Kinetics of mobile impurities and correlation functions in one-dimensional superfluids at finite temperature

We scrutinize the hydrodynamic approach for calculating dynamical correlations in one-dimensional superfluids near integrability and calculate the characteristic time scale {\tau} beyond which this approach is valid. For time scales shorter than {\tau} hydrodynamics fails and we develop an approach based on kinetics of fermionic quasiparticles described as mobile impurities. New universal results for the dynamical structure factor relevant to experiments in ultracold atomic gases are obtained.Comment: 5 pages, 2 figures. Supplemental material included. Version 3: Minor typos correcte

Layer-by-layer epitaxial thin films of the pyrochlore Tb2Ti2O7

Layer-by-layer epitaxial growth of the pyrochlore magnet Tb2Ti2O7 on the isostructural substrate Y2Ti2O7 results in high-quality single crystal films of up to 60 nm thickness. Substrate-induced strain is shown to act as a strong and controlled perturbation to the exotic magnetism of Tb2Ti2O7, opening up the general prospect of strain-engineering the diverse magnetic and electrical properties of pyrochlore oxides

Crystal Shape-Dependent Magnetic Susceptibility and Curie Law Crossover in the Spin Ices Dy2Ti2O7 and Ho2Ti2O7

We present an experimental determination of the isothermal magnetic susceptibility of the spin ice materials Dy2Ti2O7 and Ho2Ti2O7 in the temperature range 1.8-300 K. The use of spherical crystals has allowed the accurate correction for demagnetizing fields and allowed the true bulk isothermal susceptibility X_T(T) to be estimated. This has been compared to a theoretical expression based on a Husimi tree approximation to the spin ice model. Agreement between experiment and theory is excellent at T > 10 K, but systematic deviations occur below that temperature. Our results largely resolve an apparent disagreement between neutron scattering and bulk measurements that has been previously noted. They also show that the use of non-spherical crystals in magnetization studies of spin ice may introduce very significant systematic errors, although we note some interesting - and possibly new - systematics concerning the demagnetizing factor in cuboidal samples. Finally, our results show how experimental susceptibility measurements on spin ices may be used to extract the characteristic energy scale of the system and the corresponding chemical potential for emergent magnetic monopoles.Comment: 11 pages, 3 figures 1 table. Manuscript submitte

First principles calculation and experimental investigation of lattice dynamics in the rare earth pyrochlores R2Ti2O7 (R=Tb, Dy, Ho)

We present a model of the lattice dynamics of the rare earth titanate pyrochlores R2Ti2O7 (R=Tb, Dy, Ho), which are important materials in the study of frustrated magnetism. The phonon modes are obtained by density functional calculations, and these predictions are verified by comparison with scattering experiments. Single crystal inelastic neutron scattering is used to measure acoustic phonons along high symmetry directions for R=Tb, Ho; single crystal inelastic x-ray scattering is used to measure numerous optical modes throughout the Brillouin zone for R=Ho; and powder inelastic neutron scattering is used to estimate the phonon density of states for R=Tb, Dy, Ho. Good agreement between the calculations and all measurements is obtained, meaning that the energies and symmetries of the phonons in these materials can be regarded as understood. The knowledge of the phonon spectrum is important for understanding spin-lattice interactions, and can be expected to be transferred readily to other members of the series to guide the search for unconventional magnetic excitations

Explorative Study on Asymmetric Sketch Interactions for Object Retrieval in Virtual Reality

Drawing tools for Virtual Reality (VR) enable users to model 3D designs from within the virtual environment itself. These tools employ sketching and sculpting techniques known from desktop-based interfaces and apply them to hand-based controller interaction. While these techniques allow for mid-air sketching of basic shapes, it remains difficult for users to create detailed and comprehensive 3D models. Our work focuses on supporting the user in designing the virtual environment around them by enhancing sketch-based interfaces with a supporting system for interactive model retrieval. An immersed user can query a database containing detailed 3D models and replace them with the virtual environment through sketching. To understand supportive sketching within a virtual environment, we made an explorative comparison between asymmetric methods of sketch interaction, i.e., 3D mid-air sketching, 2D sketching on a virtual tablet, 2D sketching on a fixed virtual whiteboard, and 2D sketching on a real tablet. Our work shows that different patterns emerge when users interact with 3D sketches rather than 2D sketches to compensate for different results from the retrieval system. In particular, the user adopts strategies when drawing on canvas of different sizes or using a physical device instead of a virtual canvas. While we pose our work as a retrieval problem for 3D models of chairs, our results can be extrapolated to other sketching tasks for virtual environments

Epidemiology and In Vitro Activity of Ceftazidime/Avibactam, Meropenem/Vaborbactam and Imipenem/Relebactam against KPC-Producing K. pneumoniae Collected from Bacteremic Patients, 2018 to 2020

The management of KPC-producing K. pneumoniae (KPC-Kp) in bloodstream infections (BSIs) represent a serious clinical challenge. In this study, the aim is to assess the incidence of resistance to novel β-lactams-β-lactamase inhibitor combinations (βL-βLICs), such as ceftazidime-avibactam (CAZ-AVI), meropenem-vaborbactam (MER-VAB) and imipenem-relebactam (IMI-REL), in KPC-Kp strains collected during a three-year period from patients with bacteremia. KPC-Kp strains resistant to βL-βLICs were selected for whole-genome sequencing. A total of 133 K. pneumoniae strains were isolated, and KPC-Kp strains were the most represented (87.2%). In 2018, resistance to CAZ-AVI and MER-VAB was 6.5% and 14.5%, respectively. In 2019, KPC-Kp resistance to CAZ-AVI and MER-VAB remained at low levels, with values of 12.9% and 3.2%, respectively. During 2020, CAZ-AVI resistance was detected in 2/23 of KPC-Kp strains (8.7%). IMI-REL was the most active βL-βLIC, inhibiting >98% of the isolates, while CAZ-AVI and MER-VAB inhibited 87-93% and 85-97% of the KPC producers, respectively. Correlations between genotypic traits and resistance to βL-βLICs showed that KPC-Kp strains resistant to CAZ-AVI harbored a mutation within the blaKPC-3 gene, while all KPC-Kp strains resistant to CAZ-AVI, MER-VAB and/or IMI-REL carried the blaKPC-3 gene. Moreover, genetic analysis of porin genes showed that 14/16 of KPC-Kp resistant isolates possessed a truncated OmpK35 and glycine (G) and aspartic acid (D) insertions at positions 134-135 within OmpK36, whereas 2/16 displayed truncated OmpK35 and OmpK36 porins. Novel βL-βLICs are promising agents against KPC-Kp infections; however, the emergence of resistance to these agents highlights the need for continuous surveillance and application of enhanced antimicrobial stewardship

A comparison of energy and thermal performance of rooftop greenhouses and green roofs in Mediterranean climate: A hygrothermal assessment in WuFi

In urban areas, a considerable proportion of energy demand is allocated to buildings. Since rooftops constitute one-fourth of all urban surfaces, an increasing amount of attention is paid to achieving the most efficient shapes and component designs compatible with every climate and urban context, for rooftops of varying sizes. In this study, three types of rooftop technologies, namely insulated, green roof, and rooftop greenhouse, are evaluated for energy and thermal performance using computer simulations. Water surface exposure, absorption, and intrusion are the three important factors in the calculation of hygrothermal models that impact energy consumption and building envelope performance; however, a few studies are specifically focused on providing realistic results in multi-dimensional hygrothermal models and the assessment of the impact of moisture in roofing solutions. This paper aims at evaluating the performance of three different roofing technologies through a two-dimensional hygrothermal simulation in software WUFI. To accomplish this, a precise localized microclimate model of a complex urban context on the scale of a neighborhood was employed to evaluate the cooling and heating loads of the buildings, the impact of the water content in the green roof on the thermal behavior of the roof surface, and the feasibility of designing a building with nearly zero cooling needs. A two-story building in the city center of Bologna, Italy is modelled. Simulation results have shown that during the cooling period, the performance of the designed rooftop greenhouse is the most effective by 50% reduction in cooling loads. Besides, the impact of moisture in green roofs has been detected as a negative factor for thermal and energy performance of the building in the Mediterranean climate. The results ultimately highlighted the capability of passively-designed rooftop greenhouses to create a building with nearly zero cooling needs

Turning agricultural wastes into biomaterials: Assessing the sustainability of scenarios of circular valorization of corn cob in a life-cycle perspective

Circular economy plays a key role in increasing the sustainability of the agricultural sector, given the countless possibilities of transforming crop residues and recycling precious resources. The maize cultivation process produces a significant amount of residual organic materials, commonly left on the field, as a soil conditioner and source of nutrients even if some parts, such as the cob, play a minor role in these actions. The solutions for the valorization of this remnant depend on economic and environmental factors and the evaluation of the environmental performances of the processes in a life-cycle perspective is important to compare the overall sustainability of the valorization alternatives, maximizing their environmental added value. This work reports the results of Life Cycle Analysis, from cradle-to-gate of corn cob valorized as a raw material in two scenarios: corn cob pellet and corn cob abrasive grits to use as blasting or finishing media. A comparative study has been performed with two products available on the market and with the same functions. The results show that cob-based products have lower impact than those currently used. The work provides indication for evaluating the benefits of turning agricultural wastes in natural-based materials and intends to promote circular economy processes in agriculture production

Review of the Heat Stress-Induced Responses in Dairy Cattle

In the dairy cattle sector, the evaluation of the effects induced by heat stress is still one of the most impactful and investigated aspects as it is strongly connected to both sustainability of the production and animal welfare. On the other hand, more recently, the possibility of collecting a large dataset made available by the increasing technology diffusion is paving the way for the application of advanced numerical techniques based on machine learning or big data approaches. In this scenario, driven by rapid change, there could be the risk of dispersing the relevant information represented by the physiological animal component, which should maintain the central role in the development of numerical models and tools. In light of this, the present literature review aims to consolidate and synthesize existing research on the physiological consequences of heat stress in dairy cattle. The present review provides, in a single document, an overview, as complete as possible, of the heat stress-induced responses in dairy cattle with the intent of filling the existing research gap for extracting the veterinary knowledge present in the literature and make it available for future applications also in different research fields