research attention as a light absorbing photoanode due to its performance for photoelectrochemical water splitting. In this study, we use in situ ambient pressure X ray photoelectron spectroscopy with Tender X rays 4.0 keV to investigate a polycrystalline bismuth vanadate BiVO4 electrode in contact with an aqueous potassium phosphate KPi solution at open circuit potential under both dark and light conditions. This is facilitated by the creation of a 25 to 30 nanometers thick electrolyte layer using the dip and pull method. We observe that under illumination bismuth phosphate forms on the BiVO4 surface leading to an increase of the surface negative charge. The bismuth phosphate layer may act to passivate surface states observed in photoelectrochemical measurements. The repulsive interaction between the negatively charged surface under illumination and the phosphate ions in solution causes a shift in the distribution of ions in the thin aqueous electrolyte film, which is observed as an increase in their photoelectron signals. Interestingly, we find that such changes at the BiVO4 KPi electrolyte interface are reversible upon returning to dark conditions. By measuring the oxygen 1s photoelectron peak intensities from the phosphate ions and liquid water as a function of time under dark and light conditions, we determine the timescales for the forward and reverse reactions. Our results provide direct evidence for light induced chemical modification of the BiVO4 KPi electrolyte interfac

Combined soft and hard X ray ambient pressure photoelectron spectroscopy studies of semiconductor electrolyte interfaces

The development of solar fuel generating materials would greatly benefit from a molecular level understanding of the semiconductor/electrolyte interface and changes in the interface induced by an applied potential and illumination by solar light. Ambient pressure photoelectron spectroscopy techniques with both soft and hard X-rays, AP-XPS and AP-HAXPES respectively, have the potential to markedly contribute to this understanding. In this paper we initially provide two examples of current challenges in solar fuels material development that AP-XPS and AP-HAXPES can directly address. This will be followed by a brief description of the distinguishing and complementary characteristics of soft and hard X-ray AP-XPS and AP-HAXPES and best approaches to achieving monolayer sensitivity in solid/aqueous electrolyte studies. In particular we focus on the detection of surface adsorbed hydroxyl groups in the presence of aqueous hydroxide anions in the electrolyte, a common situation when investigating photoanodes for solar fuel generating applications. The paper concludes by providing an example of a combined AP-XPS and AP-HAXPES study of a semiconductor/aqueous electrolyte interface currently used in water splitting devices specifically the BiVO4/aqueous potassium phosphate electrolyte interface

Growth and Characterization of Ce- Substituted Nd2Fe14B Single Crystals

Single crystals of (Nd1-xCex)2Fe14B are grown out of Fe-(Nd,Ce) flux. Chemical and structural analysis of the crystals indicates that (Nd1-xCex)2Fe14B forms a solid solution until at least x = 0.38 with a Vegard-like variation of the lattice constants with x. Refinements of single crystal neutron diffraction data indicate that Ce has a slight site preference (7:3) for the 4g rare earth site over the 4f site. Magnetization measurements show that for x = 0.38 the saturation magnetization at 400 K, a temperature important to applications, falls from 29.8 for the parent Nd2Fe14B to 27.6 (mu)B/f.u., the anisotropy field decreases from 5.5 T to 4.7 T, and the Curie temperature decreases from 586 to 543 K. First principles calculations carried out within density functional theory are used to explain the decrease in magnetic properties due to Ce substitution. Though the presence of the lower-cost and more abundant Ce slightly affects these important magnetic characteristics, this decrease is not large enough to affect a multitude of applications. Ce-substituted Nd2Fe14B is therefore a potential high-performance permanent magnet material with substantially reduced Nd content.Comment: 11 Pages, 8 figures, 5 table

An Electrochemical, Microtopographical and Ambient Pressure X-Ray Photoelectron Spectroscopic Investigation of Si/TiO_2/Ni/Electrolyte Interfaces

The electrical and spectroscopic properties of the TiO_2/Ni protection layer system, which enables stabilization of otherwise corroding photoanodes, have been investigated in contact with electrolyte solutions by scanning-probe microscopy, electrochemistry and in-situ ambient pressure X-ray photoelectron spectroscopy (AP-XPS). Specifically, the energy-band relations of the p+-Si/ALD-TiO_2/Ni interface have been determined for a selected range of Ni thicknesses. AP-XPS measurements using tender X-rays were performed in a three-electrode electrochemical arrangement under potentiostatic control to obtain information from the semiconductor near-surface region, the electrochemical double layer (ECDL) and the electrolyte beyond the ECDL. The degree of conductivity depended on the chemical state of the Ni on the TiO2surface. At low loadings of Ni, the Ni was present primarily as an oxide layer and the samples were not conductive, although the TiO_2 XPS core levels nonetheless displayed behavior indicative of a metal-electrolyte junction. In contrast, as the Ni thickness increased, the Ni phase was primarily metallic and the electrochemical behavior became highly conductive, with the AP-XPS data indicative of a metal-electrolyte junction. Electrochemical and microtopographical methods have been employed to better define the nature of the TiO_2/Ni electrodes and to contextualize the AP-XPS results

An Operando Investigation of (Ni-Fe-Co-Ce)O_x System as Highly Efficient Electrocatalyst for Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is a critical component of industrial processes such as electrowinning of metals and the chlor-alkali process. It also plays a central role in the developing renewable energy field of solar-fuels generation by providing both the protons and electrons needed to generate fuels such as H_2 or reduced hydrocarbons from CO_2. To improve these processes, it is necessary to expand the fundamental understanding of catalytically active species at low overpotential, which will further the development of novel electrocatalysts with high activity and durability. In this context, performing experimental investigations of the electrocatalysts under realistic working regimes, i.e. under operando conditions, is of crucial importance. Here, we study a highly active quinary transition metal oxide-based OER electrocatalyst by means of operando ambient pressure X-ray photoelectron spectroscopy and X-ray absorption spectroscopy performed at the solid/liquid interface. We observe that the catalyst undergoes a clear chemical-structural evolution as a function of the applied potential with Ni, Fe and Co oxy-hydroxides comprising the active catalytic species. While CeO_2 is redox inactive under catalytic conditions, its influence on the redox processes of the transition metals boosts the catalytic activity at low overpotentials, introducing an important design principle for the optimization of electrocatalysts and tailoring of novel materials