A parametric experimental investigation of a scramjet nozzle at Mach 6 with Freon and argon or air used for exhaust simulation

A parametric experimental investigation of a scramjet nozzle was conducted with a gas mixture used to simulate the scramjet engine exhaust flow at a free-stream Reynolds number of approximately 6.5 x 10(exp 6) per foot. External nozzle surface angles of 16, 20, and 24 deg were tested with a fixed-length ramp and for cowl internal surface angles of 6 and 12 deg. Pressure data on the external nozzle surface were obtained for mixtures of Freon and argon gases with a ratio of specific heats of about 1.23, which matches that of a scramjet exhaust. Forces and moments were determined by integration of the pressure data. Two nozzle configurations were also tested with air used to simulate the exhaust flow. On the external nozzle surface, lift and thrust forces for air exhaust simulation were approximately half of those for Freon-argon exhaust simulation and the pitching moment was approximately a third. These differences were primarily due to the difference in the ratios of specific heats between the two exhaust simulation gases. A 20 deg external surface angle produced the greatest thrust for a 6 deg cowl internal surface angle. A flow fence significantly increased lift and thrust forces over those for the nozzle without a flow fence

Investigation of effect of propulsion system installation and operation on aerodynamics of an airbreathing hypersonic airplane at Mach 0.3 to 1.2

Results from an investigation of the effects of the operation of a combined turbojet/scramjet propulsion system on the longitudinal aerodynamic characteristics of a 1/60-scale hypersonic airbreathing launch vehicle configuration are presented. Decomposition products of hydrogen peroxide were used for simulation of the propulsion system exhaust

Conodonts from the Quadrant Shales of Montana

Conodonts have not been known to exist in Montana prior to the discovery of the specimens discussed and described in this paper. With this fact in mind, the author has endeavored to correlate the species of seven genera found in the Quadrant formation of Montana with similar micro-organisms from other North American areas

SOUTH AMERICA: INDUSTRIAL ROUNDWOOD SUPPLY POTENTIAL

South America has substantial potential to expand its forest plantations and raw material supply. From 1997 to 2005, South America had a high annual growth rate in the production of industrial roundwood, with Brazil and Chile being the most important countries. In the same period, Asia had the only negative regional production growth rate in the world, and China became the largest round wood importer in the world. This paper summarizes the status of production, consumption, imports, and exports of industrial roundwood and forest products in South America. Produc-tion and exports from South America have continually increased at annual growth rates exceeding the forestry sector in general and the U.S. in particular. Based on timber growing investments to date, a strong timber production and forest products manufacturing sector has developed in the Southern Cone countries of Chile, Brazil, Argentina, and Uruguay, and is increasing in other countries in Latin America. There will be continued opportunities for forest plantations and new manufacturing facilities throughout South America, tempered somewhat by perceived country financial and political risks. These opportunities will allow South America to increase its share of world production and increase imports to North America and to Asia

Impact of new technology on timber harvesting costs: Evaluation methods and literature

Timber harvesting and transport are crucial components of the cost of delivered wood to forest products processing facilities. In fact, harvesting and delivering wood often costs more than the entire costs of growing wood until harvest. As such, timber harvesting research and development are important. Additionally, research in this area is worthwhile because efficiency gains, cost improvements, and environmental benefits due to timber harvesting research can be realized in a very short time period, rather than the decades-long wait required for research investments in timber growing. This paper provides an overview of the means of measuring the impact of new technology on timber harvesting costs. In recent years, there have been many efforts to increase research for developing better harvesting equipment and methods. In conjunction with these efforts, greater demands have been made for research efficiency and accountability (Silversides et al. 1988); several studies have therefore been completed to measure the impacts of timber harvesting research and development. These studies, other means of evaluating timber harvesting research, and suggestions for future evaluations are discussed

A lunar space station

A concept for a space station to be placed in low lunar orbit in support of the eventual establishment of a permanent moon base is proposed. This space station would have several functions: (1) a complete support facility for the maintenance of the permanent moon base and its population; (2) an orbital docking area to facilitate the ferrying of materials and personnel to and from Earth; (3) a zero gravity factory using lunar raw materials to grow superior GaAs crystals for use in semiconductors and mass produce inexpensive fiber glass; and (4) a space garden for the benefit of the air food cycles. The mission scenario, design requirements, and technology needs and developments are included as part of the proposal

The role of embryo movement in the development of the furcula

The pectoral girdle is a complex structure which varies in its morphology between species. A major component in birds is the furcula, which can be considered equivalent to a fusion of the paired clavicles found in many mammals, and the single interclavicle found in many reptiles. These elements are a remnant of the dermal skeleton and the only intramembranous bones in the trunk. Postnatally, the furcula plays important mechanical roles by stabilising the shoulder joint and acting as a mechanical spring during flight. In line with its mechanical role, previous studies indicate that, unlike many other intramembranous bones, furcula growth during development can be influenced by mechanical stimuli. This study investigated the response of individual aspects of furcula growth to both embryo immobilisation and hypermotility in the embryonic chicken. The impact of altered incubation temperature, which influences embryo motility, on crocodilian interclavicle development was also explored. We employed whole‐mount bone and cartilage staining and 3D imaging by microCT to quantify the impact of rigid paralysis, flaccid paralysis and hypermobility on furcula growth in the chicken, and 3D microCT imaging to quantify the impact of reduced temperature (32–28 °C) and motility on interclavicle growth in the crocodile. This revealed that the growth rates of the clavicular and interclavicular components of the furcula differ during normal development. Total furcula area was reduced by total unloading produced by flaccid paralysis, but not by rigid paralysis which maintains static loading of embryonic bones. This suggests that dynamic loading, which is required for postnatal bone adaptation, is not a requirement for prenatal furcula growth. Embryo hypermotility also had no impact on furcula area or arm length. Furcula 3D shape did, however, differ between groups; this was marked in the interclavicular component of the furcula, the hypocleideum. Hypocleideum length was reduced by both methods of immobilisation, and interclavicle area was reduced in crocodile embryos incubated at 28 °C, which are less motile than embryos incubated at 32 °C. These data suggest that the clavicular and interclavicle components of the avian furcula respond differently to alterations in embryo movement, with the interclavicle requiring both the static and dynamic components of movement‐related loading for normal growth, while static loading preserved most aspects of clavicle growth. Our data suggest that embryo movement, and the mechanical loading this produces, is important in shaping these structures during development to suit their postnatal mechanical roles

Law Enforcement Officers and the Domestic Violence Advocacy Referral Process

Domestic violence incidents impact the daily activities of the law enforcement agencies responsible for responding to these calls for service. Legislators and law enforcement leaders have expended countless hours, staffing, and finances to adequately protect the victims of domestic violence. In Virginia, an essential component of protecting victims of domestic violence involves the referral process, used by law enforcement officers to connect victims of domestic violence to domestic violence advocacy groups. The Code of Virginia and law enforcement agencies receiving accreditation through the Virginia Law Enforcement Professional Standards Commission (VLEPSC) require these referrals. There is available research regarding the referral process at metropolitan law enforcement agencies across the United States. However, there is a gap regarding how Virginia law enforcement officers employed with VLEPSC-accredited agencies serving populations less than 50,000 describe their experiences and the navigation of the referral process. This qualitative study utilized semi-structured interviews to assess the perspectives of 15 law enforcement officers who served in a full-time capacity and were responsible for investigating domestic violence incidents reported to the Goochland County Sheriff’s Office, Greene County Sheriff’s Office, King George County Sheriff’s Office, Winchester Police Department, and the Woodstock Police Department. This study found the following: (a) rural law enforcement officers struggle with the strict level of confidentiality advocacy services, (b) it is imperative for law enforcement officers to take an active role in their education regarding the domestic violence process, and (c) rural law enforcement officers need extended training regarding domestic violence