42 research outputs found
Pulsed electromagnetic field - a cultivation practice used to increase soybean seed germination and yield
The aim of the research was to test the effect of pulsed electromagnetic field (PEMF) on soybean seed germination and yield depending on specific field conditions, years of study, exposure duration and frequency. Field trial was conducted on an experimental field of Institute of Field and Vegetable Crops in Novi Sad, Serbia in 2010-2013. Seeds of the soybean (Glycine hispida (Moench)) medium-early cultivar. Valjevka 'were exposed to the PEMF therapy using the impulse generator and strip. Low-frequency (16, 24, 30 and 72 Hz) PEMF was used in the duration of 0, 30, 60 and 90 minutes. Research results indicate that this method can increase seed germination up to 8.00% and yield by 960.5 kg, or 21% in field conditions, which is a significant increase and a solid basis to introduce this practice, primarily in organic production with a very limited use of seed treatment preparations. However, the practice can have an inhibitory effect under an unfavourable combination of exposure duration and frequency. The obtained data were processed using the analysis of variance of three-factorial trials considering all years of study. Due to different meteorological conditions in the study years, analysis of variance was conducted for each year of study and correlations between the tested traits were examined
A new approach to radon temporal correction factor based on active environmental monitoring devices
The present study aims to identify novel means of increasing the accuracy of the estimated annual indoor radon concentration based on the application of temporal correction factors to short-term radon measurements. The necessity of accurate and more reliable temporal correction factors is in high demand, in the present age of speed. In this sense, radon measurements were continuously carried out, using a newly developed smart device accompanied by CR-39 detectors, for one full year, in 71 residential buildings located in 5 Romanian cities. The coefficient of variation for the temporal correction factors calculated for combinations between the start month and the duration of the measurement presented a low value (less than 10%) for measurements longer than 7 months, while a variability close to 20% can be reached by measurements of up to 4 months. Results obtained by generalized estimating equations indicate that average temporal correction factors are positively associated with CO2 ratio, as well as the interaction between this parameter and the month in which the measurement took place. The impact of the indoor-outdoor temperature differences was statistically insignificant. The obtained results could represent a reference point in the elaboration of new strategies for calculating the temporal correction factors and, consequently, the reduction of the uncertainties related to the estimation of the annual indoor radon concentration.Acknowledgements: The research is supported by the project ID P_37_229, Contract No. 22/01.09.2016, with the title, Smart Systems for Public Safety through Control and Mitigation of Residential Radon linked with Energy Efficiency Optimization of Buildings in Romanian Major Urban Agglomerations SMART-RAD-EN” of the POC Programme
An Innovative System for Monitoring Radon and Indoor Air Quality
Nowadays, a global trend towards increasing the performance of a building is the reduction in energy consumption. In this respect, for existing residential buildings the most common techniques are the application of a thermal insulation layer to the exterior wall of the building and / or window replacements. Unfortunately, their application without proper education of those involved may have a negative effect on the indoor air quality. The use of a continuous monitoring device can give the owner the ability to understand the impact of his behaviour on indoor air quality and, as such, to adjust his routine in order to maintain the indoor air quality at the desired level. This paper introduces a prototype, called ICA system, for continuous, real-time indoor air quality monitoring. The ICA system presents sensors for monitoring the concentration of radon, CO2, CO, VOCs, as well as meteorological parameters, such as temperature, pressure, and relative humidity. Experiments were performed both in laboratory and in situ conditions for testing and validating the proposed system.This work was supported by the project ID P_37_229, Contract No. 22/01.09.2016, with the title “Smart Systems for Public Safety through Control and Mitigation of Residential Radon linked with Energy Efficiency Optimization of Buildings in Romanian Major Urban Agglomerations SMART-RAD-EN” of the POC Programme
Validity of modified early warning, Glasgow Blatchford, and pre-endoscopic Rockall scores in predicting prognosis of patients presenting to emergency department with upper gastrointestinal bleeding
A prospective survey in European Society of Cardiology member countries of atrial fibrillation management: baseline results of EURO bservational Research Programme Atrial Fibrillation (EORP-AF) Pilot General Registry
Aims: Given the advances in atrial fibrillation (AF) management and the availability of new European Society of Cardiology (ESC) guidelines, there is a need for the systematic collection of contemporary data regarding the management and treatment of AF in ESC member countries. Methods and results: We conducted a registry of consecutive in- and outpatients with AF presenting to cardiologists in nine participating ESC countries. All patients with an ECG-documented diagnosis of AF confirmed in the year prior to enrolment were eligible. We enroled a total of 3119 patients from February 2012 to March 2013, with full data on clinical subtype available for 3049 patients (40.4% female; mean age 68.8 years). Common comorbidities were hypertension, coronary disease, and heart failure. Lone AF was present in only 3.9% (122 patients). Asymptomatic AF was common, particularly among those with permanent AF. Amiodarone was the most common antiarrhythmic agent used (~20%), while beta-blockers and digoxin were the most used rate control drugs. Oral anticoagulants (OACs) were used in 80% overall, most often vitamin K antagonists (71.6%), with novel OACs being used in 8.4%. Other antithrombotics (mostly antiplatelet therapy, especially aspirin) were still used in one-third of the patients, and no antithrombotic treatment in only 4.8%. Oral anticoagulants were used in 56.4% of CHA 2DS2-VASc = 0, with 26.3% having no antithrombotic therapy. A high HAS-BLED score was not used to exclude OAC use, but there was a trend towards more aspirin use in the presence of a high HAS-BLED score. Conclusion: The EURObservational Research Programme Atrial Fibrillation (EORP-AF) Pilot Registry has provided systematic collection of contemporary data regarding the management and treatment of AF by cardiologists in ESC member countries. Oral anticoagulant use has increased, but novel OAC use was still low. Compliance with the treatment guidelines for patients with the lowest and higher stroke risk scores remains suboptimal. © The Author 2013
THE CHALLENGE IN USING THE RETROSPECTIVE ASSESSMENT OF RESIDENTIAL RADON CONCENTRATION
Effect of bitumen type and polymer on physico-mechanical properties of asphalt pavement
Abstract
Currently, worldwide, different technologies or different materials are used to increase the performance of the asphalt mix. Depending on climate and traffic conditions, each country has adopted specific solutions that improve the behaviour of asphalt pavement over time. Because each of these products has a particular effect, it is not possible to add a product to the mix to improve all of its technical features. The performance of asphalt pavement depends on the optimal selection of basic materials: natural aggregates, filler, bitumen, polymer and fiber. The aim of this paper is to investigate the relationship between the constituents of the asphalt mixture and its physico-mechanical properties. Characteristic properties of bitumen used in the mixtures were determined by conventional bitumen tests and rheological tests according to SHRP. After optimum bitumen content was determined, the influence of the polymer in the mixture was studied. SMA mixes were prepared with different penetration grades bitumen, from different sources and performance tests were conducted in order to evaluate the behaviour of the mixtures.</jats:p
GIS, a tool for improving the road network management
Abstract
Transport is a significant branch of the economy due to its contribution to the creation of gross domestic product. In order to ensure a reliable transport network that boosts trade and economic growth, prior to the construction of new national roads and motorways, it is necessary to ensure a proper technical condition of the road. Therefore, road network administrators have to attain a balance between the program of maintenance / repair / rehabilitation activities and the works that can be executed within the limits of the available funds so that the investment achieves the highest profitability and the road network either viable. There are currently a number of factors that influence the decision-making process in prioritizing maintenance work as well as allocating funds so that the investment achieves the highest return. Therefore, a multi-criteria decision-making approach is needed to ensure a balance between the program of maintenance / repair / rehabilitation activities and the works that can be executed within the limits of available funds. In the present paper, the authors proposes to develop a decision support model based on the principles of the GIS information systems, to help the road network administrators to take decisions that prioritize the maintenance works.</jats:p
