Saturated Critical Heat Flux in a Multi-Microchannel Heat Sink Fed by a Split Flow System

An extensive experimental campaign has been carried out for the measurement of saturated critical heat flux in a multi-microchannel copper heat sink. The heat sink was formed by 29 parallel channels that were 199 μm wide and 756 μm deep. In order to increase the critical heat flux and reduce the two-phase pressure drop, a split flow system was implemented with one central inlet at the middle of the channels and two outlets at either end. The base critical heat flux was measured using three HFC Refrigerants (R134a, R236fa and R245fa) for mass fluxes ranging from 250 to 1500 kg/m2 s, inlet subcoolings from −25 to −5 K and saturation temperatures from 20 to 50 °C. The parametric effects of mass velocity, saturation temperature and inlet subcooling were investigated. The analysis showed that significantly higher CHF was obtainable with the split flow system (one inlet–two outlets) compared to the single inlet–single outlet system, providing also a much lower pressure drop. Notably several existing predictive methods matched the experimental data quite well and quantitatively predicted the benefit of higher CHF of the split flow

Impact of Power Allocation and Antenna Directivity in the Capacity of a Multiuser Cognitive Ad Hoc Network

This paper studies the benefits that power control and antenna directivity can bring to the capacity of a multiuser cognitive radio network. The main objective is to optimize the secondary network sum rate under the capacity constraint of the primary network. Exploiting location awareness, antenna directivity, and the power control capability, the cognitive radio ad hoc network can broaden its coverage and improve capacity. Computer simulations show that by employing the proposed method the system performance is significantly enhanced compared to conventional fixed power allocation

A GIT interpretration of the Harder-Narasimhan filtration

An unstable torsion free sheaf on a smooth projective variety gives a GIT unstable point in certain Quot scheme. To a GIT unstable point, Kempf associates a "maximally destabilizing" 1-parameter subgroup, and this induces a filtration of the torsion free sheaf. We show that this filtration coincides with the Harder-Narasimhan filtration.Comment: 19 pages; Comments of the referees and references added. The construction for holomorphic pairs (Sections 6 and 7 from previous version) will appear in a further publication. To appear in Rev. Mat Complutens

Finite VEVs from a Large Distance Vacuum Wave Functional

We show how to compute vacuum expectation values from derivative expansions of the vacuum wave functional. Such expansions appear to be valid only for slowly varying fields, but by exploiting analyticity in a complex scale parameter we can reconstruct the contribution from rapidly varying fields.Comment: 39 pages, 16 figures, LaTeX2e using package graphic

Visco-hyperelastic model with damage for simulating cyclic thermoplastic elastomers behavior applied to an industrial component

In this work a nonlinear phenomenological visco-hyperelastic model including damage consideration is developed to simulate the behavior of Santoprene 101-73 material. This type of elastomeric material is widely used in the automotive and aeronautic sectors, as it has multiple advantages. However, there are still challenges in properly analyzing the mechanical phenomena that these materials exhibit. To simulate this kind of material a lot of theories have been exposed, but none of them have been endorsed unanimously. In this paper, a new model is presented based on the literature, and on experimental data. The test samples were extracted from an air intake duct component of an automotive engine. Inelastic phenomena such as hyperelasticity, viscoelasticity and damage are considered singularly in this model, thus modifying and improving some relevant models found in the literature. Optimization algorithms were used to find out the model parameter values that lead to the best fit of the experimental curves from the tests. An adequate fitting was obtained for the experimental results of a cyclic uniaxial loading of Santoprene 101-73

Resonating bipolarons

Electrons coupled to local lattice deformations end up in selftrapped localized molecular states involving their binding into bipolarons when the coupling is stronger than a certain critical value. Below that value they exist as essentially itinerant electrons. We propose that the abrupt crossover between the two regimes can be described by resonant pairing similar to the Feshbach resonance in binary atomic collision processes. Given the intrinsically local nature of the exchange of pairs of itinerant electrons and localized bipolarons, we demonstrate the occurrence of such a resonance on a finite-size cluster made out of metallic atoms surrounding a polaronic ligand center.Comment: 7 pages, 4 figures, to be published in Europhysics Letter

Assessing strength and power in resistance training

Maximal Dynamic Strength is usually assessed either by the one repetition maximum test (1-RM) or by a repetition maximum test with submaximal loads, which requires the application of a formula to estimate the value of 1-RM. This value is needed to establish the objective of resistance training: such as maximum strength, endurance strength, and/or explosive strength. However, both 1-RM and submaximal tests are unable to highlight the changes produced on power and velocity. This manuscript summarizes and reviews several common strength testing protocols and proposes a novel approach that may offer greater insight to hierarchical muscle functionalit