Analytical computation of the off-axis Effective Area of grazing incidence X-ray mirrors

Focusing mirrors for X-ray telescopes in grazing incidence, introduced in the 70s, are characterized in terms of their performance by their imaging quality and effective area, which in turn determines their sensitivity. Even though the on-axis effective area is assumed in general to characterize the collecting power of an X-ray optic, the telescope capability of imaging extended X-ray sources is also determined by the variation in its effective area with the off-axis angle. [...] The complex task of designing optics for future X-ray telescopes entails detailed computations of both imaging quality and effective area on- and off-axis. Because of their apparent complexity, both aspects have been, so far, treated by using ray-tracing routines aimed at simulating the interaction of X-ray photons with the reflecting surfaces of a given focusing system. Although this approach has been widely exploited and proven to be effective, it would also be attractive to regard the same problem from an analytical viewpoint, to assess an optical design of an X-ray optical module with a simpler calculation than a ray-tracing routine. [...] We have developed useful analytical formulae for the off-axis effective area of a double-reflection mirror in the double cone approximation, requiring only an integration and the standard routines to calculate the X-ray coating reflectivity for a given incidence angle. [...] Algebraic expressions are provided for the mirror geometric area, as a function of the off-axis angle. Finally, the results of the analytical computations presented here are validated by comparison with the corresponding predictions of a ray-tracing code.Comment: 12 pages, 11 figures, accepted for publication in "Astronomy & Astrophysics", section "Instruments, observational techniques, and data processing". Updated version after grammatical revision and typos correctio

Characterization of multilayer stack parameters from X-ray reflectivity data using the PPM program: measurements and comparison with TEM results

Future hard (10 -100 keV) X-ray telescopes (SIMBOL-X, Con-X, HEXIT-SAT, XEUS) will implement focusing optics with multilayer coatings: in view of the production of these optics we are exploring several deposition techniques for the reflective coatings. In order to evaluate the achievable optical performance X-Ray Reflectivity (XRR) measurements are performed, which are powerful tools for the in-depth characterization of multilayer properties (roughness, thickness and density distribution). An exact extraction of the stack parameters is however difficult because the XRR scans depend on them in a complex way. The PPM code, developed at ERSF in the past years, is able to derive the layer-by-layer properties of multilayer structures from semi-automatic XRR scan fittings by means of a global minimization procedure in the parameters space. In this work we will present the PPM modeling of some multilayer stacks (Pt/C and Ni/C) deposited by simple e-beam evaporation. Moreover, in order to verify the predictions of PPM, the obtained results are compared with TEM profiles taken on the same set of samples. As we will show, PPM results are in good agreement with the TEM findings. In addition, we show that the accurate fitting returns a physically correct evaluation of the variation of layers thickness through the stack, whereas the thickness trend derived from TEM profiles can be altered by the superposition of roughness profiles in the sample image

Simbol-X Hard X-ray Focusing Mirrors: Results Obtained During the Phase A Study

Simbol-X will push grazing incidence imaging up to 80 keV, providing a strong improvement both in sensitivity and angular resolution compared to all instruments that have operated so far above 10 keV. The superb hard X-ray imaging capability will be guaranteed by a mirror module of 100 electroformed Nickel shells with a multilayer reflecting coating. Here we will describe the technogical development and solutions adopted for the fabrication of the mirror module, that must guarantee an Half Energy Width (HEW) better than 20 arcsec from 0.5 up to 30 keV and a goal of 40 arcsec at 60 keV. During the phase A, terminated at the end of 2008, we have developed three engineering models with two, two and three shells, respectively. The most critical aspects in the development of the Simbol-X mirrors are i) the production of the 100 mandrels with very good surface quality within the timeline of the mission; ii) the replication of shells that must be very thin (a factor of 2 thinner than those of XMM-Newton) and still have very good image quality up to 80 keV; iii) the development of an integration process that allows us to integrate these very thin mirrors maintaining their intrinsic good image quality. The Phase A study has shown that we can fabricate the mandrels with the needed quality and that we have developed a valid integration process. The shells that we have produced so far have a quite good image quality, e.g. HEW <~30 arcsec at 30 keV, and effective area. However, we still need to make some improvements to reach the requirements. We will briefly present these results and discuss the possible improvements that we will investigate during phase B.Comment: 6 pages, 3 figures, invited talk at the conference "2nd International Simbol-X Symposium", Paris, 2-5 december, 200

Development Status of Adjustable Grazing Incidence Optics for 0.5 Arcsecond X-Ray Imaging

We describe progress in the development of adjustable grazing incidence X-ray optics for 0.5 arcsec resolution cosmic X-ray imaging. To date, no optics technology is available to blend high resolution imaging like the Chandra X-ray Observatory, with square meter collecting area. Our approach to achieve these goals simultaneously is to directly deposit thin film piezoelectric actuators on the back surface of thin, lightweight Wolter-I or Wolter- Schwarschild mirror segments. The actuators are used to correct mirror figure errors due to fabrication, mounting and alignment, using calibration and a one-time figure adjustment on the ground. If necessary, it will also be possible to correct for residual gravity release and thermal effects on-orbit. In this paper we discuss our most recent results measuring influence functions of the piezoelectric actuators using a Shack-Hartmann wavefront sensor. We describe accelerated and real-time lifetime testing of the piezoelectric material, and we also discuss changes to, and recent results of, our simulations of mirror correction

Testing the robustness of controllers for self-adaptive systems

Self-Adaptive systems are software-intensive systems endowed with the ability to respond to a variety of changes that may occur in their environment, goals, or the system itself, by adapting their structure and behavior at run-time in an autonomous way. Controllers are complex components incorporated in self-adaptive systems, which are crucial to their function since they are in charge of adapting the target system by executing actions through effectors, based on information monitored by probes. However, although controllers are becoming critical in many application domains, so far very little has been done to assess their robustness. In this paper, we propose an approach for evaluating the robustness of controllers for self-adaptive software systems, aiming to identify faults in their design. Our proposal considers the stateful nature of the controller, and identifies a set of robustness tests, which includes the provision of mutated inputs to the interfaces between the controller and the target system (i.e., probes). The feasibility of the approach is evaluated on Rainbow, a framework for architecture-based self-adaptation, and in the context of the Znn.com case study

The future of Cybersecurity in Italy: Strategic focus area

This volume has been created as a continuation of the previous one, with the aim of outlining a set of focus areas and actions that the Italian Nation research community considers essential. The book touches many aspects of cyber security, ranging from the definition of the infrastructure and controls needed to organize cyberdefence to the actions and technologies to be developed to be better protected, from the identification of the main technologies to be defended to the proposal of a set of horizontal actions for training, awareness raising, and risk management

Towards Runtime Verification via Event Stream Processing in Cloud Computing Infrastructures

Software bugs in cloud management systems often cause erratic behavior, hindering detection, and recovery of failures. As a consequence, the failures are not timely detected and notified, and can silently propagate through the system. To face these issues, we propose a lightweight approach to runtime verification, for monitoring and failure detection of cloud computing systems. We performed a preliminary evaluation of the proposed approach in the OpenStack cloud management platform, an “off-the-shelf” distributed system, showing that the approach can be applied with high failure detection coverage

Maximizing Compressor Efficiency While Maintaining Reliability.

LecturePg. 91-100The natural gas and chemical processing industries have historically and necessarily demanded high reliability from their centrifugal compressors, which has led to a significant emphasis on field experience of designs. This emphasis has sometimes resulted in new units which reflect design and manufacturing practices which can be improved upon. Users can, in many cases, significantly increase efficiencies by considering designs which use more recently developed technologies that create only refinements of machines historically used in their applications. Accurately machined three-dimensional impellers are an example of an under-utilized available technology for multistage compressors. These designs used in several stages can provide significant efficiency gains, particularly at higher flows. At lower flows, impeller efficiencies can be improved by a process called abrasive flow machining. This process can provide similar benefits in process compressors by improving surface finish in areas that cannot be reached with conventional metal finishing techniques. Advancements in machine tool technology have also allowed changes in compressor casing designs. Numerical control (NC) machine tools can be used to machine inlets and variable area discharge volutes in the same axial casing space, thereby improving efficiencies through generous volute sizing without requiring additional diameter and bearing span. Specific examples of uses of these design and manufacturing technologies and comparisons to alternative designs are detailed. The data presented show that these technologies can be used with confidence to provide high compressor efficiencies while maintaining reliability