430 research outputs found
Convective instability and mass transport of diffusion layers in a Hele-Shaw geometry
We consider experimentally the instability and mass transport of a
porous-medium flow in a Hele-Shaw geometry. In an initially stable
configuration, a lighter fluid (water) is located over a heavier fluid
(propylene glycol). The fluids mix via diffusion with some regions of the
resulting mixture being heavier than either pure fluid. Density-driven
convection occurs with downward penetrating dense fingers that transport mass
much more effectively than diffusion alone. We investigate the initial
instability and the quasi steady state. The convective time and velocity
scales, finger width, wave number selection, and normalized mass transport are
determined for 6,000<Ra<90,000. The results have important implications for
determining the time scales and rates of dissolution trapping of carbon dioxide
in brine aquifers proposed as possible geologic repositories for sequestering
carbon dioxide.Comment: 4 page, 3 figure
Arabidopsis peroxisome proteomics
The analytical depth of investigation of the peroxisomal proteome of the model plant Arabidopsis thaliana has not yet reached that of other major cellular organelles such as chloroplasts or mitochondria. This is primarily due to the difficulties associated with isolating and obtaining purified samples of peroxisomes from Arabidopsis. So far only a handful of research groups have been successful in obtaining such fractions. To make things worse, enriched peroxisome fractions frequently suffer from significant organellar contamination, lowering confidence in localization assignment of the identified proteins. As with other cellular compartments, identification of peroxisomal proteins forms the basis for investigations of the dynamics of the peroxisomal proteome. It is therefore not surprising that, in terms of functional analyses by proteomic means, peroxisomes are lagging considerably behind chloroplasts or mitochondria. Alternative strategies are needed to overcome the obstacle of hard-to-obtain organellar fractions. This will help to close the knowledge gap between peroxisomes and other organelles and provide a full picture of the physiological pathways shared between organelles. In this review, we briefly summarize the status quo and discuss some of the methodological alternatives to classic organelle proteomic approaches.Australian ResearchCouncil/CE0561495DF
Fragility and hysteretic creep in frictional granular jamming
The granular jamming transition is experimentally investigated in a
two-dimensional system of frictional, bi-dispersed disks subject to
quasi-static, uniaxial compression at zero granular temperature. Currently
accepted results show the jamming transition occurs at a critical packing
fraction . In contrast, we observe the first compression cycle exhibits
{\it fragility} - metastable configuration with simultaneous jammed and
un-jammed clusters - over a small interval in packing fraction (). The fragile state separates the two conditions that define
with an exponential rise in pressure starting at and an exponential
fall in disk displacements ending at . The results are explained
through a percolation mechanism of stressed contacts where cluster growth
exhibits strong spatial correlation with disk displacements. Measurements with
several disk materials of varying elastic moduli and friction coefficients
, show friction directly controls the start of the fragile state, but
indirectly controls the exponential slope. Additionally, we experimentally
confirm recent predictions relating the dependence of on . Under
repetitive loading (compression), the system exhibits hysteresis in pressure,
and the onset increases slowly with repetition number. This friction
induced hysteretic creep is interpreted as the granular pack's evolution from a
metastable to an eventual structurally stable configuration. It is shown to
depend upon the quasi-static step size which provides the only
perturbative mechanism in the experimental protocol, and the friction
coefficient which acts to stabilize the pack.Comment: 12 pages, 10 figure
Frustration and Melting of Colloidal Molecular Crystals
Using numerical simulations we show that a variety of novel colloidal
crystalline states and multi-step melting phenomena occur on square and
triangular two-dimensional periodic substrates. At half-integer fillings
different kinds of frustration effects can be realized. A two-step melting
transition can occur in which individual colloidal molecules initially rotate,
destroying the overall orientational order, followed by the onset of interwell
colloidal hopping, in good agreement with recent experiments.Comment: 6 pages, 3 postscript figures. Procedings of International Conference
on Strongly Coupled Coulomb Systems, Santa Fe, 200
Universal criterion for the breakup of invariant tori in dissipative systems
The transition from quasiperiodicity to chaos is studied in a two-dimensional
dissipative map with the inverse golden mean rotation number. On the basis of a
decimation scheme, it is argued that the (minimal) slope of the critical
iterated circle map is proportional to the effective Jacobian determinant.
Approaching the zero-Jacobian-determinant limit, the factor of proportion
becomes a universal constant. Numerical investigation on the dissipative
standard map suggests that this universal number could become observable in
experiments. The decimation technique introduced in this paper is readily
applicable also to the discrete quasiperiodic Schrodinger equation.Comment: 13 page
Bifurcations in annular electroconvection with an imposed shear
We report an experimental study of the primary bifurcation in
electrically-driven convection in a freely suspended film. A weakly conducting,
submicron thick smectic liquid crystal film was supported by concentric
circular electrodes. It electroconvected when a sufficiently large voltage
was applied between its inner and outer edges. The film could sustain rapid
flows and yet remain strictly two-dimensional. By rotation of the inner
electrode, a circular Couette shear could be independently imposed. The control
parameters were a dimensionless number , analogous to the Rayleigh
number, which is and the Reynolds number of the
azimuthal shear flow. The geometrical and material properties of the film were
characterized by the radius ratio , and a Prandtl-like number . Using measurements of current-voltage characteristics of a large number of
films, we examined the onset of electroconvection over a broad range of
, and . We compared this data quantitatively to
the results of linear stability theory. This could be done with essentially no
adjustable parameters. The current-voltage data above onset were then used to
infer the amplitude of electroconvection in the weakly nonlinear regime by
fitting them to a steady-state amplitude equation of the Landau form. We show
how the primary bifurcation can be tuned between supercritical and subcritical
by changing and .Comment: 17 pages, 12 figures. Submitted to Phys. Rev. E. Minor changes after
refereeing. See also http://mobydick.physics.utoronto.c
Quantum Films Adsorbed on Graphite: Third and Fourth Helium Layers
Using a path-integral Monte Carlo method for simulating superfluid quantum
films, we investigate helium layers adsorbed on a substrate consisting of
graphite plus two solid helium layers. Our results for the promotion densities
and the dependence of the superfluid density on coverage are in agreement with
experiment. We can also explain certain features of the measured heat capacity
as a function of temperature and coverage.Comment: 13 pages in the Phys. Rev. two-column format, 16 Figure
Properties of rf-sputtered indium-tin-oxynitride thin films
Indium-tin-oxide (ITO) and indium-tin-oxynitride (ITON) thin films have been fabricated by rf-sputtering in plasma containing Ar or a mixture of Ar and N-2, respectively. The structural, electrical and optical properties of ITON films were examined and compared with those of ITO films. The microstructure of ITON films was found to be dependent on the nitrogen concentration in the plasma. Increasing the amount of nitrogen in the plasma increased the resistivity and reduced the carrier concentration and mobility of the films. The electrical properties of the ITON films improved after annealing. The absorption edge of the ITON films deposited in pure N-2 plasma was shifted towards higher energies and showed reduced infrared reflectance compared to the respective properties of ITO films. The potential of indium-tin-oxynitride films for use as a transparent conductive material for optoelectronic devices is addressed
Statistical Properties of Turbulence: An Overview
We present an introductory overview of several challenging problems in the
statistical characterisation of turbulence. We provide examples from fluid
turbulence in three and two dimensions, from the turbulent advection of passive
scalars, turbulence in the one-dimensional Burgers equation, and fluid
turbulence in the presence of polymer additives.Comment: 34 pages, 31 figure
Whirling Hexagons and Defect Chaos in Hexagonal Non-Boussinesq Convection
We study hexagon patterns in non-Boussinesq convection of a thin rotating
layer of water. For realistic parameters and boundary conditions we identify
various linear instabilities of the pattern. We focus on the dynamics arising
from an oscillatory side-band instability that leads to a spatially disordered
chaotic state characterized by oscillating (whirling) hexagons. Using
triangulation we obtain the distribution functions for the number of pentagonal
and heptagonal convection cells. In contrast to the results found for defect
chaos in the complex Ginzburg-Landau equation and in inclined-layer convection,
the distribution functions can show deviations from a squared Poisson
distribution that suggest non-trivial correlations between the defects.Comment: 4 mpg-movies are available at
http://www.esam.northwestern.edu/~riecke/lit/lit.html submitted to New J.
Physic
- …
