Planck LFI flight model feed horns

this paper is part of the Prelaunch status LFI papers published on JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/jinst The Low Frequency Instrument is optically interfaced with the ESA Planck telescope through 11 corrugated feed horns each connected to the Radiometer Chain Assembly (RCA). This paper describes the design, the manufacturing and the testing of the flight model feed horns. They have been designed to optimize the LFI optical interfaces taking into account the tight mechanical requirements imposed by the Planck focal plane layout. All the eleven units have been successfully tested and integrated with the Ortho Mode transducers.Comment: This is an author-created, un-copyedited version of an article accepted for publication in JINST. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The definitive publisher authenticated version is available online at 10.1088/1748-0221/4/12/T1200

I soggetti valutatori

Il contributo ha ad oggetto l'analisi di commento delle disposizioni del d.lg. 25 maggio 2017, n. 74, che disciplinano la figure dei soggetti che si occupano di svolgere la funzione di valutazione dele performance dei dipendenti nell'ambito delle pubbliche amministrazioni. Dall'Anac, al Dipartimento della funzione pubblica, all' organismo indipendente di valutazione (Oiv), all’organo di indirizzo politico-amministrativo, ai dirigenti, lo studio riflette l'inquadramento sistematico nell'ambito dell'ordinamento giuridico ponendo in evidenza, nel corso della trattazione, l'ambiguo rapporto tra politica e amministrazione

The Planck-LFI flight model composite waveguides

The Low Frequency Instrument on board the PLANCK satellite is designed to give the most accurate map ever of the CMB anisotropy of the whole sky over a broad frequency band spanning 27 to 77 GHz. It is made of an array of 22 pseudo-correlation radiometers, composed of 11 actively cooled (20 K) Front End Modules (FEMs), and 11 Back End Modules (BEMs) at 300K. The connection between the two parts is made with rectangular Wave Guides. Considerations of different nature (thermal, electromagnetic and mechanical), imposed stringent requirements on the WGs characteristics and drove their design. From the thermal point of view, the WG should guarantee good insulation between the FEM and the BEM sections to avoid overloading the cryocooler. On the other hand it is essential that the signals do not undergo excessive attenuation through the WG. Finally, given the different positions of the FEM modules behind the focal surface and the mechanical constraints given by the surrounding structures, different mechanical designs were necessary. A composite configuration of Stainless Steel and Copper was selected to satisfy all the requirements. Given the complex shape and the considerable length (about 1.5-2 m), manufacturing and testing the WGs was a challenge. This work deals with the development of the LFI WGs, including the choice of the final configuration and of the fabrication process. It also describes the testing procedure adopted to fully characterize these components from the electromagnetic point of view and the space qualification process they underwent. Results obtained during the test campaign are reported and compared with the stringent requirements. The performance of the LFI WGs is in line with requirements, and the WGs were successfully space qualified.Comment: this paper is part of the Prelaunch status LFI papers published on JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/jins

Repetitive low-frequency stimulation reduces epileptiform synchronization in limbic neuronal networks.

Deep-brain electrical or transcranial magnetic stimulation may represent a therapeutic tool for controlling seizures in patients presenting with epileptic disorders resistant to antiepileptic drugs. In keeping with this clinical evidence, we have reported that repetitive electrical stimuli delivered at approximately 1 Hz in mouse hippocampus-entorhinal cortex (EC) slices depress the EC ability to generate ictal activity induced by the application of 4-aminopyridine (4AP) or Mg2+-free medium (Barbarosie, M., Avoli, M., 1997. CA3-driven hippocampal–entorhinal loop controls rather than sustains in vitro limbic seizures. J. Neurosci. 17, 9308–9314.). Here, we confirmed a similar control mechanism in rat brain slices analyzed with field potential recordings during 4AP (50 μM) treatment. In addition, we used intrinsic optical signal (IOS) recordings to quantify the intensity and spatial characteristics of this inhibitory influence. IOSs reflect the changes in light transmittance throughout the entire extent of the slice, and are thus reliable markers of limbic network epileptiform synchronization. First, we found that in the presence of 4AP, the IOS increases, induced by a train of electrical stimuli (10 Hz for 1 s) or by recurrent, single-shock stimulation delivered at 0.05 Hz in the deep EC layers, are reduced in intensity and area size by low-frequency (1 Hz), repetitive stimulation of the subiculum; these effects were observed in all limbic areas contained in the slice. Second, by testing the effects induced by repetitive subicular stimulation at 0.2–10 Hz, we identified maximal efficacy when repetitive stimuli are delivered at 1 Hz. Finally, we discovered that similar, but slightly less pronounced, inhibitory effects occur when repetitive stimuli at 1 Hz are delivered in the EC, suggesting that the reduction of IOSs seen during repetitive stimulation is pathway dependent as well as activity dependent. Thus, the activation of limbic networks at low frequency reduces the intensity and spatial extent of the IOS changes that accompany ictal synchronization in an in vitro slice preparation. This conclusion supports the view that repetitive stimulation may represent a potential therapeutic tool for controlling seizures in patients with pharmacoresistant epileptic disorders

The first solvent-free cyclotrimerization reaction of arylethynes catalyzed by rhodium porphyrins

Different rhodium(III) porphyrin chlorides have been used as catalysts for the cyclotrimerization of several arylethynes, giving in many cases high yields in substituted benzenes and selectivities based on the steric hindrance of the macrocycles and on the substitution of the substrates

Planck-LFI radiometers' spectral response

The Low Frequency Instrument (LFI) is an array of pseudo-correlation radiometers on board the Planck satellite, the ESA mission dedicated to precision measurements of the Cosmic Microwave Background. The LFI covers three bands centred at 30, 44 and 70 GHz, with a goal bandwidth of 20% of the central frequency. The characterization of the broadband frequency response of each radiometer is necessary to understand and correct for systematic effects, particularly those related to foreground residuals and polarization measurements. In this paper we present the measured band shape of all the LFI channels and discuss the methods adopted for their estimation. The spectral characterization of each radiometer was obtained by combining the measured spectral response of individual units through a dedicated RF model of the LFI receiver scheme. As a consistency check, we also attempted end-to-end spectral measurements of the integrated radiometer chain in a cryogenic chamber. However, due to systematic effects in the measurement setup, only qualitative results were obtained from these tests. The measured LFI bandpasses exhibit a moderate level of ripple, compatible with the instrument scientific requirements.Comment: 16 pages, 9 figures, this paper is part of the Prelaunch status LFI papers published on JINST: http://www.iop.org/EJ/journal/-page=extra.proc5/jins

Vesicle coat proteins: Finding the missing link

The discovery of an ancient protein complex reveals the evolutionary relationships between the proteins that help to form vesicles

High Performances Corrugated Feed Horns for Space Applications at Millimetre Wavelengths

We report on the design, fabrication and testing of a set of high performance corrugated feed horns at 30 GHz, 70 GHz and 100 GHz, built as advanced prototypes for the Low Frequency Instrument (LFI) of the ESA Planck mission. The electromagnetic designs include linear (100 GHz) and dual shaped (30 and 70 GHz) profiles. Fabrication has been achieved by direct machining at 30 GHz, and by electro-formation at higher frequencies. The measured performances on side lobes and return loss meet the stringent Planck requirements over the large (20%) instrument bandwidth. Moreover, the advantage in terms of main lobe shape and side lobes levels of the dual profiled designs has been demonstrated.Comment: 16 pages, 7 figures, accepted for publication in Experimental Astronom

Empathic and cognitive processing in people with schizophrenia: a study on an Italian sample

The aim of this study was to explore the relationships among empathy processes in terms of self-report empathy evaluation and recognition of emotional cues and Theory of Mind components. We used the Empathy Quotient – short form (EQ-s), the Pictures of Facial Affect (POFA) system, a (ToM) Irony appreciation task and the Wisconsin Card Sorting Test (WCST), respectively. The Positive and Negative Symptoms Scale (PANSS) and Global Assessment of Functioning (GAF) were also used to investigate the relationship with symptomatology and functioning. The sample consisted of 30 participants with diagnosis of schizophrenia. Our results found no significant correlations between EQ-s and other cognitive or clinical variables. PoFA total score and recognition of fear correlated with time spent to give a correct response to the ToM irony comprehension. Time spent to correctly respond to both ToM and physical vignettes correlated with negative symptoms. Positive, negative and cognitive clusters of the PANSS correlated with the GAF. The relationships we found among the considered constructs suggest that empathic processing acts on functionality improving the personal efficiency, in terms of readiness and rapidity, to cope with one’s environment, in the multifaceted social setting. Given that emotion perception in particular has been connected to social competence, independent living and community functioning, it is conceivable that emotion processing may be a potential catalyst within the mindreading process, which can have an impact both on symptomatology and social functioning