Sustainable risk management of emerging contaminants in municipal wastewaters

This article is available open access through the publisher’s website at the link below. Copyright @ 2009 The Royal Society.The presence of emerging contaminants in municipal wastewaters, particularly endocrine-disrupting compounds such as oestrogenic substances, has been the focus of much public concern and scientific attention in recent years. Due to the scientific uncertainty still surrounding their effects, the Precautionary Principle could be invoked for the interim management of potential risks. Therefore, precautionary prevention risk-management measures could be employed to reduce human exposure to the compounds of concern. Steroid oestrogens are generally recognized as the most significant oestrogenically active substances in domestic sewage effluent. As a result, the UK Environment Agency has championed a ‘Demonstration Programme’ to investigate the potential for removal of steroid oestrogens and alkylphenol ethoxylates during sewage treatment. Ecological and human health risks are interdependent, and ecological injuries may result in increased human exposures to contaminants or other stressors. In this context of limiting exposure to potential contaminants, examining the relative contribution of various compounds and pathways should be taken into account when identifying effective risk-management measures. In addition, the explicit use of ecological objectives within the scope of the implementation of the EU Water Framework Directive poses new challenges and necessitates the development of ecosystem-based decision tools. This paper addresses some of these issues and proposes a species sensitivity distribution approach to support the decision-making process related to the need and implications of sewage treatment work upgrade as risk-management measures to the presence of oestrogenic compounds in sewage effluent

Nitrogen pair-induced temperature insensitivity of the band gap of GaNSb alloys

The temperature dependence of the band gap of GaN x Sb1−x films with x ≤ 1.3% has been studied in the 1.1–3.3 m (0.35–1.1 eV) range using infrared absorption spectroscopy between 4.2 and 300 K. As with other dilute nitride semiconductors, the temperature dependence of the band gap is reduced by alloying with nitrogen when compared to the host binary compound. However, for GaNSb, the smallest variation of the band gap with temperature is observed for samples with the lowest N content for which the band gap is almost totally insensitive to temperature changes. This contrasts with the more widely studied GaN x As1−x alloys in which the band gap variation with temperature decreases with increasing N content. The temperature-dependent absorption spectra are simulated within the so-called band anticrossing model of the interaction between the extended conduction band states of the GaSb and the localized states associated with the N atoms. The N next-nearest neighbor pair states are found to be responsible for the temperature insensitivity of the band gap of the GaNSb alloys as a result of their proximity to the conduction band edge giving them a more pronounced role than in GaNAs alloys

Contactless electroreflectance and theoretical studies of band gap and spin-orbit splitting in InP1-xBix dilute bismide with x <= 0.034

Contactless electroreflectance is applied to study the band gap (E-0) and spin-orbit splitting (Delta(SO)) in InP1-xBix alloys with 0 < x <= 0.034. The E-0 transition shifts to longer wavelengths very significantly (-83 meV/% Bi), while the E0 + Delta(SO) transition shifts very weakly (-13 meV/% Bi) with the rise of Bi concentration. These changes in energies of optical transitions are discussed in the context of the valence band anticrossing model and ab initio calculations. Shifts of E-0 and E-0 + Delta(SO) transitions, obtained within ab-initio calculations, are -106 and -20 meV per % Bi, respectively, which is in a good agreement with experimental results

Growth and properties of GaSbBi alloys

Molecular-beam epitaxy has been used to grow GaSb 1− x Bi x alloys with x up to 0.05. The Bi content, lattice expansion, and film thickness were determined by Rutherford backscattering and x-ray diffraction, which also indicate high crystallinity and that >98% of the Bi atoms are substitutional. The observed Bi-induced lattice dilation is consistent with density functional theory calculations. Optical absorption measurements and valence band anticrossing modeling indicate that the room temperature band gap varies from 720 meV for GaSb to 540 meV for GaSb 0.95Bi0.05, corresponding to a reduction of 36 meV/%Bi or 210 meV per 0.01 Å change in lattice constant

Dietary intake of benzo(a)pyrene and risk of esophageal cancer in north of Iran

One etiologic factor for high incidence of esophageal squamous cell carcinoma (ESCC) in Golestan (Northeastern Iran) might be exposure to polycyclic aromatic hydrocarbons. We examined whether food and water are major sources of benzo(a)pyrene (BaP) exposure in this population. We used a dietary questionnaire to assess the daily intake of staple food (rice and bread) and water in 3 groups: 40 ESCC Golestan cases, 40 healthy subjects from the same area, and 40 healthy subjects from a low-risk area in Southern Iran. We measured, by high-performance liquid chromatography combined with fluorescence detection, the BaP concentration of bread, rice, and water in samples obtained from these 3 groups and calculated the daily intake of BaP. Mean BaP concentration of staple foods and water was similar and within standard levels in both areas, but the daily intake of BaP was higher in controls from the high-risk area than in controls from the low-risk area (91.4 vs. 70.6 ng/day, P < 0.01). In the multivariate regression analysis, having ESCC had no independent effect on BaP, whereas residence in the low-risk area was associated with a significant decrease in total BaP intake. Polycyclic aromatic hydrocarbons might, along with other risk factors, contribute to the high risk of ESCC in Golestan. Copyright © 2008, Taylor & Francis Group, LLC

Influence of two acyclic homoterpenes (Tetranorterpenes) on the foraging behavior of anthonomus grandis Boh

Previous studies have shown that the boll weevil, Anthonomus grandis, is attracted to constitutive and conspecific herbivore-induced cotton volatiles, preferring the blend emitted by cotton at the reproductive over the vegetative stage. Moreover, this preference was paralleled by the release of the acyclic homoterpenes (tetranorterpenes) (E)-4,8-dimethyl-1,3,7-nonatriene (DMNT) and (E,E)-4,8,12-trimethyltrideca-1,3,7,11-tetraene (TMTT) in Delta Opal cotton being higher at the vegetative than at the reproductive stage. Here, we evaluated whether this difference in release of acyclic homoterpenes also occurred in other cotton varieties, and if boll weevils could recognize these compounds as indicators of a specific cotton phenological stage. Results showed that cotton genotypes CNPA TB-90, BRS-293 and Delta Opal all produced higher levels of DMNT and TMTT at the vegetative stage than at the reproductive stage and that these homoterpenes allowed for principal component analysis separation of volatiles produced by the two phenological stages. Electroantennograms confirmed boll weevil antennal responses to DMNT and TMTT. Behavioral assays, using Y-tube olfactometers, showed that adding synthetic homoterpenes to reproductive cotton volatiles (mimicking cotton at the vegetative stage in terms of homoterpene levels) resulted in reduced attraction to boll weevils compared to that to unmodified reproductive cotton. Weevils showed no preference when given a choice between plants at the vegetative stage and the vegetative stage-mimicked plant. Altogether, the results show that DMNT and TMTT are used by boll weevils to distinguish between cotton phenological stages

High Bi content GaSbBi alloys

The epitaxial growth, structural, and optical properties of GaSb 1– x Bi x alloys have been investigated. The Bi incorporation into GaSb is varied in the range 0 < x ≤ 9.6% by varying the growth rate (0.31–1.33 μm h−1) at two growth temperatures (250 and 275 °C). The Bi content is inversely proportional to the growth rate, but with higher Bi contents achieved at 250 than at 275 °C. A maximum Bi content of x = 9.6% is achieved with the Bi greater than 99% substitutional. Extrapolating the linear variation of lattice parameter with Bi content in the GaSbBi films enabled a zinc blende GaBi lattice parameter to be estimated of 6.272 Å. The band gap at 300 K of the GaSbBi epitaxial layers decreases linearly with increasing Bi content down to 410 ± 40 meV (3 μm) for x = 9.6%, corresponding to a reduction of ∼35 meV/%Bi. Photoluminescence indicates a band gap of 490 ± 5 meV at 15 K for x = 9.6%

An evaluation of metal removal during wastewater treatment: The potential to achieve more stringent final effluent standards

This is the author's accepted manuscript. The final published article is available from the link below. Copyright @ 2011 Taylor & Francis.Metals are of particular importance in relation to water quality, and concern regarding the impact of these contaminants on biodiversity is being encapsulated within the latest water-related legislation such as the Water Framework Directive in Europe and criteria revisions to the Clean Water Act in the United States. This review undertakes an evaluation of the potential of 2-stage wastewater treatment consisting of primary sedimentation and biological treatment in the form of activated sludge processes, to meet more stringent discharge consents that are likely to be introduced as a consequence. The legislation, sources of metals, and mechanisms responsible for their removal are discussed, to elucidate possible pathways by which the performance of conventional processes may be optimized or enhanced. Improvements in effluent quality, achievable by reducing concentrations of suspended solids or biochemical oxygen demand, may also reduce metal concentrations although meeting possible requirements for the removal of copper my be challenging