Complete characterization of ultrashort pulse sources at 1550 nm

This paper reviews the use of frequency-resolved optical gating (FROG) to characterize mode-locked lasers producing ultrashort pulses suitable for high-capacity optical communications systems at wavelengths around 1550 nm, Second harmonic generation (SHG) FROG is used to characterize pulses from a passively mode-locked erbium-doped fiber laser, and both single-mode and dual-mode gain-switched semiconductor lasers. The compression of gain-switched pulses in dispersion compensating fiber is also studied using SHG-FROG, allowing optimal compression conditions to be determined without a priori assumptions about pulse characteristics. We also describe a fiber-based FROG geometry exploiting cross-phase modulation and show that it is ideally suited to pulse characterization at optical communications wavelengths. This technique has been used to characterize picosecond pulses with energy as low as 24 pJ, giving results in excellent agreement with SHG-FROG characterization, and without any temporal ambiguity in the retrieved puls

On the modulation instability development in optical fiber systems

Extensive numerical simulations were performed to investigate all stages of modulation instability development from the initial pulse of pico-second duration in photonic crystal fiber: quasi-solitons and dispersive waves formation, their interaction stage and the further propagation. Comparison between 4 different NLS-like systems was made: the classical NLS equation, NLS system plus higher dispersion terms, NLS plus higher dispersion and self-steepening and also fully generalized NLS equation with Raman scattering taken into account. For the latter case a mechanism of energy transfer from smaller quasi-solitons to the bigger ones is proposed to explain the dramatical increase of rogue waves appearance frequency in comparison to the systems when the Raman scattering is not taken into account.Comment: 9 pages, 54 figure

Magnetic shielding and exotic spin-dependent interactions

Experiments searching for exotic spin-dependent interactions typically employ magnetic shielding between the source of the exotic field and the interrogated spins. We explore the question of what effect magnetic shielding has on detectable signals induced by exotic fields. Our general conclusion is that for common experimental geometries and conditions, magnetic shields should not significantly reduce sensitivity to exotic spin-dependent interactions, especially when the technique of comagnetometry is used. However, exotic fields that couple to electron spin can induce magnetic fields in the interior of shields made of a soft ferro- or ferrimagnetic material. This induced magnetic field must be taken into account in the interpretation of experiments searching for new spin-dependent interactions and raises the possibility of using a flux concentrator inside magnetic shields to amplify exotic spin-dependent signals.Comment: 8 pages, 5 figure

Characterization of 1.55-μm pulses from a self-seeded gain-switched Fabry-Pérot laser diode using frequency-resolved optical gating

The intensity and frequency chirp of picosecond pulses from a self-seeded gain-switched Fabry-Perot laser diode have been directly measured using the technique of frequency-resolved optical gating. Measurements over an output sidemode suppression ratio (SMSR) range of 15-35 dB show that higher SMSR's are associated with an increasingly linear frequency chirp across the output pulses. This complete pulse characterization allows the conditions for optimum pulse compression to be determined accurately, and indicates that transform-limited, pedestal free pulses can be obtained at an SMSR of 35 dB

Characterization of high-dimensional entangled systems via mutually unbiased measurements

Mutually unbiased bases (MUBs) play a key role in many protocols in quantum science, such as quantum key distribution. However, defining MUBs for arbitrary high-dimensional systems is theoretically difficult, and measurements in such bases can be hard to implement. We show experimentally that efficient quantum state reconstruction of a high-dimensional multi-partite quantum system can be performed by considering only the MUBs of the individual parts. The state spaces of the individual subsystems are always smaller than the state space of the composite system. Thus, the benefit of this method is that MUBs need to be defined for the small Hilbert spaces of the subsystems rather than for the large space of the overall system. This becomes especially relevant where the definition or measurement of MUBs for the overall system is challenging. We illustrate this approach by implementing measurements for a high-dimensional system consisting of two photons entangled in the orbital angular momentum (OAM) degree of freedom, and we reconstruct the state of this system for dimensions of the individual photons from d=2 to 5.Comment: 8 page

Modulation control and spectral shaping of optical fiber supercontinuum generation in the picosecond regime

Numerical simulations are used to study how fiber supercontinuum generation seeded by picosecond pulses can be actively controlled through the use of input pulse modulation. By carrying out multiple simulations in the presence of noise, we show how tailored supercontinuum Spectra with increased bandwidth and improved stability can be generated using an input envelope modulation of appropriate frequency and depth. The results are discussed in terms of the non-linear propagation dynamics and pump depletion.Comment: Aspects of this work were presented in Paper ThJ2 at OECC/ACOFT 2008, Sydney Australia 7-10 July (2008). Journal paper submitted for publication 30 July 200

Characterization of nonlinear switching in a figure-of-eight fiber laser using frequency-resolved optical gating

The measurement technique of frequency-resolved optical gating is applied to determine the nonlinear switching characteristics of a passively modelocked figure-of-eight erbium-doped fiber laser. By completely characterizing the intensity and phase of the laser output pulses, the intracavity fields in the nonlinear amplifying loop mirror of the laser cavity are determined by numerical propagation using the nonlinear Schrodinger equation. Excellent switching of 95% can be achieved as a result of uniform phase characteristics developed by pulses propagating in the nonlinear amplifying loop mirror

Phase-coherent repetition rate multiplication of a mode-locked laser from 40 MHz to 1 GHz by injection locking

We have used injection locking to multiply the repetition rate of a passively mode-locked femtosecond fiber laser from 40 MHz to 1 GHz while preserving optical phase coherence between the master laser and the slave output. The system is implemented almost completely in fiber and incorporates gain and passive saturable absorption. The slave repetition rate is set to a rational harmonic of the master repetition rate, inducing pulse formation at the least common multiple of the master and slave repetition rates